DST压恢法在大港油田的应用

非自喷井解释方法一直是困扰试井界的难题之一。自1995年底应用DKS2．0软件中DST压恢分析法先后处理了大港油田200多层实测资料以来，发现一部分井与常规分析法的处理结果完全不同。这些井多出现在均质无限大油藏，且其压力及压力导数曲线开口小、导数曲线驼峰较小。通过对DST压恢分析法在大港油田应用情况的分析，认为此方法适用于均质非自喷井，尤其是处理低渗且地层受污染井的结果比较符合地层的实际地质情况，其成果的应用对地层改造有一定的指导作用。     

The Role of Metastable Atoms in a Homogeneous Atmospheric Pressure Barrier Discharge in Helium

A one-dimensional fluid model for homogeneous atmospheric pressure barrier discharges in helium is presented by considering elementary processes of excitation and ionization including a metastable atom effect. Using this model we investigate the behaviours of the helium metastable atoms in discharges as well as their influence on the discharge characteristics. It is shown that the metastable atoms with a relatively high concentration during the discharge are mainly produced in the active phase of the discharge and dissolved in the off phase. It is also found that the metastable atom collisions can not only provide seed electrons for discharges but also influence the concentration of ions. A reduction of matestable atom density results in a drop in the charged particle densities and causes a qualitative change in the discharge patterns.     

聚酰亚胺渗透汽化膜的研究(Ⅰ)膜的制备和结构对动态吸附特性的影响

以2种二酐，3种二胺为单体，两步法制备了6种不同结构的聚酰亚胺均质膜，通过红外光谱和元素分析证实了其重复单元的分子结构，测定了这几种膜的物理性质和对水蒸气的动态吸附性能，并计算出其反常扩散指数dw。实验表明，随着聚合物二胺单元分子结构的变化，按MDA、ODA、PDA的顺序，密度逐渐变大，链间距逐渐减小，链堆砌变得紧密，水蒸气在膜中的吸附和扩散也变慢，并出现从正常扩散到反常扩散的过渡现象。     

On the microhardness testing of electrically stressed poly(phenylene oxide): Polystyrene blends

Microhardness measurements have been performed on untreated (virgin) and electrically stressed, solvent‐cast laboratory‐prepared samples of pure poly(phenylene oxide) (PPO), pure polystyrene (PS), and PPO : PS polyblends with different weight proportions. Results of such measurement on untreated polyblend sample show that microhardness (H_v) increases with increase in the content of PS up to 10 wt %, which attributed to the existence of homogeneous phase morphology. However, this feature is not observable in samples containing higher content of PS. Electrical stress is found to modify considerably the mechanical property of polymer. The effect of electric field on the microhardness of such samples (PPO : PS :: 90 : 10) has been characterized by the existence of a peak. Trapping of charge carriers in electrically stressed samples imparts hardening to the polyblend up to an applied step field of 190 kV/cm. However, the excessive charging beyond this step field value destroys this characteristic. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Perceptually Grounded Language Learning: Part 2—DETE: A Neural/Procedural Model

In Part 1 of this two-part series, we introduced Katamic memory—a neural network architecture capable of robust sequence learning and recognition. In Part 2, we introduce the Blobs World taskjdomain for language learning and describe the DETE language learning system, which is composed of over 50 Katamic memory modules. DETE currently learns small subsets of English and Spanish via association with perceptual! motor inputs. In addition to Kaiamic memory, DETE employs several other novel features: (1) use of feature planes, to encode visual shapes, spatial relationships and the motions of objects, (2) phase-locking of neural firing, in order to represent focus of atention and to bind objects across multiple feature planes, and (3) a method for encoding temporal relationships, so that DETE can learn utterances involving the immediate past and future. We compare DETE to related models and discuss the implications of this approach for language-learning research.     

纳米W-Cu粉末的均相沉淀法制备及其烧结性能

采用湿化学工艺--蒸氨均相沉淀法,制备了纳米CuWO4·2H2O/Cu2WO4(OH)2均相沉淀物,然后煅烧、还原,得到含Cu 30%的W-Cu复合粉.将该复合粉压坯在H2气氛中于不同温度下烧结后,对烧结体的微结构和物理、力学性能等进行了测试分析.实验结果表明:蒸氨均相沉淀法制备的W-Cu复合粉体具有纳米粒度和均匀的化学组成,其烧结活性高,在较低温度下烧结即可达很高的致密化程度.由上述W-Cu粉体所制备的烧结体具有良好的物理、力学性能.     

同质焊缝球墨铸铁焊条的研制

研制了一种适合于球墨铸铁与球墨铸铁以及球墨铸铁与结构钢焊接的专用球墨铸铁焊条，通过试验确定了球墨铸铁焊条的合金成分并给出了比较合理的焊芯和焊条药皮化学成分。采用该焊条对球墨铸铁焊接时，可以达到同质焊缝要求。测试结果表明，焊缝金属的化学成分、金相组织均满足焊接球墨铸铁的要求，焊缝的硬度在190～230HB之间，焊缝中石墨球化稳定，焊条具有良好的焊接工艺性能。     

Al/NiO复合粒子的制备与表征

以N i(NO3)2.6H2O和CO(NH2)2为主要原料,通过均匀沉淀法,90℃恒温12 h,异相成核,在片状金属铝粉表面包覆一层N i2CO3(OH)2,制备出包覆式复合粒子A l/N i2CO3(OH)2。将复合粒子在马弗炉中400℃恒温灼烧2 h,制备出了A l/N iO复合粒子。通过SEM、XRD及粒度测试等分析方法,对复合粒子的形貌、晶体结构及粒径进行了表征。     

纳米棒状氧化铁红的制备及表征

以尿素为沉淀剂,采用缓慢滴加方式,用均匀沉淀法制备了纳米棒状氧化铁红。考察了Fe^2＋浓度、反应时间、反应温度、尿素与Fe^2＋物质的量比等因素对产品粒径、形貌及收率的影响,并用TG,XRD,IR,UV-VIS,TEM等对样品进行了表征。确定了制备纳米棒状氧化铁红的最佳工艺条件：Fe^2＋浓度为0.50 mol/L,反应时间为180 min,反应温度为80℃,尿素与Fe^2＋物质的量比为20∶1,在此条件下制得前驱体,将前驱体在350℃下煅烧2 h,即可得到纳米棒状氧化铁红。样品的XRD,TEM表征结果为六方晶系的纳米棒状α-Fe2O3,其长轴约为300-500 nm,短轴约为20-40 nm,产品收率为75.90%,颜色为鲜红色,含质量分数5%样品的清漆对紫外线具有很好的吸收性能,而对可见光具有良好的透明性,其透光率在85%以上,可作为透明氧化铁红颜料使用。     

纳米铜锰复合氧化物固相反应法的制备与表征

以乙酸铜、乙酸锰与草酸为原料,采用固相化学反应法制备了纳米铜锰复合氧化物前驱物,利用均匀设计考察了微波功率与加热时间、热分解温度及时间对产物粒径的影响。研究表明热分解温度对产品粒径的影响最大。最小粒径产物的制备条件是：微波功率540 W,微波加热时间15 min;热分解温度370℃,热分解时间2 h。XRD和TEM分析结果表明,此产品主要物相为Cu1.5Mn1.5O4,结构属立方晶系,空间群为Fd3m,平均粒径16.9-19.0 nm。应用TG-DTG和DSC技术研究了纳米铜锰复合氧化物的热分解过程以及热分解动力学,采用Ozawa积分法和Coats-Redfern积分法得前驱体的热分解机理函数均为G（α）=[-ln（1-α）]^2/3。