Elucidation of colour development and microstructural characteristics of Allium sativum fumigated with acetic acid

It has been well known that the greening of Allium sativum cloves could be formed after immersed in acetic acid solution. Nonetheless, no investigation was reported on colour development of A. sativum in response to acetic acid vapour until now. In this study, the brief exposure of A. sativum to acetic acid vapour (200–400 ppm) was combined with controlled atmosphere (5%, 20% and 80% CO₂) packaging storage to break cell membrane and green garlic. The garlic bulbs were fumigated with acetic acid before controlled CO₂ atmosphere packaging for 25 days at 4 °C. Fumigation with 200 ppm acetic acid followed by high CO₂ atmosphere packaging (80% CO₂) facilitated the garlic greening. It was also verified that γ‐glutamyl transpeptidase was involved in garlic greening in present study, and the compromise of glacial acetic acid vapour fumigation and CO₂ gas atmosphere in package stored at low temperature could result in garlic greening as well.     

Encapsulation of PV modules using ethylene vinyl acetate copolymer as a pottant: A critical review

The primary purpose of this work is to review the literature about what is and is not known about using ethylene vinyl acetate (EVA0 copolymer as the encapsulant (or pottant) material in photovoltaic (PV) modules. Secondary purposes include elucidating the complexity of the encapsulation problem, providing an overview about encapsulation of PV cells and modules, providing a historical overview of the relevant research and development on EVA, summarizing performance losses reported for PV systems deployed since ca. 1981, and summarizing the general problems of polymer stability in a solar environment. We also provide a critical review of aspects of reported work for cases that we believe are important.Failure modes resolved in the early work to establish reliability of deployed modules and the purposes and properties of pottants, are summarized. Typical performance losses in large field-deployed, large-scale systems ranging from 1% to 10% per year are given quantitatively, and qualitative reports of EVA discoloration are summarized with respect to ultraviolet (UV), world-wide location and site dependence.The general stability of polymers and their desirable bulk properties for solar utilization are given. The stabilization formulation for EVA, its effectiveness, and changes in it during degradation are discussed. The degradation mechanisms for the base resin, e.g., unstabilized Elvax 150^TM, and stabilized EVA are indicated for literature dating to the early 1950s, and the role played by unsaturated chromophores is indicated. The limited number of studies relating discoloration and PV cell efficiency are summarized.Observed degradation of EVA or the unstabilized base resin in the laboratory and examples used to measure the degradation are summarized in sections entitled: (1) thermally-induced degradation; (2) photodegradation and photothermal degradation of EVA in different temperature regimes; (3) photobleaching and photodegradation of the UV absorber and cross-linking agent; (4) acetic acid and metal and metal-oxide catalyzed oxidative degradation; and (5) discolaration and PV cell efficiency losses.Processing effects/influences on EVA stability are discussed in sections entitled: (1) EVA raw materials and extruded, uncured films; (2) thermal encapsulation processes; (3) effects of lamination, curing, and curing peroxide on gel content and chromophores formed; and (4) incomplete shielding of curing-generated chromophores. A summary is given for the limited number of accelerated lifetime testing efforts and examples of erroneous service lifetime predictions for EVA are discussed. The known factors that effect the discoloration rate of several EVA formulations are discussed in which the reduction in rate by using UV-absorbing superstrates is a prime example. A summary is given of what is and is not known about EVA degradation mechanisms, degradation from exposures in field-deployed modeules and/or laboratory testing, and factors that contribute to EVA stability or degradation. Finally, conclusions about using Elvax 150 in EVA formulations are summarized, and future prospects for developing the next-generation pottant for encapsulating PV modules are discussed.     

Influence of wood extractives on the photo‐discoloration of wood surfaces exposed to artificial weathering

Extracted and unextracted black cherry (Prunus serotina), red oak (Quercus rubra), and red pine (Pinus resinosa) wood specimens were exposed to artificial weathering, and their discoloration process was investigated to obtain basic understanding on the role of wood extractives in the weathering of hardwoods and softwoods. Color measurements were made with a spectrometer according to ISO 2470 standards, using the CIELAB system. Results obtained showed that the rate of whiteness was not significantly affected by extractives removed with organic solvents, but were significantly affected when organic solvent extraction was followed by water extraction. The total discoloration rate had the same pattern, and chromaticity coordinates were less affected by wood extractives. These results confirm the hypothesis that some extractives contained in wood act as antioxidants and are able to provide some protection to wood surfaces against weathering degradation. However, more work is needed to understand the chemistry and mechanism of action of these extractives so as to develop any practical use for this property. © 2006 Wiley Periodicals, Inc. Col Res Appl, 31, 425–434, 2006; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20248     

载银无机抗菌剂变色抑制剂研发现状

介绍了载银无机抗菌剂变色抑制剂如甲基苯并三唑、天然水滑石和合成水滑石等的研发现状     

浅析聚乙烯装置后部造粒对粒料颜色的影响

分析了气相法生产线性低密度聚乙烯(LLDPE)装置粒料颜色变黄的原因，从工艺条件、造粒设备、添加剂等几方面提出了改进措施。     

Effects of gold plating on the resistance to high temperature discoloration of the cavity for ceramic packages

The effects of thickness and types of gold plating on the resistance to high temperature discoloration of gold plating on cavity surface of ceramic package were investigated. It was found that the thicker gold plating, the less discoloration degree for ceramic packages. Non-cyanide gold plating performed better resistance to high-temperature aging than cyanide gold plating. The relationship between the gold plating thickness and the amount of diffused Ni to the gold plating of ceramic packages with Au/Ni and Au/Ni-Co platings after heating at 420℃for 15 min was also studied. When the gold plating thickness reach 2.0 μm and 1.6 μm for Au/Ni and Au/Ni-Co plating systems, respectively, no discoloration was observed on the gold plating surface of cavity, and the corresponding diffused Ni amounts (mass fraction) are 1.0% and 0.4%, while the diffused Co to the gold plating is 0.04%.     

Effect of vacuum ageing on quality changes of lamb steaks from early fattening lambs during aerobic display

The effects of vacuum ageing on the quality changes of lamb steaks during retail display were assessed. Biceps femoris and Quadriceps femoris muscles from thirty early fattening lambs fed barley straw and concentrate or alfalfa and concentrate were used. Half of the muscles were vacuum aged for three weeks (VA), and the other half were not aged (control). Control and VA muscles were sliced and aerobically displayed. Weight loss, pH, aldehyde contents, instrumental color characteristics and color acceptance were measured at display days 1, 3, 7 and 14. At day 1 redness was higher in VA lamb. However, redness of VA lamb decreases more rapidly during further storage. Redness and color acceptance decreased in VA lamb from day 3, whereas in not-aged lamb the decrease was observed from day 7 onwards. From days 7 to 14 a drop of color acceptance accompanied by an increase in pH and a decrease in lightness was observed in control and VA lamb.     

凹凸棒土与活性炭对水溶性染料的吸附研究

研究了凹凸棒土与活性炭对水溶性染料亚甲基蓝和弱酸艳蓝RAW的吸附作用，考察了各种因素对吸附效果的影响．结果表明：升高温度、增加pH值均有利于凹凸棒土对亚甲基蓝的吸附，不利于其对弱酸艳蓝RAW的吸附,温度升高，活性炭对2种染液的脱色率均有提高；酸性条件有利于活性炭对亚甲基蓝的吸附，而碱性条件有利于其对弱酸艳蓝RAW的吸附．达到同等处理效果，凹凸棒土用量明显少于活性炭,除活性染料外，凹凸棒土对其他染料的脱色性能均优于活性炭．     

采用褪色光度法测定维生素C

在硫酸介质中,利用维生素C（L-VC）对高锰酸钾的褪色效应建立了褪色光度法测定维生素C的方法。在最大吸收波长为526nm,表观摩尔吸收系数为6.71×103L·mol-1·cm-1时,维生素C浓度在0～20μg/ml范围内与溶液的褪色程度（△A）服从比尔定律,最小检出限为0.91mg/L,相对标准偏差为0.54%～0.96%,回收率为92.5%～101.8%。