纳米白炭黑的表面改性及其在氯丁橡胶中的应用

研究纳米白炭黑经硅烷偶联剂(Si-75)湿法改性后对氯丁橡胶抗疲劳性能的影响，并对改性剂的用量、改性工艺条件进行了优化。实验结果表明：适当改性后的纳米白炭黑可显著提高氯丁橡胶的抗撕裂和抗疲劳性能。     

Sub-ambient cold-start emissions reduction using SwRI® PO x catalyst technology

This paper describes the application of SwRI’s cold-start PO _x catalyst technology to reduce cold-start hydrocarbon emissions from a US Tier 2 vehicle at −7 °C. A reduction in −7 °C (20 °F) cold-start hydrocarbons will help US Tier 2 vehicles meet the proposed EPA NMOG standards. Improvements in cold temperature hydrocarbon emissions would also be beneficial in many parts of Europe during the winter months. In this work, a total hydrocarbon reduction of 19% was realized at 24 °C, in line with previous results, but only up to 3% at −7 °C. Insufficient oxygen in the engine-out exhaust gas at −7 °C was determined to be the reason why the PO _x catalyst failed to significantly reduce HC emissions. Addition of supplemental oxygen to the exhaust during the cold-start, to simulate an adjustment in the engine calibration to less rich operation, resulted in a total hydrocarbon reduction of 18% with the PO _x catalysts in place, but no benefit when the PO _x catalysts were removed. Hence, the PO _x catalyst approach can be used to good effect, even under sub-ambient cold-start conditions.     

球墨铸铁Dg75阀体消失模近净型铸造

介绍消失模工艺生产Dg75闸阀阀体铸件的铸造工艺，生产过程中铸件重要装配尺寸精度的保证，铸件表面粗糙度、铸件表面碳夹杂缺陷及表面皱皮现象控制等试验情况。通过模具结构设计、成型工艺及参数的调整、浇注工艺的调整、陶瓷成型浇道的应用等措施，使铸件表面质量及尺寸精度符合客户验收标准。同时使铸件表面因轻微缺陷的返修率由试验初期的90％下降到10％以内，产品合格率达到99％。     

净化对非晶形成能力和非晶热稳定性的影响SCIEI

采用玻璃熔体净化法和电磁悬浮循环过热法消除Ni_(75),B_(17)Si_R合金液内的异质核心,研究了净化对该合金液非晶形成能力和所形成的非晶合金热稳定性的影响。采用净化和忽冷相结合的工艺制备出了20×10×0.5mm的Ni_(75)B_(17)Si_8非晶试样,试样的厚度较净化前提高了4倍。     

退火变脆Fe75Si10B15金属玻璃的脆韧性转变

研究了机械研磨对退火变脆Fe_(75)Si_(10)B_(15)金属玻璃的弛豫过程,晶化行为及脆韧性转变的影响。发现退火变脆的Fe_(75)Si_(10)B_(15)金属玻璃,经不同时间机械研磨,Curie温度T_C逐渐回落,总的弛像焓ΔH_?逐渐回升。在DSC曲线上观察到明显的玻璃转变温度T_(g_1)和一个附加的宽放热峰T_(x_1),随着研磨时间的增加,T_(x_1),T_(x_1),T_C同步降低,与T_(x_1)对应的放热面积ΔH_(x_1)逐渐增大,并在片状粒子表面形成切变带以及与其对应的剪切带,玻璃在退火过程中失掉的韧性逐渐得到恢复。     

新型数字温度传感器ADT75的原理及应用

详细介绍ADI公司生产的新型数字温度传感器ADT75的功能、结构以及工作原理,并给出其在温度控制系统中的应用实例。通过实验可知,ADT75具有测温范围宽、测温准确、灵敏度高等优点。ADT75采用I^2C总线接口,连接电路简单,具有广阔的应用空间。     

基于单片机SPMC75的模拟全自动洗衣机的设计

以凌阳16bit单片机SPMC75F2413A为主控制器,采用模糊推理的方法针对衣物的布量、脏净信息进行处理,从而建立了模糊控制规则集,最终实现了对家用洗衣机的智能模糊控制的模拟系统.     

基于SHT75的多功能数显温湿度计设计

由数字式湿度温度传感器SHT75的原理,设计了一种多功能数字显示温湿度计。该温湿度计具有精密度高、性能稳定、由CRC校验据保证了数据的可靠性;在实时温度和湿度数字显示的同时,能够计算对应露点;且具备电源选择功能。该设计的特点是：USB接口等实现多种数据输出,为温湿度计与其它功能模块结合使用提供了条件,也为温度和湿度的自动控制提供了方便。该温湿度计还能够进一步开发温度和湿度远程自动控制系统。     

On the decoding of binary cyclic codes with the Newton identities

We revisit in this paper the concept of decoding binary cyclic codes with Gröbner bases. These ideas were first introduced by Cooper, then Chen, Reed, Helleseth and Truong, and eventually by Orsini and Sala. We discuss here another way of putting the decoding problem into equations: the Newton identities. Although these identities have been extensively used for decoding, the work was done manually, to provide formulas for the coefficients of the locator polynomial. This was achieved by Reed, Chen, Truong and others in a long series of papers, for decoding quadratic residue codes, on a case-by-case basis. It is tempting to automate these computations, using elimination theory and Gröbner bases.Thus, we study in this paper the properties of the system defined by the Newton identities, for decoding binary cyclic codes. This is done in two steps, first we prove some facts about the variety associated with this system, then we prove that the ideal itself contains relevant equations for decoding, which lead to formulas.Then we consider the so-called online Gröbner basis decoding, where the work of computing a Gröbner basis is done for each received word. It is much more efficient for practical purposes than preprocessing and substituting into the formulas. Finally, we conclude with some computational results, for codes of interesting length (about one hundred).     

用于通信模块的短消息类的设计与实现

介绍短消息发送实体、短消息协议数据单元与AT指令集.在VC6.0基础上,编写通信模块短消息类,通过串口发送AT指令与通信模块通信,实现短消息的设置、收发等功能,出口参数具有错误和状态提示,方便用户进行再开发.该短消息类已在SIEMENS公司MC75模块上调试成功.