Comparison of co-current and counter-current flow in a bifunctional reactor containing ammonia synthesis and 2-butanol dehydrogenation to MEK

In this study, a multi-tubular thermally coupled packed bed reactor in which simultaneous production of ammonia and methyl ethyl ketone (MEK) takes place is simulated. The simulation results are presented in two co-current and counter-current flow modes. Based on this new configuration, the released heat from the ammonia synthesis reaction as an extremely exothermic reaction in the inner tube is employed to supply the required heat for the endothermic 2-butanol dehydrogenation reaction in the outer tube. On the other hand, MEK and hydrogen are produced by the dehydrogenation reaction of 2-butanol in the endothermic side, and the produced hydrogen is used to supply a part of the ammonia synthesis feed in the exothermic side. Thus, 30.72% and 31.88% of the required hydrogen for the ammonia synthesis are provided by the dehydrogenation reaction in the co-current and counter-current configurations, respectively. Also, according to the thermal coupling, the required cooler and furnace for the ammonia synthesis and 2-butanol dehydrogenation conventional plants are eliminated, respectively. As a result, operational costs, energy consumption and furnace emissions are considerably decreased. Finally, a sensitivity analysis and optimization are applied to study the effect of the main process parameters variation on the system performance and obtain the minimum hydrogen make-up flow rate, respectively.     

一种基于Normal基椭圆曲线密码芯片的设计

文章设计了一款椭圆曲线密码芯片。实现了GF（2^233）域上normal基椭圆曲线数字签名和认证。并支持椭圆曲线参数的用户配置。在VLSI的实现上，提出了一种新的可支持GF（2^233）域和GF（p）域并行运算的normal基椭圆曲线VLSI架构。其架构解决了以往GF（p）CA算迟后于GF（2^233）域运算的问题，从而提高了整个芯片的运算吞吐率。基于SMIC 0．18μm最坏的工艺，综合后关键路径最大时延3．8ns，面积18mm^2；考虑布局布线的影响，芯片的典型的情况下，每秒可实现8000次签名或4500次认证。     

A multigrid accelerated hybrid unstructured mesh method for 3D compressible turbulent flow

 A cell vertex finite volume method for the solution of steady compressible turbulent flow problems on unstructured hybrid meshes of tetrahedra, prisms, pyramids and hexahedra is described. These hybrid meshes are constructed by firstly discretising the computational domain using tetrahedral elements and then by merging certain tetrahedra. A one equation turbulence model is employed and the solution of the steady flow equations is obtained by explicit relaxation. The solution process is accelerated by the addition of a multigrid method, in which the coarse meshes are generated by agglomeration, and by parallelisation. The approach is shown to be effective for the simulation of a number of 3D flows of current practical interest. Sponsored by The Research Council of Norway, project number 125676/410 Dedicated to the memory of Prof. Mike Crisfield, a respected colleague     

Suspension force and mechanism of debris flows

The paper discusses the postulated suspension force, by which it is possible to explain some enigmatic phenomena observed in different types of mass movements. This force is generated in thick suspensions as a result of friction between sinking solid particles and static water. The suspension force is related to the seepage force but they have opposite directions. Both forces form flow networks. Having explained the suspension force, the paper describes how this influences the movement of material, particularly in debris flows. Enigmatic features and the mechanism of debris flows and lahars are explained by virtue of the suspension force. Electronic Publication     

Salt-water up-coning during extraction of fresh water from a tropical island

Rainwater can collect in a lens-shaped region within the rock of a tropical island, and may be separated from the underlying salt water by a sharp interface. This paper presents a nonlinear theory for determining the shape of this interface. The island is assumed to be saturated with rain, and provision is made for the outflow of rain-water through the sides of the island. The effect of a bore well on the shape of the interface is investigated, and the problem is solved using a spectral method. An integral-equation method is also presented for the case when the island has infinite width.     

Interaction of free-surface waves with floating flexible strips

The method developed by the author to derive a set of algebaic equations to solve the interaction of free-surface waves with a single floating rigid or flexible two-dimensional platform with small draft is extended to the case that the platform consists of strips with different constant flexural rigidity and mass. The method is based on the application of Green's theorem, with a specific choice of the Green function to arrive at a differential-integral equation along the platform. This equation can be solved exactly by means of superposition of exponential functions, a standard method to solve a set of linear differential equations. After integration with respect to the space coordinate the residue theorem leads to both the dispersion relation along each individual strip and an algebraic equation for the coefficients. Due to very fast convergence with respect to the number of coefficients taken into account the series are truncated. Depending on the water-depth, in each series three to ten terms are taken into account. Results are shown for a structure consisting of several strips that are tightly connected and for disjoint strips. In the latter case the computation of the water level between the strips is also computed. The water level and the reflection and transmission coefficients are not unknowns in the algebraic equation, but are computed afterwards by means of Green's theorem.     

水电站复杂输水系统恒定流的数值计算

对单元总体方程进行了局部修改，使方程的求解具有唯一性和更高的可靠性。提出水电站恒定流数值计算只有四种给定条件，每种条件都能保证计算结果的唯一性；计算实例证明，相同工况条件下根据四种给定条件求解的计算结果非常吻合。     

Coupling of free surface and groundwater flows

In this paper we present some preliminary results about the coupling of shallow water equations for free surface flows and Darcy equation for groundwater flows. A suitable set of interface conditions is discussed: the Beavers and Joseph formula for the bottom stress is used. An iterative algorithm to solve the coupled problem is proposed and some numerical results are presented.     

Least-squares integration of one-dimensional codistributions with application to approximate feedback linearization

We study the problem of approximating one-dimensional nonintegrable codistributions by integrable ones and apply the resulting approximations to approximate feedback linearization of single-input systems. The approach derived in this paper allows a linearizable nonlinear system to be found that is close to the given system in a least-squares (L ₂) sense. A linearly controllable single-input affine nonlinear system is feedback linearizable if and only if its characteristic distribution is involutive (hence integrable) or, equivalently, any characteristic one-form (a one-form that annihilates the characteristic distribution) is integrable. We study the problem of finding (least-squares approximate) integrating factors that make a fixed characteristic one-form close to being exact in anL ₂ sense. A given one-form can be decomposed into exact and inexact parts using the Hodge decomposition. We derive an upper bound on the size of the inexact part of a scaled characteristic one-form and show that a least-squares integrating factor provides the minimum value for this upper bound. We also consider higher-order approximate integrating factors that scale a nonintegrable one-form in a way that the scaled form is closer to being integrable inL ₂ together with some derivatives and derive similar bounds for the inexact part. This allows a linearizable nonlinear system that is close to the given system in a least-squares (L ₂) sense together with some derivatives to be found. The Sobolev embedding techniques allow us to obtain an upper bound on the uniform (L _∞) distance between the nonlinear system and its linearizable approximation. This research was supported in part by NSF under Grant PYI ECS-9396296, by AFOSR under Grant AFOSR F49620-94-1-0183, and by a grant from the Hughes Aircraft Company.     

Waves generated by a source below a free surface in water of finite depth

The free-surface flow due to a submerged source in water of finite depth is considered. The fluid is assumed to be inviscid and incompressible. The problem is solved numerically by using a boundary integral equation formulation due to Hocking and Forbes [6]. The numerical results show that there is a train of waves on the free surface in accordance with the results of Mekias and Vanden-Broeck [5]. For small values of the Froude number, the amplitude of the waves is so small that the free surface is essentially flat in the far field. These waveless profiles agree with the calculations of Hocking and Forbes [6].