降低紧密纺色织物浆纱断头的几项措施

为了降低紧密纺色织品种的浆纱断头,提高产品质量,分析了该品种在浆纱过程中产生断头的原因,介绍了在操作方面应采取的措施及在工艺方面应注意的问题.通过适当加大干分绞区张力及前浆槽纱线的喂入张力、预烘张力,单独控制前浆槽的浆液粘度,确保回潮率满足工艺要求,有效解决了紧密纺色织品种浆纱断头问题,提高了织轴质量.     

The topographic normalization of hyperspectral data: implications for the selection of spectral end members and lithologic mapping

Compact Airborne Spectrographic Imager (CASI) hyperspectral data is used to investigate the effects of topography on the selection of spectral end members, and to assess whether the topographic correction improves the discrimination of rock units for lithologic mapping. A publicly available Digital Elevation Model (DEM), at a scale of 1:50,000, is used to model the radiance variation of the scene as a function of topography, assuming a Lambertian surface. Skylight is estimated and removed from the airborne data using a dark object correction. The CASI data is corrected on a pixel-by-pixel basis to normalize the scene to a uniform solar illumination and viewing geometry. The results show that topography has the effect of expanding end member clusters at times resulting in the overlap of clusters and that the correction process can effectively reduce the variation in detected radiance due to changes in local illumination. When topographic effects are embedded in the hyperspectral data, methods typically used for the selection of end members, such as the convex hull method, can miss end members or result in the selection of nonrepresentative pixels as end members. Thus, end members selected by some conventional methods are very likely “incomplete” or “nonrepresentative” if the topographic effect is embedded in the data. As shown in this study, the topographic correction can reveal hidden end members and achieve a better representation of end members via the statistical center of isolated clusters.     

化学结构式的拓扑描述

化学结构式的拓扑描述,是化学信息计算机化的手段之一。这里系统地建立了一整套的连接表(三类:紧缩连接表、冗余连接表、和连接方阵),用来进行结构式中原子之间连接关系的拓扑描述,对分子结构进行数值化。同时,阐述了连接表唯一化的方法,并介绍了不同类型连接表之间的转换关系和还原为平面结构式图形的绘图程序。     

Short-term power sources for tokamaks and other physical experiments

The Compass-D tokamak is being planned to move from UKAEA Culham (England) be and reinstalled in IPP Prague (Czech Republic). An overview of Compass-D energetics is described in short. The new power sources have to be designed. Alternative solutions of power sources have been investigated. Ignitrons and mechanical breakers can be replaced by modern high-power semiconductors. With respect to the need of accumulated energy, new technologies of energy storage - supercapacitors and high-speed flywheels, not applied up to now in similar fusion projects, are characterized in comparison with traditional ones - capacitors and big motor-flywheel generators. It is shown that these technologies enhance possibilities in arrangement of power supplies for tokamaks as well as for other high-power demanding experiments with pulse length from fraction to tens of seconds.     

Compact and localized distributed data structures

This survey concerns the role of data structures for compactly storing and representing various types of information in a localized and distributed fashion. Traditional approaches to data representation are based on global data structures, which require access to the entire structure even if the sought information involves only a small and local set of entities. In contrast, localized data representation schemes are based on breaking the information into small local pieces, or labels , selected in a way that allows one to infer information regarding a small set of entities directly from their labels, without using any additional (global) information. The survey concentrates mainly on combinatorial and algorithmic techniques, such as adjacency and distance labeling schemes and interval schemes for routing, and covers complexity results on various applications, focusing on compact localized schemes for message routing in communication networks.Received: August 2001, Accepted: May 2002, Supported in part by a grant from the Israel Science Foundation.     

加速国内电弧炉工艺技术的发展

提出以紧凑式电炉流程模式对国内电炉钢厂进行改造，以及加强大型电炉冶炼工艺技术研究的建议。     

紧凑 Tokamak(球形环)聚变堆第一壁及中心导体柱上中子负荷及核热计算与分析

采用通用蒙特卡罗粒子输运程序ＭＣＮＰ／３８计算低环径比Ｔｏｋａｍａｋ（紧凑环或球形环）聚变堆第一壁及中心导体上的中子壁负荷分布和核热沉积分布，并与常规Ｔｏｋａｍａｋ堆第一壁上中子壁负荷分布和核热沉积分布进行比较、分析。结果表明，在中子壁负荷归一化为１ＭＷ／ｍ２时，与常规Ｔｏｋａｍａｋ相比，在低环径比Ｔｏｋａｍａｋ堆第一壁及中心柱表面上中子壁负荷分布峰值并不比常规Ｔｏｋａｍａｋ堆第一壁上的峰值高，而且低于低环径比Ｔｏｋａｍａｋ堆整个第一壁上的平均值，而中心柱上的核热沉积峰值稍高于常规Ｔｏｋａｍａｋ堆第一壁上的核热沉积峰值，但对较高中子壁负荷情况，中心导体柱上的核热沉积和辐照损伤仍可能是比较严重和值得特别研究的问题。     

Design of noise and period-time robust high-order repetitive control, with application to optical storage

Repetitive control is useful if periodic disturbances or setpoints act on a control system. Perfect (asymptotic) disturbance rejection is achieved if the period time is exactly known. The improved disturbance rejection at the periodic frequency and its harmonics is achieved at the expense of a degraded system sensitivity at intermediate frequencies. A convex optimization problem is defined for the design of high-order repetitive controllers, where a trade-off can be made between robustness for changes in the period time and for reduction of the error spectrum in-between the harmonic frequencies. The high-order repetitive control algorithms are successfully applied in experiments with the tracking control of a CD-player system.     

Evaporative Heat Transfer of Annular Two-phase Flow of Air-water in a Small Vertical Tube

The evaporative heat transfer of the non-boiling annular two-phase flow of air-water in a small vertical tube with uniform wall heat flux was studied both theoretically and experimentally. A simplified two-phase flow boundary layer model was used to calculate the thickness of the water film attached to the wall, and from the liquid film thickness the evaporative heat transfer coefficients of the annular two-phase flow were obtained. Theoretical equations and semi-theoretical equations were proposed for predicting the evaporative heat transfer of the annular two-phase flow of air-water in a small vertical tube. The semi-theoretical prediction agrees well with the experimental data. The mechanism of the heat transfer enhancement is the evaporation of the thin liquid film attached on the wall.