Specular reflection of thermal neutrons from Gd-containing layers and optimization of antireflective underlayers for polarizing coatings

A detailed analysis of specular neutron reflection from an absorbing medium is given. The experimental studies revealed that oxidation and roughness of the surface are the main factors that determine the neutron reflectivity of Gd-containing layers. It is concluded that the empirical approach used at present does not guarantee optimization of underlayer parameters (composition and thickness) and technological regimes. An algorithm of optimization is proposed, in which account is taken of the substrate potential, the dependence of the underlayer potential on the thermal neutron wavelength, the polarizing coating imperfections that enhance reflection of neutrons with the undesired spin. The antireflective TiZrGd underlayer for CoFe/TiZr supermirrors produced at the magnetron facility DIOGEN (PNPI, Gatchina) is optimized.     

MC^2电缆介质结构及阻抗分析

本文将用数学和实验两种方法证实MC～2电缆不仅能保证特性阻抗变化不超出电缆技术规范。而且能保证在设计频率范围内电缆结构反射损耗最小。     

基于FDR原理的自动灌溉系统设计

利用土壤的介电特性测量土壤含水量是一种快速、简便、可靠的方法。根据频域反射(FDR)法测量原理,电磁波在土壤中的传播频率可用来测试土壤的介电常数,从而得到土壤容积含水率,设计出了一种基于FDR原理的自动灌溉系统,介绍了FDR测量原理,阐述了自动灌溉系统的软硬件构成,土壤水分传感器测得的土壤水分含量信息,经信号处理,输出为0~5V电压信号,经A/D转换送至AT89S52单片机进行判断处理,根据输出数值的大小控制电磁阀的通断时间,从而实现自动灌溉和节水灌溉的目的。试验表明:该系统工作稳定,控制准确,反应灵敏,满足自动灌溉要求。     

便携式时域反射仪硬件系统设计

介绍了用于土壤参数测量的时域反射仪硬件系统的设计与实现方案,并研制出样机TDR-I。该样机使用DSP做主控板,利用阶跃恢复二极管(SRD)产生140ps上升沿的快沿发射脉冲,采用快慢斜波比较法获得等效采样步进精度为8.7ps的取样脉冲。经过实验数据获取验证,该系统测量效果良好。     

全分布式光纤温度传感器研究的进展及趋势

综述了基于光时域反射和光频域反射的分布式温度光纤传感器的原理、技术以及最新的研究进展 ,并在此基础上分析了温度光纤传感器的发展趋势。     

Extraction of S‐parameters from time domain reflectometry and transmission measurements using rational functions

The extraction of the broad band S‐parameter response from transient reflection and transmission measurements is discussed. The proposed method uses the generalized pencil‐of‐function method, recursive deconvolution, and calibration structures to obtain a response using rational functions. A low loss printed circuit board plane and a lossy thin film plane are characterized to capture the two‐port S‐parameters. The results are compared with network analyzer measurements. The effects of the measurement parameters such as the sampling interval, time window, and number of averages are shown. The effect of time jitter on the extracted frequency response is quantified through repeated measurements. © 2003 Wiley Periodicals, Inc. Int J RF and Microwave CAE 13: 74–85, 2003.     

Emissivity Measurements on Metallic Surfaces with Various Degrees of Roughness: A Comparison of Laser Polarimetry and Integrating Sphere Reflectometry

Both integrating sphere reflectometry (ISR) as well as laser polarimetry have their advantages and limitations in their ability to determine the normal spectral emissivity of metallic samples. Laser polarimetry has been used for years to obtain normal spectral emissivity measurements on pulse-heated materials. The method is based on the Fresnel equations, which describe reflection and refraction at an ideally smooth interface between two isotropic media. However, polarimetry is frequently used with surfaces that clearly deviate from this ideal condition. Questions arise with respect to the applicability of the simple Fresnel equations to non-specular surfaces. On the other hand, reflectometry utilizing integrating spheres provides a measurement of the hemispherical spectral reflectance, from which the normal spectral emissivity can be derived. ISR provides data on spectral-normal-hemispherical reflectance and, hence, normal spectral emissivity for a variety of surfaces. However, the resulting errors are minimal when both the sample and the reference have a similar bidirectional reflectance distribution function (BRDF). In an effort to explore the limits of polarimetry in terms of surface roughness, room temperature measurements on the same samples with various degrees of roughness were performed using both ISR and a laser polarimeter. In this paper the two methods are briefly described and the results of the comparison are discussed.     

An optimized distributed fiber Bragg grating sensing system based on optical frequency domain reflectometry

In this paper,the waveforms in time domain and frequency domain of two kinds of optical frequency domain reflectometry (OFDR) sensing systems are compared,which use common fiber Bragg grating (FBG) and...     

The catalytic effect of Fe and Cr on hydrogen and deuterium absorption in Mg thin films

We examined the deuterium absorption and desorption of 55 nm thick Mg films alloyed with Fe and Cr using in-situ neutron reflectometry. The Mg alloy films were covered with bimetallic catalyst layers and could be fully absorbed at room temperature at a pressure of 8 mbar. The NR experiments revealed a deuterium gradient within the Mg alloy layers during absorption and a large deuterium uptake up to a D/M ratio of about 0.45 before the layer started to expand and form magnesium deuteride (MgD₂). Our NR data suggest that the catalytic effect of the Fe–Cr alloy is based on the avoidance of the formation of a blocking MgD₂ layer in the early stages of the absorption process leading to a fast hydrogen absorption kinetics.     

Swelling measurement of polymers in high pressure carbon dioxide using a spectroscopic reflectometer

We developed an in situ thickness monitor using a spectroscopic reflectometer to measure the swelling behaviors of polymer thin films in carbon dioxide up to 30 MPa. Because the change in thickness was measured under high-pressure CO₂, the measurement was performed through a sapphire window with a relatively high refractive index. We found that the window effect on the reflectivity can be successfully eliminated. To confirm the accuracy of the analysis, we measured the swelling behaviors of four polymers (poly(methyl methacrylate) (PMMA), polystyrene (PS), poly(n-butyl methacrylate) (PBMA), and poly(dimethylsiloxane) (PDMS)), and compared the swelling measurements with reported data. The swelling ratios of the polymers were in reasonable agreement with literature data. Notably, anomalous swelling was observed for PBMA and PDMS, although anomalous swelling has been observed in films much thinner than those of our samples, probably due to the low glass transition temperatures and high swelling ratios of PBMA and PDMS.