Stress-deformable state of isotropic double curved shell with internal cracks and a circular hole

This work is devoted to the stress–strain state of isotropic double curved shell with defect system. The construction is weakened by two non-through thickness (internal) cracks of different length and by a circular hole located between cracks. In this study we use the line-spring model. Within the framework of this model cracks are modeled as mathematical cuts of shell’s middle surface. This leads to a two-dimensional problem. The problem is reduced to a system of eight boundary integral equations. To ensure the uniqueness of solution an additional equation is added. In the numerical solution of the problem special quadrature formulas for singular integrals of Cauchy type and the finite difference method are applied. The influence of defects on each other for double curved shell has been investigated. The given theoretical results can be used for the calculation of structural elements with holes, cracks on the strength and fracture toughness in various branches of engineering.     

Thermal and transport properties of as-grown Ni-rich TiNi shape memory alloys

Electrical resistivity, Seebeck coefficient, specific heat and thermal conductivity measurements on the Ti_50−xNi_50+x (x = 0.0–1.6 at.%) shape memory alloys are performed to investigate their thermal and transport properties. In this study, anomalous features are observed in both cooling and heating cycles in all measured physical properties of the slightly Ni-rich TiNi alloys (x ≤ 1.0), corresponds to the transformation between the B19′ martensite and B2 austenite phases. Besides, the transition temperature is found to decrease gradually with increasing Ni content, and the driving force for the transition is also found to diminish slowly with the addition of excess Ni, as revealed by specific heat measurements. While the signature of martensitic transformation vanishes for the Ni-rich TiNi alloys with x ≥ 1.3, the characteristics of strain glass transition start to appear. The Seebeck coefficients of these TiNi alloys were found to be positive, suggesting the hole-type carriers dominate the thermoelectric transport. From the high-temperature Seebeck coefficients, the estimated value of Fermi energy ranges from ∼1.5 eV (Ti_48.4Ni_51.6) to ∼2.1 eV (Ti₅₀Ni₅₀), indicating the metallic nature of these alloys. In addition, the thermal conductivity of the slightly Ni-rich TiNi alloys with x ≤ 1.0 shows a distinct anomalous feature at the B19′ → B2 transition, likely due to the variation in lattice thermal conductivity.     

乐滩灌区输水隧洞穿合山煤矿采空区处理设计

分析了乐滩灌区工程北干渠溯河隧洞段长约1.06 km穿合山煤矿采空区的地质情况.借鉴高速公路煤矿采空区的成功处理经验,通过科学分析,对采空区变形和区域内覆岩的稳定性做了评价,论述了输水线路穿采空区段采取全充填压力注浆法的工程处理方法.     

陶瓷及陶瓷基复合材料微缺陷的超声检测

为研究陶瓷及陶瓷基复合材料微缺陷的超声检测能力，针对一些人工缺陷试样进行了超声检测试验。试验主要采用了纵波垂直入射法和泄漏瑞利波法。通过试验结果，比较了两种方法的检测能力。     

有水气藏开发早期可采储量的评价方法

有水气藏是天然气藏中的一个基本气藏类型，其采收率受多种因素的影响，如地面集输压力、井筒混合气水流动的液柱压力和储层物性等，目前普遍采用经验取值、物质平衡和气藏数值模拟等方法进行研究，但由于受开发评价阶段试采资料偏少和气藏数值模拟无法模拟井筒流动等因素的影响，早期采收率计算往往偏差较大，针对这些问题，从气田开发一体化的特点出发，提出了一种全面考虑地层→井筒→地面流动条件下，有水气藏（含凝析有水气藏）发废弃压力的计算方法，发展了利用物质平衡早期预测有水气藏采收率的理论，方法可靠、适用性强，能够推广应用。     

钻曲轴斜油孔工装工艺参数的实用算法研究

总结了一套钻孔曲轴斜油孔工装工艺参数的实用计算公式，并举例说明。     

套管侧钻分支井钻井工程设计及应用原则

利用老井开窗侧钻分支井，可以提高原油采收率，增加产能和降低成本。对与分支井相关的分式设计。轨迹优化设计，钻柱设计，斜向器开窗方位的优化。开窗技术。轨迹控制应用等方面的主要原则进行了阐述。对进一步推广应用分支井技术，提高我国分支井钻井技术水平有一定的推动作用。     

Reconstruction of Mandibular Defect with Porous β-TCP/BMG Artificial Bone

1Introduction Reconstructivesurgeryisoneofthehottestre searchedsubjectsthatdealingwithbonedefects.Thetra ditionalmethodisimplantationoffreshautograftbonebe causeofitsnon immunoreactiveproperty.Butautologousbonewasnotabundantinsomecases.Sowefoundbeta trica…     

常规施工中不容忽视的几个环节

就毛石砌体的拉接处理、现浇混凝土柱、墙拉结筋的留设、砖混结构中构造柱的质量预控等几个环节进行了分析，提出只有在施工中采取必要的措施，才能保证施工质量。     

单层开采的圆形定压边界两层油藏压力动态分析

为更好地分析具有越流的多层油藏的压力动态，采用有效井径的概念，在半透壁模型的基础上建立了圆形定压边界、两层越流油藏单层开采时的渗流数学模型。通过拉氏变换得到了拉氏空间中以Bessel函数表示的精确解。数值反演计算结果表明，单层开采的两层油藏与全部打开的两层油藏的压力动态基本相同，都表现为3个阶段：早期是介于两个渗透层之间的均质流动；中间为过渡段，导数曲线出现下凹特征；晚期表现为整个油藏的均质特征。随着边界距离的增加，压力导数值趋近于0．5。半透率越大过渡段出现得越早。导数曲线下凹程度越小；储容比越大导数曲线峰值越小，导数曲线下凹程度越小；随着两层渗透率比值变小。过渡段变短，导数曲线下凹程度变小。图1参9