Polishing of zirconia ceramics by chemically-induced micro-nano bubbles

This study introduces micro-nano bubbles (MNBs) in the process of polishing zirconia ceramics through sodium borohydride hydrolysis to assist in polishing yttria-stabilized zirconia (YSZ). Compared with conventional silica sol, the material removal rate using this MNB-assisted technology is increased by 261.4%, and a lower surface roughness of 1.28 nm can be obtained. Raman, X-ray diffraction, and X-ray photoelectron spectroscopy are used to study the structural changes and phase stability of the YSZ during different polishing periods. The results show that MNBs are the key factor promoting the transformation from the tetragonal phase to the monoclinic phase on the surface of the YSZ during polishing. The H₂O molecules (or OH^? ions) on the surface of the YSZ are driven by the thermal kinetic energy of the micro-jets formed by the collapse of micro-bubbles, and they permeate to occupy more oxygen vacancies in the crystal lattice. Atomic force microscopy and nano-indentation tests show that the micro-protrusions on the surface of the YSZ preferentially undergo phase transformation, and their hardness decreases. This promotes abrasives to preferentially remove rough spots on the surface and achieve more efficient polishing. We believe this work adds valuable insights regarding low-temperature degradation and ultra-precise machining of YSZ ceramic materials.     

An iterative method for suboptimal control of linear time-delayed systems

This article presents a new approach for solving the Optimal Control Problem (OCP) of linear time-delay systems with a quadratic cost functional. The proposed method can also be used for designing optimal control time-delay systems with disturbance. In this study, the Variational Iteration Method (VIM) is employed to convert the original Time-Delay Optimal Control Problem (TDOCP) into a sequence of nonhomogeneous linear two-point boundary value problems (TPBVPs). The optimal control law obtained consists of an accurate linear feedback term and a nonlinear compensation term which is the limit of an adjoint vector sequence. The feedback term is determined by solving Riccati matrix differential equation. By using the finite-step iteration of a nonlinear compensation sequence, we can obtain a suboptimal control law. Finally, Illustrative examples are included to demonstrate the validity and applicability of the technique.     

引入激光回馈的双光束干涉效应的研究

提出了一种引入He-Ne激光回馈的双光束干涉系统,并在理论和实验两方面进行了研究。实验中对系统中的干涉信号及激光器尾光功率变化同时进行探测。发现当干涉仪的主回馈镜移动时,激光器尾光信号是正弦形波形,而干涉仪输出的是以双峰为一个周期的信号,双峰中一峰总是高于另一峰,并且当主回馈镜移动方向改变时,同一周期中两峰出现的顺序也随之改变。对实验现象进行了理论分析,并模拟出干涉信号及激光自身功率的变化曲线。理论分析及模拟结果与实验结果完全吻合。讨论了利用发现的现象进行测量的可行性,所提出的测量方法易于实现。     

Comparative studies on Ar and He closed-cycle MHD power plants combined with fossil fuel

Comparative studies on Ar and He closed-cycle MHD power plants combined with fossil fuel are performed. The sizes of a regenerative heat exchanger and a boiler are expected to be smaller for He than for Ar. The pressure loss of a working gas in a regenerative heat exchanger is reduced for He. The purification subsystem for He is expected to be more compact and economical than that for Ar; but a larger compressor is required for He than for Ar.     

Heat transfer and flow of He II in narrow channels

Heat transfer and fluid flow of He II in a long, narrow channel connected to a bath that supplies a constant supply of heat have been investigated by numerical simulations by using the simplified model of Kitamura et al. [Cryogenics 37 (1) (1997) 1]. Such channels are used to cool compact, stable, low-temperature magnets. The fluid flow is driven by natural convection and the mutual friction between the normal fluid and the superfluid.In this model, the thermomechanical effect and the Goter-Mellink mutual friction balance each other. A consequence of this balance is that the velocity and temperature distributions of He II can be characterized by a dimensionless, dependent parameter equal to the ratio of the fluid speeds of internal convection to the total fluid flow. After a sudden application of heat flux, the internal convection dominates over the total fluid flow until the establishment of steady-state temperature gradients. This predicts that the time required to set up the steady-state total fluid flow is proportional to the total heat capacity in the channel.     

Experimental results of the erosion of molybdenum due to blistering by He+ bombardment

We report some preliminary measurement of the erosion rate of plasma dumps when bombarded with 100 keV He⁺ ions at high power density ( 1 MW/m²). The expected erosion rates, based on measurements of He blistering that were made at lower power density ( 0.3 MW/m²), indicate a potentially serious problem for fusion reactors. Our tests use a reactorlike power density and produce He blisters at a rate that is slower than predicted by 2 to 4 orders of magnitude, depending on the temperature of the molybdenum target.     

Rinsing effect of alkaline electrolyzed water on nickel surfaces

The improvement in the surface cleanliness of electroplated nickel by rinsing in alkaline electrolyzed water (AEW) was determined. When the nickel plated sample was rinsed with the AEW, it was found that the amount of residual sulfate ion on the surface of a sample decreased approximately by half compared to one rinsed only with de-ionized pure water. Because nanosize hydrogen bubbles are present in the AEW, and the zeta-potential has a negative value, we then surmised that the mechanism of rinsing was as follows: The sulfate ions are selectively absorbed on the nanosize colloidal hydrogen bubbles, or substituted for anions absorbed on the hydrogen bubbles. The sulfate ions absorbed on the nickel surface then become detached. The detached sulfate ions are absorbed on the surface of the hydrogen bubbles, and negatively charge the hydrogen bubbles. It can be considered that any detached sulfate ions do not re-adhere due to the electrical repulsion force of the negatively charged nickel surface. Thus the sample is efficiently rinsed.     

塑料旋转成型的特点与研究

介绍了塑料旋转成型的原理和主要特点，对旋转成型制品中易出现的气泡和弯曲，收缩现象，以及冲击强度低的原因进行了分析研究，相应地提出了减少或消除旋转成型制品中的气泡，减少或消除制品收缩和弯曲，以及提高制品冲击强度的主要途径。     

Mass transfer from Taylor bubbles rising in single capillaries

Gas-liquid mass transfer from Taylor bubbles rising in 1, 2 and 3 mm diameter capillaries of circular and square cross-sections was investigated for air-water system. The liquid-phase volumetric mass transfer coefficient k_La was obtained from experimental oxygen absorption dynamics. The experimental k_La values are in good agreement with the model developed by van Baten and Krishna (2004. Chemical Engineering Science 59, 2535-2545), with the additional assumption that the dominant mass transfer contribution is to the film surrounding the bubble.