2.4GHz动态CMOS分频器的设计

对现阶段的主流高速CMOS分频器进行分析和比较,在此基础上设计一种采用TSPC(truesingle phase clock)和E-TSPC(extended TSPC)技术的前置双模分频器电路.该分频器大大提高了工作频率,采用0.6μm CMOS工艺参数进行仿真的结果表明,在5V电源电压下,最高频率达到3GHz,功耗仅为8mW.     

铝－锂合金中δ’（Al＿3Li）沉淀相时效粗化行为及体积分数的测定

对经固溶处理的二种Ａｌ－Ｌｉ合金（１．９４ｗｔ．％Ｌｉ和２．７５ｗｔ．％Ｌｉ）的时效过程进行了研究。结果表明：δ’的生长速率遵从Ｏｓｔｗａｒｄ粗化动力学。１．９４ｗｔ．％Ｌｉ合金δ’产生于时效过程中，而２．７５ｗｔ．％Ｌｉ合金的δ’产生于时效的前期阶段。前者的表现体积分数明显大于根据相图估算的数伍，真实体积分数则与此值接近；后者的体积分数低于根据相图估算的数值，这可能归咎于δ’固相线的位置、统计学误差及Ｌｉ更易在时效过程中贫化。     

Thermomechanical Models of Irreversible Finite Deformation of Anisotropic Solids

The proposed models for irreversible finite deformation of initially anisotropic solids are based on the hypothesis of the parameters of state, for which the authors have chosen a universal parameter (temperature) and a strain component, which is analogous to volume strains in an isotropic body and represents thermal strains of an unconstrained (stress-free) anisotropic solid. The application of this hypothesis allows the strain tensor to be resolved into a reversible and irreversible components. For irreversible processes of finite deformation of hardenable materials, the authors have proposed a deformation-type model, which makes it possible to describe a change in the type of anisotropy of initially anisotropic materials in the course of deformation. For the flow-theory-type model, the limiting state function, as given in the space of irreversible strains, allows for the experimentally observed plastic flow of anisotropic crystals under the action of hydrostatic pressure only.     

Reasoning, Integration, Inference Alteration, and Text Comprehension.

This paper reports how the study of formal logical reasoning provides insight into more everyday types of reasoning, such as that involved in language comprehension. Both of these types of cognition are thought to involve the use of mental models, and so it is reasonable to think that the cognitive operations needed for formal logical reasoning would be involved in everyday reasoning as well. We focused on three aspects of formal reasoning: (a) the integration of information into a common mental model, (b) the drawing of inferences, and (c) the coordination of alternative possibilities. We were able to show that the integration and inference components were related to narrative comprehension processes, but the coordination of alternative models was not. Thus, there is evidence for some overlap in the mental processes used in formal and everyday reasoning. This further justifies the study of formal logical reasoning as a window into certain types of everyday reasoning. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

On the algebraic formulation of certain geometry statements and mechanical geometry theorem proving

In this paper we analyze the algebraic formulations of certain geometry statements appearing in recent literature related to mechanical geometry theorem proving and give several examples to show that one of these formulations can cause serious problems. We clarify a formulation which is essentially due to W. T. Wu and, in our opinion, is the most satisfactory.This author was supported by NSF Grants DCR-8503498 and CCR-8702108.     

品种和加工方式对双低菜粕有效能和氨基酸有效性的影响_注

用精确饲喂技术评价了 3个品种的中国双低油菜和 1个加拿大卡诺拉的脱脂种籽和商品饼粕的能量和氨基酸的有效性。结果表明 ,4个脱脂种籽的氮校正真代谢能和氨基酸真消化率没有差异 (P >0 .0 5 ) ;而 4个商品饼粕的脱脂样品的氮校正真代谢能和氨基酸真消化率有极显著或显著差异。研究结果证实 ,不适当的加工方式不仅降低了氨基酸的有效性 ,而且影响家禽对能量的利用效率。     

等径侧向挤压应变分析

对等径侧向挤压变形的应变进行了深入的分析，应用平面纯剪切变形应变分析的结果，得到了等径侧向挤压变形真应变和等效真应变的计算公式，分析了循环等径Ｓ型侧向挤压真空应变和等效真应变的变化规律。     

煤液化油实沸点蒸馏的模拟实验

采用TD200简易蒸馏装置对石油醚和液体石蜡进行了实沸点蒸馏，得到实沸点蒸馏数据，并绘制了实沸点蒸馏曲线和各馏分质量百分数与温度关系曲线，得出主要馏分所在的沸程分别为石油醚64．5℃～68℃，液体石蜡412℃～420℃；同时计算出了二者的平均沸点为65.73℃和404．36℃．这些曲线及数据不仅对石油醚和液体石蜡的组成和使用性能有参考价值，而且这种分析方法为煤液化油的实沸点蒸馏奠定了基础。     

考虑中主应力效应Gudehus-Bauer亚塑性模型的改进

针对Gudehus-Bauer亚塑性模型不能考虑中主应力影响,在Gudehus提出的响应包络线理论基础上,提出了在模型的非线性项乘以一个考虑中主应力的因子进行改进.这种改进增加了土体剪切时的强度,改变了土体受压时的变形.新模型对中主应力的变化在中主应力参数影响程度能够有一定反映.同时将改进后的模型与中主应力参数为常量的真三轴实验进行了比较.结果表明改进后的模型可以模拟中主应力对砂土强度和变形特性的影响,能够定量预测由于中主应力影响产生的体积应变.     

脉冲加热方法铌热物性参数的动态测量

提出积分球反射法脉冲加热技术测量材料热物性的方法,研制的脉冲加热瞬态热物性测量装置能同时测量铌带状试样温度范围在1100-2700K的比热容、电阻率、全波长半球发射率.装置中高速高温计测量试样的辐射温度,积分球反射计测量试样的法向光谱发射率,即可得出带状试样的真实温度.再通过测得的试样上的电压、电流等数据经计算获得其他热物性参数.对国外的标准铌试样进行了测试,所得测量数据与国外同行数据进行了比对,具有较好的一致性.实验结果表明:比热容测量不确定度为5%,全波长半球发射率测量不确定度为3.5%,电阻率的测量不确定度为3.6%,测量数据可作为航天、军事和民用领域材料应用的设计依据.