基于物联网的智慧林业可持续发展策略研究

随着我国科技的不断进步,在“互联网+”大数据的背景下,林业的智慧化发展是必经之路。虽然我国智慧林业的发展已经取得了一定的突破,但是仍然存在着许多问题。基于此,文章在物联网技术的基础上,对智慧林业的可持续发展策略进行探讨。     

The measurement of the diffusion coefficient and the sorption isotherm of water in paint films

An experimental technique together with a numerical model is proposed with which the diffusion coefficient and the sorption isotherm of water in paint can be measured. Inside a closed vessel, paint films are on stainless-steel plates. Water is present as water vapour in the air and in the paint. After blowing dry or wet air through the vessel for some time, the situation moves to a new equilibrium. The relative humidity of the air inside the vessel is measured as a function of time. From fitting the theoretical/numerical model against the experimental values, follow the diffusion coefficient and the sorption isotherm of water in the paint. The results show large scattering. When the independently measured sorption isotherm is used as an input parameter in the model, the fitting procedure gives much smaller scattering for the diffusion coefficient.     

Epoxy paint failure in B-52 fuel tanks: Part II. Influence of DIEGME concentration in the fuel on the failure process

A model has been proposed to explain the failure of the original BMS10-39 epoxy paint on upper vertical surfaces in B-52 fuel tanks. The model involves interaction of the paint with DIEGME, a fuel system ice inhibitor (FSII) in jet fuel, that is distilled from the liquid fuel. In this communication, distillation experiments used to support the model are refined to better match the mass transfer of vapor from fuel in a B-52 fuel tank at close to room temperature. The interaction of these lower temperature distillates with the paint affirms the earlier model. On the basis of these experiments it is proposed that paint failure may be controlled or eliminated by reducing the level of DIEGME in the fuel. Proposed changes in military jet fuel composition are detailed.     

A Generic Pigment Model for Digital Painting

We propose a generic pigment model suitable for digital painting in a wide range of genres including traditional Chinese painting and water-based painting. The model embodies a simulation of the pigment-water solution and its interaction with the brush and the paper at the level of pigment particles; such a level of detail is needed for achieving highly intricate effects by the artist. The simulation covers pigment diffusion and sorption processes at the paper surface, and aspects of pigment particle deposition on the paper. We follow rules and formulations from quantitative studies of adsorption and diffusion processes in surface chemistry and the textile industry. The result is a pigment model that spans a continuum from the very wet to the very dry brush stroke effects. We also propose a new pigment mixing method based on machine learning techniques to emulate pigment mixing in real life as well as to support the creation of new artificial pigments. To experiment with the proposed model, we embedded the model in a sophisticated digital brush system. The combined system exhibits interactive speed on a modest PC platform. http://www.cs.hku.hk/~songhua/pigment provides supplementary materials for this paper.     

复吹转炉“留渣 双渣”脱磷工艺试验

摘要：在国内某转炉钢厂采用“留渣 双渣”工艺技术进行脱磷工艺试验。结果表明：随着转炉前期脱磷率不断升高,终点脱磷率不断提高。铁水硅含量对前期脱磷率的影响最大。根据铁水成分,在冶炼前期适当降低供氧强度、降低气固氧比、加入适量石灰及烧结矿,均有利于前期脱磷率的提高。在一倒时每吨钢液加入4~8kg石灰,不影响出钢温度,可提高一倒-终点阶段脱磷率,同时可提高终点脱磷率。从终点的控制效果可知,终点炉渣碱度应保持不小于3.0,炉渣中FeO质量分数在16%~20%,并适当降低终点出钢温度在1610~1630℃,有利于终点脱磷率的提高。通过加强熔池搅拌,促进钢渣反应趋于平衡,有利于终点磷分配比提高,从而可进一步提高终点脱磷率。     

单塔汽提水罐开裂原因分析及解决对策

单塔汽提装置原料水罐产生腐蚀裂纹的原因分析判断为低温HCN-H2S-H2O环境下的硫化物应力腐蚀开裂,根据腐蚀成因制定了合理的焊接补焊工艺;涂料防护施工的重点在于表面处理,喷砂后用面粘效果理想且节约施工时间,可延长涂层寿命。     

彩板涂料固化温度曲线的测定

在卷材有机涂层钢板生产中，涂料的固化温度是影响产品质量的重要因素。使用BYKOTRACK和GRADIENT－OVEN测出不同基板、不同涂料的固化温度曲线，并控制固化过程温度参数，可使每次生产都获得最佳固化温度，此而大大减少废、次品，经济效益十分显著。     

磷复肥喷浆造粒“三内”技术研究与开发(一)

介绍磷复肥喷浆造粒“三内”技术 ,该技术集喷浆造粒、分级、返料、破碎为一体在转筒内完成全过程 ,实现机头喷浆机尾出产品 ,粉体在筒内闭式循环造粒新技术     

Effects Of Ozone On The Production Of Biodegradable Dissolved Organic Carbon (BDOC) During Water Treatment

This article deals with the oxidation effect of ozone on the increasing fraction of biodegradable organic matter with the “ozotest” method, a laboratory technique which simulates the effect of ozonation and allows a complete oxidation assessment. Ozone treatment was performed on river water samples and sand filter effluent samples. Ozone consumption, reduction of UV absorbance and BDOC formation were monitored with applied ozone doses from 0 to 10 mg/L and with contact times from 0 to 60 min. The BDOC formation was optimum at an applied ozone dose of 0.25-0.5 mg O₃ per mg DOC (contact time = 5 min) corresponding to apparition of traces of residual ozone and maximum UV reduction. Maximum ozone consumption, UV reduction and BDOC formation occurred simultaneously during the first two minutes of treatment. Concerning BDOC formation, applied ozone dose showed a greater effectiveness than contact time. For the same quantity of consumed ozone, a short contact time associated with a high ozone dose was preferable to a long contact time and a low ozone dose.