Effect of sintering temperature on solidification and migration of non-volatile and volatile heavy metals in glass-ceramic

Using tailings as material to prepare glass-ceramic is an excellent way to achieve the resource utilization of solid waste. However, at present, researches on the solidification and migration of heavy metals are limited. Therefore, in this study, ten groups of samples were prepared by controlling sintering temperatures. The solidification, migration, and leaching behavior of non-volatile and volatile heavy metals were studied. The research showed that, with the increase of temperature, the properties of the samples were improved. Fe participated in the phase transformation and evolved into insoluble iron pyroxenes solid solution, while Pb was homogeneously distributed in the glass matrix of glass-ceramics. The leaching concentrations of Fe and Pb in the glass-ceramics were 0.055 mg/L ～0.087 mg/L and 0.074 mg/L ～0.140 mg/L, which were far below the threshold value. The results showed that heavy metals can be effectively solidified in glass-ceramics and have good environmental benefits.     

A grounded theory examination of project managers' accountability

26 interviews were conducted with a snowball sample of project managers to explore how project managers were influenced by accountability arrangements and how they responded to accountability demands. Using a grounded theory approach to code the interview data, this study revealed that project managers develop new skills to respond to accountability demands. These effects are facilitated by the interaction of resource-based mechanisms and reflexivity that interact with the contextual factors of the project. The study broadens the understanding of accountability in project management and suggests a model for further empirical examination.     

Effect of microstructure on the fatigue crack growth behaviour of a near-α Ti alloy

Fatigue crack growth behaviour of Ti–6Al–2Zr–1.5Mo–1.5V (VT-20 a near-α Ti alloy) was studied in lamellar, bimodal and acicular microstructural conditions. Fatigue crack growth tests at both increasing and decreasing stress intensity factor range values were performed at ambient temperature and a loading ratio of 0.3 using compact tension samples. Lamellar and acicular microstructures showed lower fatigue crack growth rates as compared to the bimodal microstructure due to the tortuous nature of cracks in the former and the cleavage of primary α in the latter. The threshold stress intensity factor range was highest for acicular microstructure.     

Evolution and structure of drying material bridges of pharmaceutical excipients: studies on a microscope slide

An experimental procedure was developed to study directly the process by which liquid bridges between small particles in a granule form and solidify. The evolution of saturated solutions of such pharmaceutical excipients as lactose and mannitol in a liquid bridge was studied on a system situated on a microscope slide. Solidification and crystallization kinetics and phase composition during and immediately following bridge formation were observed directly. It was shown that bridges on the microscope slide and in the granule behave very much the same regardless of the different length and diffusion-scales of the two systems.We found that solid bridge formation takes place in several consecutive but distinct steps. In the case of lactose, considerable shrinkage of the initial liquid bridge takes place prior to the onset of crystallization. Further bridge solidification at ambient conditions occurs via simultaneous crystallization and vitrification within minutes. As a result, a “solid” bridge usually contains both a crystalline and a non-crystalline phase, the crystalline phase being predominately α-lactose monohydrate. Most of the non-crystalline phase eventually converts to crystalline β-lactose but the process may take many hours or even days. Results for this process are compared for samples obtained from different manufacturers of commercially available lactose. In the case of mannitol, different polymorphic forms crystallize as the drying/crystallization process progresses. A formed “solid” bridge usually contains several polymorphs of mannitol. The relevance of the behavior of the two model systems (pure lactose and pure mannitol) to a real granulation and tabletting process is discussed.     

石油沥青60℃动力粘度测定影响因素的探讨

粘度是表征沥青稠度的一个重要指标。通过论述石油沥青粘度测定法(真空毛细管法)中毛细管的选择、温度、真空度、取样量等对试验结果的影响及试验过程中的其它注意事项,表明了在测定石油沥青的60℃动力粘度时,必须严格按照试验方法的要求进行测定,以保证试验结果的准确性。     

夯扩挤密水泥土桩用于高层建筑地基处理的尝试

水泥土桩已普遍用于多层住宅的地基处理，根据水泥土和夯扩挤密施工法的特点，在对夯扩挤密水泥土桩用于高层建筑地基处理进行研究、阐明其经济合理且安全可行的基础上，在高层住宅工程中进行了尝试，已取得令人满意的效果。     

A simple mathematical analysis on the effect of sand in Cr(VI) reduction using zero valent iron

A simple mathematical model was proposed to analyze the enhancement of Cr(VI) reduction when sand materials are added to the zero valent iron (ZVI). Natural decay of Cr(VI) in a control experiment was analyzed by using a zero-order decay reaction. Adsorption kinetics of Cr(VI) to sand was modeled as a first-order reversible process, and the reduction rate by ZVI was treated as a first-order reaction. Natural decay of Cr(VI) was also included in other experiments, i.e., the adsorption to sand, the reduction by ZVI, and both adsorption and reduction when sand and ZVI are present together. The model parameters were estimated by fitting the solution of each model to the corresponding experimental data. To observe the effect of sand addition to ZVI, both adsorption and reduction rate models were considered simultaneously including the natural decay. The solution of the combined model was fitted to the experimental data to determine the first-order adsorption and reduction rate constants when sand as well as ZVI is present. The first-order reduction rate constant in the presence of sand was about 35 times higher than that with ZVI only.     

异质谷间转移电子器件的计算机模拟

使用弛豫时间近似求出了描述两能谷间电子交换的方程。在此基础上建立了双能谷电子的连续性方程和油松方程。对具体的ＧａＡｓ／ＡｌｘＧａ１－ｘＡｓ异质谷间转移电子器件结构求解了这些方程组，得到了直流工作时器件内的电场分布、双能谷中载流子的布居以及两个能谷的电流分布。这些结果正好和常规Ｇｕｎｎ器件相反，说明了两种器件的不同工作机理。最后通过对低Ａｌ组份势垒结构的计算说明了Ｘ谷电子注入对器件工作的重要作用。     

消费品说明中警示信息有效性的工效学研究(Ⅰ)——警示信息对消费者危险感受与商品危险性之间关系的影响

该研究采用问卷法，通过对３０种消费品的调查，分析了消费者对消费品说明中警示信息的阅读倾向性，消费者的危险感受、消费者安全使用商品的自信度、遵守警示信息的可能性、主观危险估计和客观危险性这几项因素之间的关系。结果表明：消费者的危险感受与阅读警示信息的倾向性、遵守警告的要求之间存在高度的一致性；且与自信度呈负相关，所以可以通过研究消费者的危险感受来研究警示信息的有效性；消费者的危险感受、主观危险估计常与商品的客观危险性不一致，所以必须采取一些措施来矫正消费者的危险感受，以确保警示信息发挥应有的安全保障作用     

灌溉与环境浅议

灌溉为人类带来了巨大的社会效益,也对环境产生了一定的不利影响,但目前对于灌溉的环境问题还处于起始阶段。文中从生态、土壤、水质、人群健康、水文地质、景观地貌等等方面分析了灌溉工程对环境的影响,试图引起人们在今后的多目标水资源开发中重视研究灌溉与环境如何达到协调平衡,为人类创造更好的生存环境。