Hydrophobic Cross-Linked Poly(dimethylsiloxane)-Based Sorbents for Oil Spill Applications

With the increase of industrialization and urbanization, humankind faces massive oil-based pollution due to tanker accidents, human error, and natural disasters. For this, hydrophobic sorbents are fabricated and their applications for the removal of oil from polluted water sources are investigated. These hydrophobic sorbents are prepared by the condensation reaction of poly(dimethylsiloxane) and tris[3-(trimethoxysilyl)propyl]isocyanurate cross-linker via bulk polymerization. The obtained sorbents exhibit high oil sorption capacity, fast absorption–desorption kinetics, and great reusability. Moreover, they can selectively absorb oil from the water surface, thus making them practical for water clean-up applications.     

TiO2/MXene-Assisted LDI-MS for Urine Metabolic Profiling in Urinary Disease

Cancer remains an intractable medical problem. Rapid diagnosis and identification of cancer are critical to differentiate it from nonmalignant diseases. High-throughput biofluid metabolic analysis has potential for cancer diagnosis. Nevertheless, the present metabolite analysis method does not meet the demand for high-throughput screening of diseases. Herein, a high-throughput, cost-effective, and noninvasive urine metabolic profiling method based on TiO₂/MXene-assisted laser desorption/ionization mass spectrometry (LDI-MS) is presented for the efficient screening of bladder cancer (BC) and nonmalignant urinary disease. Combined with machine learning, TiO₂/MXene-assisted LDI-MS enables high diagnostic accuracy (96.8%) for the classification of patient groups (including 47 BC and 46 ureteral calculus (UC) patients) from healthy controls (113 cases). In addition, BC patients can also be identified from noncancerous UC individuals with an accuracy of 88.3% in the independent test cohort. Furthermore, metabolite variations between BC and UC individuals are investigated based on relative quantification, and related pathways are also discussed. These results suggest that this method, based on urine metabolic patterns, provides a potential tool for rapidly distinguishing urinary diseases and it may pave the way for precision medicine.     

Amine-containing olefin copolymer with CO2-switchable oil absorption and desorption

Global decrease in crude oil resources and frequent crude oil leaks cause the energy crisis and ecological pollution. The absorption and release of leaked crude oil through absorption materials are a necessary process for environmental protection and recycling. In this article, a CO₂-responsive olefin copolymer was obtained by copolymerization of styrene and an amine-containing olefin monomer. The structure of resultant copolymer was characterized by FTIR; thermal properties and CO₂-responsive morphology changes were determined by DSC/TGA and SEM, respectively. Copolymers had certain absorption capacity for toluene with absorption rate up to 180.0%. The absorbed toluene could be released upon CO₂ stimulation with desorption rate up to 84.6%. The CO₂-responsive copolymer could be regenerated through a simple heating process and showed stable absorption–desorption performance even after being recycled for 4 times. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47439.     

芳烃联合装置节能降耗方法探讨

结合芳烃联合装置的发展形势，通过对国内某4套典型芳烃联合装置运行能耗的构成进行分析，确定该类装置的主要能耗在于燃料、电和蒸汽的消耗。总结了目前国内外常用的芳烃联合装置节能降耗方法，利用实际经验和调研结果，从采用新型吸附剂、采用单台吸附塔新工艺、采用轻质解吸剂替代对二乙苯（PDEB）、优化吸附塔运行参数、加热炉节能优化和选用高效节能设备等角度探讨芳烃联合装置的节能降耗方法。芳烃联合装置节能降耗应该由设计单位和生产单位紧密结合，在设计阶段就应充分考虑生产过程面临的问题，充分优化工艺路线、方案和设备设计，尽可能降低装置的能耗。同样，装置运行过程中，生产部门应标准化、精细化管理，优化日常操作，从而进一步降低装置的操作能耗。     

锑酸消除含氚废空气中的氚

用锑酸作消气材料 ,压制成消氚电极 ,在适当外加条件下 ,考察了锑酸作消氚材料直接将含氚废空气中的氚除去的可能性。对消氚过程中料气中氚的浓度及水分对消氚结果的影响进行了考察 ,给出了消气片中氚的物料平衡。结果表明 :在 3 2L含氚空气中 ,用锑酸制成的消氚材料 ,在 2 0 0min左右可将原料气氛中 80 %以上的氚去除     

可再生烟气脱硫吸收剂及工艺研究

开发了一种新型可再生烟气脱硫吸收剂、解吸助剂及工艺。合成的吸收剂LDS对烟气中的SOx 具有良好的吸收和解吸能力 ,烟气中SOx 含量在 10 0 0～ 5 0 0 0 0 μg L范围内 ,脱硫率均可达 95 %以上 ;解吸助剂LDS A能有效提高主吸收剂LDS的解吸能力 ,提高单位吸收剂的吸收效率。试验表明 :该工艺脱硫率高 ,烟气净化效果好 ,与传统的烟气脱硫工艺相比 ,SOx 可回收利用 ,不产生二次污染     

被动式氚取样器性能的实验研究

介绍了核设施工作场所和环境空气中氚化水蒸气HTO的监测，被动式氚取样器在国外已经得到非常广泛的应用，所研制的被动式氚取样器，特别适用于7－30d的长期取样，给出该取样周期内空气中HTO浓度的平均值。     

Molecular simulation of temperature-programmed desorption

We use accelerated molecular dynamics to probe the thermal desorption of n-alkanes from the Au(1 1 1) and C(0 0 0 1) surfaces. Studying an alkane series ranging from CH₄ to C₁₆H₃₄, we find that the desorption prefactor increases with increasing chain length for the short chains until a certain chain length is reached when it becomes essentially constant and independent of chain length. We can understand the dependence of the preexponential factor on alkane chain length in terms of conformational changes within the alkane molecules. For the shorter molecules, the desorption temperatures probed in experimental temperature-programmed desorption studies lie below those for which torsional motion is activated. Thus, the short alkanes can be treated as rigid rods, and the loss in translational and rotational entropy upon adsorption leads to a preexponential factor that increases with increasing chain length. As the alkane chain length increases, the binding energy and the experimental desorption temperatures also increase. Thus, torsional motion is activated to an extent that increases with increasing chain length. This torsional activation increases the entropy of adsorption and counteracts the entropy decrease due to a loss of translation and rotation. This leads to a virtually constant prefactor for sufficiently long chains. Our findings are consistent with experimental data for the thermal desorption of alkanes from the Au(1 1 1), Pt(1 1 1), MgO(1 0 0) and C(0 0 0 1) surfaces.     

"信号调制法"研究电子诱导脱附--基本原理及误差分析

电子诱导脱附是近年来在真空科学与表面科学领域内的热门研究课题。它不仅作为研究和探讨原子激发过程以及电子能量传输机制的有效手段,而且已经逐渐成为获取表面和界面结构、状态等信息的有效方法。“信号调制法”是利用脉冲电流能量调制的电子探束取代传统的直流电子探束,并通过测量电子诱导脱附产物引起的压强变化量,来研究电子诱导脱附的新方法。本文系统地介绍了该方法的基本原理,并从理论上对该方法带来的测量误差进行了分析。     

Further evidence of responsibility of impurities in MgO for variability in its basicity and catalytic performance in oxidative coupling of methane

Further evidence was delivered that certain impurities, which could be contained in MgO samples, might be responsible for observed variability in MgO basicity and catalytic performance in oxidative coupling of methane. The surface basicity/base strength distribution of a series of MgO samples containing or not containing Ca and Na impurities was determined by a temperature-programmed desorption of CO₂. It was revealed that samples containing Ca and Na impurities have much more medium, strong and very strong basic sites. The surface basicity of MgO samples containing added alkali or alkaline earth compounds or water was characterized by a test reaction of transformation of 2-butanol. It was confirmed that the introduction of these compounds to a pure MgO enhanced both its basicity and activity in oxidative coupling of methane.