A practical Equivalent Electrical Circuit model for Proton Exchange Membrane Fuel Cell (PEMFC) systems

An alternative Equivalent Electrical Circuit for Proton Exchange Membrane Fuel Cells is modelled in this study. Both I–V characteristics and H₂ consumptions corresponding to generated power under load and no-load conditions are investigated. For this purpose, H₂ consumptions and I–V characteristics of three different sized PEMFCs are tested. There is a very good harmony between the model results and measured values (relative error %0.7, %6.4 and %2.5 for FC-A, FC-B and FC-C respectively). In the proposed model current passes only on parallel resistance and not on serial resistance at no-load condition. Thus, a FC with higher parallel resistance should be preferred. Another key output of this study is that based on the proposed model, performance comparison of FCs can be performed with the parameters defined in this work. Proposals made in this study can easily be used for performance analysis of FCs under for both steady state and transient analysis.     

High‐intensity sweeteners in espresso coffee: ideal and equivalent sweetness and time–intensity analysis

The efficient substitution of sucrose by a sweetener in beverages requires the application of some sensory techniques. First, one must determine the concentrations of the sweeteners under study, equivalent in sweetness to the ideal sucrose concentration. In addition, it is fundamental to determine which is most similar to sucrose. The objectives of this study were to determine the ideal sweetness for espresso coffee and the equivalent concentrations in sweetness of different sweeteners, as well as characterise the time–intensity profile of each sweetener in relation to sweetness. The sweeteners evaluated were sucralose, aspartame, neotame, a cyclamate/saccharin mixture (2:1) and stevia. The sucrose concentration considered ideal by consumers was 12.5% (w/v), and the equivalent concentrations of the sweeteners were 0.0159% for sucralose, 0.0549% for aspartame, 0.0016% for neotame, 0.0359% for the cyclamate/saccharin mixture and 0.0998% for stevia. The time–intensity analysis indicated that possibly the sweeteners neotame, aspartame and sucralose would be the best substitutes for sucrose.     

Stereo matching cost computation based on nonsubsampled contourlet transform

A new matching cost computation method based on nonsubsampled contourlet transform (NSCT) for stereo image matching is proposed in this paper. Firstly, stereo image is decomposed into high frequency sub-band images at different scales and along different directions by NSCT. Secondly, by utilizing coefficients in high frequency domain and grayscales in RGB color space, the computation model of weighted matching cost between two pixels is designed based on the gestalt laws. Lastly, two types of experiments are carried out with standard stereopairs in the Middlebury benchmark. One of the experiments is to confirm optimum values of NSCT scale and direction parameters, and the other is to compare proposed matching cost with nine known matching costs. Experimental results show that the optimum values of scale and direction parameters are respectively 2 and 3, and the matching accuracy of the proposed matching cost is twice higher than that of traditional NCC cost.     

“Size effect” in the fatigue behavior of Friction Stir Welded plates

Comparative fatigue tests were carried out on Friction Stir Welded specimens of a 2195-T8 aluminum–lithium alloy that differed significantly in width. The width of the larger specimens was over thirteen times greater than that of the small specimens. Fatigue results showed a clear “size effect”, i.e. fatigue life of large specimens was about 40% of the corresponding value of small specimens. The Equivalent Initial Flaw Size methodology was adopted to correlate the two sets of results. Fatigue crack initiation life was disregarded with respect to crack propagation life, and fatigue life was evaluated only as propagation of a small pre-existing defect. Following this methodology, test results of small specimens were used to evaluate the initial equivalent flaw contained in each specimen. It was assumed that this data followed a normal distribution. The equivalent initial flaw in larger specimens was evaluated by simple geometrical considerations. A very good assessment of mean fatigue life and scatter in the fatigue results of large specimens was obtained by simulating the propagation of these defects. Calculations were carried out by taking also welding residual stresses into account, but the results demonstrated that this effect was not significant.     

切尔诺贝利事故释放的~(131)I所致牧草、奶类的污染水平及其变化规律

本文报道了苏联切尔诺贝利核电站事故释放的~(131)I对乌鲁木齐地区牧草、奶类的污染水平及动态变化规律。经估算,~(131)I经奶类所致成人(1.2μSv)和婴儿(120μSv)甲状腺最大待积剂量当量远低于我国放射卫生防护基本标准规定的年剂量限值,因此,对居民健康不会产生影响。     

一种新的加权最小二乘测距定位方法

三站二维定位问题是最小定位问题，一般只利用几何关系就能获得定位估计，但由于未利用距离测量的统计信息，定位精度较差。该文先将点到点的距离测量转化为点到线的距离估计，再在此基础上推导出一种新的加权几休定位方法，其中加权的确定利用了距离测量的统计信息。仿真实验表明，在测距误差较小时新方法具有更高的定位精度。     

Solving the trade-off between fairness and throughput: Token bucket and leaky bucket-based weighted fair queueing schedulers

In this article, we present two efficient weighted fair queueing (WFQ) scheduling algorithms leaned on the well-known token bucket and leaky bucket shaping/policing algorithms. The performance of the presented algorithms is compared to those of the state-of-the-art WFQ approximations such as weighted round robin (WRR) and the recently proposed bin sort fair queueing (BSFQ). Our simulation results show that the proposed algorithms provide a better fairness at a lower implementation complexity while simultaneously achieving a comparable network utilization.     

国际放射防护委员会的剂量系数的可靠性

在评价公众成员摄入放射性核素的辐射危害时，需估算每单位摄入量所致的剂量。摄入放射性素后器官或民受到的剂量是受到的剂量是通过生物学模型和剂量学模型来确定的，因此剂量也必须根据模型来确定。文中初步探讨了国际放射防护委员会给出的剂量系数的可靠性问题。文中首先说明了估算剂量系数的概念和方法，然后分析了剂量系数估算中，采用胃肠道模型，呼吸道模型，系统生物动力学模型和剂量学模型所遇到的不确定度的各种主要来源。     

用Calyculin A诱导的染色体凝聚研究辐射的剂量效应关系

采用不同剂量（0，0.25,0.5,1.0,2.0,3.0Gy)的60Coγ射线照射离体人血，于照后46h加入CalyculinA，观察其诱导的染色体凝聚，并与常规染色体畸变法进行比较，结果表明，Calyculin A法PCC与常规秋水仙素阻滞法及融合法PCC相比可获得更高的分裂指数，Calyculin A法PCC的断片数与剂量之间呈良好的线性关系。