Validation of performance of real-time kinematic PPP. A possible tool for deformation monitoring

Structural failures (bridge or building collapses) and geohazards (landslides, ground subsidence or earthquakes) are worldwide problems that often lead to significant economic and loss of life. Monitoring the deformation of both natural phenomena and man-made structures is a major key to assessing structural dynamic responses. Actually, this monitoring process is under real-time demand for developing warning and alert systems.One of the most used techniques for real-time deformation monitoring is the Global Navigation Satellite System (GNSS) real-time procedure, where the relative positioning approach, using a well-known reference station, has been applied.This study was conducted to evaluate the actual quality of the real-time kinematic Precise Point Positioning (PPP) GNSS solution for deformation monitoring, where it can be concluded that a promise tool is under development and should be taken into account on actual and near future real-time deformation monitoring studies and applications.     

Development of autonomous monitoring and performance evaluation system of grid-tied photovoltaic station

This work aims to improve the existing monitoring systems MS for two grid-connected PV stations GCPVS of URERMS ADRAR, to eliminate its limitations. This improvement consists of developing an MS which is used for two PV stations with different configurations. This MS contains new LabVIEW-based monitoring software for visualizing real-time measured data and evaluating GCPVS performance. In addition, it illustrates the 2D and 3D real-time relationships of PV system parameters, which allow us to understand the dynamic behavior of PV system components. This developed monitoring software synchronizes also the various data acquisition units DAU of GCPVS, allowing simultaneous data access.To perform a reliable performance analysis and a comparative study of different GCPVS based on accurate measurements, the sensor's calibration is performed with its DAU. The MS autonomy is ensured by integrating developed PV-UPS. A graphical user interface is provided for the evaluation of PV-UPS performance.     

能源实时监控与信息管理系统出现的问题及解决的方法

中国石化北京燕化石油化工股份有限公司动力事业部二供水车间电气改造完成后，能源实时监控与信息管理系统出现线路名称不统一、电流互感系数变比不起作用、数据查询功能及统计报表数据的准确性等问题，严重地影响系统的使用。通过对比分析，找到了出现问题的实质，对源代码进行修改，问题得到了解决。同时也成功地解决了其他部门遇到相类似的问题。     

Field Static Load Test on Kao-Ping-Hsi Cable-Stayed Bridge

Field load testing is an effective method for understanding the behavior and fundamental characteristics of a cable-stayed bridge. This paper presents the results of field static load tests on the Kao-Ping-Hsi cable-stayed bridge, the longest cable-stayed bridge in Taiwan, before it was open to traffic. A total of 40 loading cases, including the unit and distributed bending and torsion loading effects, were conducted to investigate the bridge behavior. The atmospheric temperature effect on the variations of the main girder deflections was also monitored. The results of static load testing include the main girder deflections, the flexural strains of the prestressed concrete girder, and the variations of the cable forces. A three-dimensional finite-element model was developed. The results show that the bridge under the planned load test conditions has linear superposition characteristics and the analytical model shows a very good agreement with the bridge responses. Further discussion of deflection and cable forces of the design specifications for a cable-stayed bridge is also presented.     

A comparison of three approaches for predicting C4 species cover of northern mixed grass prairie

The C4 composition of Canadian mixed-grass communities is more sensitive to environmental change than other grasslands. Reliable methods of detecting such changes are necessary if these landscapes are to be properly managed. One approach is to use satellite remote sensing systems. Various studies have shown that the asynchronous seasonality of C3 and C4 species allows the relative abundance of each photosynthetic type to be estimated using temporal trajectory indices (TTIs) of sensor-derived normalized difference vegetation index (NDVI). In this study, we compared three approaches for predicting C4 species cover at Grasslands National Park (GNP) (Saskatchewan, Canada). TTIs related to Approach I were calculated from plots of NDVI vs. day-of-year (DOY). TTIs related to Approach II were calculated from plots of normalized cumulative NDVI vs. growing degree day (GDD). TTIs related to Approach III were calculated as ratios of early-season NDVI to late-season NDVI. Our analyses were conducted at two separate ecological scales. A within-community analysis used field-sampled data from upland grassland to compare techniques at sampling resolutions of 0.5, 2.5, 10, and 50 m. An across-community analysis compared techniques using a vegetation survey of the GNP region and TTIs calculated from Advanced Very High Resolution Radiometer (AVHRR) data (1 km). At both scales, TTIs related to the timing of specific phenological events were the best predictors of C4 species cover. While all techniques performed well in the within-community study, Approach III performed best. Here, the predictive ability of each approach was weak at a resolution of 0.5 m but stronger at 2.5, 10, and 50 m resolutions. We also found that the optimal sampling dates for Approach III fell within a certain GDD range. This is encouraging for the a priori selection of sample dates, which would make the need for full seasonal time series redundant. In the across-community analysis, the AVHRR-derived Approach II TTIs were better able to discriminate among grasslands of different C4 composition than any other technique (overall accuracy=74%). However, for some C4 cover classes, the predictive accuracy of this approach was low. While these results are encouraging for the use of spectral data in monitoring the C4 cover of northern prairie, various research issues remain. At the within-community level, these include (a) further attempts to define objective criteria for the a priori identification of sampling dates for Approach III, and (b) and the extension of such studies to other growing seasons and community types/grassland regions. At the across-community level, these include the expansion of such techniques to a larger geographical region that contains a wider range in C4 cover values and land use types (e.g. ungrazed vs. grazed grasslands).     

Pesticide monitoring programme of the Ministry of Health of Brazil

The structure of the recently introduced Brazilian government programme for monitoring pesticide residues in six major agricultural products is described. Residues found from the analysis of samples of tomatoes and strawberries are discussed in detail. The much greater frequency of detection of pesticide residues, many of which are not approved for use in Brazil, in produce being sold on the domestic market, as opposed to that produced for export, is of major concern. It is perceived that this new monitoring programme will become permanent and be used to underpin enforcement actions that will need to be taken to reduce the numbers of incidents of illegal residues occurring, particularly in fresh fruits and vegetables.     

赴日无线电监测技术考察报告

首先介绍了日本总务省关东综合通信局电波监理部的情况，然后对日本安立公司生产的RR510A型无线电监测接收机和技术参数以及MS8609A型数字移动无线发射机测试仪的功能进行了分析和介绍。     

Modeling of Temperature–Frequency Correlation Using Combined Principal Component Analysis and Support Vector Regression Technique

A good understanding of environmental effects on structural modal properties is essential for reliable performance of vibration-based damage diagnosis methods. In this paper, a method of combining principal component analysis (PCA) and support vector regression (SVR) technique is proposed for modeling temperature-caused variability of modal frequencies for structures instrumented with long-term monitoring systems. PCA is first applied to extract principal components from the measured temperatures for dimensionality reduction. The predominant feature vectors in conjunction with the measured modal frequencies are then fed into a support vector algorithm to formulate regression models that may take into account thermal inertia effect. The research is focused on proper selection of the hyperparameters to obtain SVR models with good generalization performance. A grid search method with cross validation and a heuristic method are utilized for determining the optimal values of SVR hyperparameters. The proposed method is compared with the method directly using measurement data to train SVR models and the multivariate linear regression (MLR) method through the use of long-term measurement data from a cable-stayed bridge. It is shown that PCA-compressed features make the training and validation of SVR models more efficient in both model accuracy and computational costs, and the formulated SVR model performs much better than the MLR model in generalization performance. When continuously measured data is available, the SVR model formulated taking into account thermal inertia effect can achieve more accurate prediction than that without considering thermal inertia effect.     

Use of process signals for tool wear progression sensing in drilling small deep holes

Detailed knowledge about the relation between wear progression of a cutting tool and the cutting forces generated is of paramount importance for the development of a tool condition monitoring strategy. This paper discusses the changes in the different process signals with progressing tool wear of small diameter twist drills (D=1.5 mm), when drilling boreholes having a depth of 10 times the diameter in plain carbon steel using MQL. The effect of different wear patterns on the process signals is presented. Furthermore, several features, which evolve over the life of the drills, are identified and extracted from the process signals. Knowledge about the evolution of these features can support the user to determine the final tool life stage, so that the drill can be replaced before the final fracture occurs.     

基于Java RMI技术的大型机群监控系统的设计与实现

机群监控系统可有效的提高大型机群的可管理性和可用性。本文提出了一种基于JAVA RMI技术的机群监控系统模型，并给出其实现方法。该系统具有开发快速、可跨平台、易于扩展等特性。