Mapping nonnative plants using hyperspectral imagery

Nonnative plant species are causing enormous ecological and environmental impacts from local to global scale. Remote sensing images have had mixed success in providing spatial information on land cover characteristics to land managers that increase effective management of invasions into native habitats. However, there has been limited evaluation of the use of hyperspectral data and processing techniques for mapping specific invasive species based on their spectral characteristics. This research evaluated three different methods of processing hyperspectral imagery: minimum noise fraction (MNF), continuum removal, and band ratio indices for mapping iceplant (Carpobrotus edulis) and jubata grass (Cortaderia jubata) in California's coastal habitat. Validation with field sampling data showed high mapping accuracies for all methods for identifying presence or absence of iceplant (97%), with the MNF procedure producing the highest accuracy (55%) when the classes were divided into four different densities of iceplant.     

Invasive species detection in Hawaiian rainforests using airborne imaging spectroscopy and LiDAR

Remote sensing of invasive species is a critical component of conservation and management efforts, but reliable methods for the detection of invaders have not been widely established. In Hawaiian forests, we recently found that invasive trees often have hyperspectral signatures unique from that of native trees, but mapping based on spectral reflectance properties alone is confounded by issues of canopy senescence and mortality, intra- and inter-canopy gaps and shadowing, and terrain variability. We deployed a new hybrid airborne system combining the Carnegie Airborne Observatory (CAO) small-footprint light detection and ranging (LiDAR) system with the Airborne Visible and Infrared Imaging Spectrometer (AVIRIS) to map the three-dimensional spectral and structural properties of Hawaiian forests. The CAO-AVIRIS systems and data were fully integrated using in-flight and post-flight fusion techniques, facilitating an analysis of forest canopy properties to determine the presence and abundance of three highly invasive tree species in Hawaiian rainforests.

The LiDAR sub-system was used to model forest canopy height and top-of-canopy surfaces; these structural data allowed for automated masking of forest gaps, intra- and inter-canopy shadows, and minimum vegetation height in the AVIRIS images. The remaining sunlit canopy spectra were analyzed using spatially-constrained spectral mixture analysis. The results of the combined LiDAR-spectroscopic analysis highlighted the location and fractional abundance of each invasive tree species throughout the rainforest sites. Field validation studies demonstrated < 6.8% and < 18.6% error rates in the detection of invasive tree species at  7 m² and  2 m² minimum canopy cover thresholds. Our results show that full integration of imaging spectroscopy and LiDAR measurements provides enormous flexibility and analytical potential for studies of terrestrial ecosystems and the species contained within them.     

Mapping vegetation in Yellowstone National Park using spectral feature analysis of AVIRIS data

Knowledge of the distribution of vegetation on the landscape can be used to investigate ecosystem functioning. The sizes and movements of animal populations can be linked to resources provided by different plant species. This paper demonstrates the application of imaging spectroscopy to the study of vegetation in Yellowstone National Park (Yellowstone) using spectral feature analysis of data from the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS). AVIRIS data, acquired on August 7, 1996, were calibrated to surface reflectance using a radiative transfer model and field reflectance measurements of a ground calibration site. A spectral library of canopy reflectance signatures was created by averaging pixels of the calibrated AVIRIS data over areas of known forest and nonforest vegetation cover types in Yellowstone. Using continuum removal and least squares fitting algorithms in the US Geological Survey's Tetracorder expert system, the distributions of these vegetation types were determined by comparing the absorption features of vegetation in the spectral library with the spectra from the AVIRIS data. The 0.68 μm chlorophyll absorption feature and leaf water absorption features, centered near 0.98 and 1.20 μm, were analyzed. Nonforest cover types of sagebrush, grasslands, willows, sedges, and other wetland vegetation were mapped in the Lamar Valley of Yellowstone. Conifer cover types of lodgepole pine, whitebark pine, Douglas fir, and mixed Engelmann spruce/subalpine fir forests were spectrally discriminated and their distributions mapped in the AVIRIS images. In the Mount Washburn area of Yellowstone, a comparison of the AVIRIS map of forest cover types to a map derived from air photos resulted in an overall agreement of 74.1% (kappa statistic=0.62).     

Characterizing patterns of plant distribution in a southern California salt marsh using remotely sensed topographic and hyperspectral data and local tidal fluctuations

We used LiDAR topographic data, AVIRIS hyperspectral data, and locally measured tidal fluctuations to characterize patterns of plant distribution within a southern California salt marsh (Carpinteria Salt Marsh (CSM)). LiDAR data required ground truthing and correction before they were suitable for use. Twenty to forty percent of the uncertainty associated with LiDAR was due to variance in the elevation of the target surface, the balance was attributed to error inherent in the LiDAR system. The incidence of LiDAR penetration of plant canopy cover (i.e., registration of ground elevation) was only three percent. The depth of LiDAR penetration into the plant canopy varied according to plant species composition; plant species-specific corrections significantly improved LiDAR accuracy (58% reduction in overall uncertainty) and with the use of ground-based surveys, reduced overall RMSE to an average of 6.3 cm in vegetated areas. A supervised classification of AVIRIS data was used to generate a vegetation map with six classification types; overall classification accuracy averaged 59% with a kappa coefficient of 0.40. The vegetation classification map was overlaid with a LiDAR-based digital elevation model (DEM) to compute elevation distributions and frequencies of tidal inundation. The average elevations of the dominant plant classifications found in CSM (e.g., Salicornia virginica, Jaumea carnosa, and salt-grass mix, a mixture of multiple marsh plant species) occurred within a 17 cm range, a vertical change that resulted in a 7% difference in the period of tidal inundation.     

高光谱植被指数VIUPD的Matlab7.0实现

本文首先介绍了高光谱植被指数VIUPD,然后利用ENVI4.0对AVIRIS数据进行了预处理,并利用处理后的数据在Matlab7.0上实现了植被指数VIUPD,最后通过ENVI4.0进行了结果显示。结果表明,VIUPD比NDVI和EVI对于植被的变化更敏感。     

Carbon dioxide of Pu`u`O`o volcanic plume at Kilauea retrieved by AVIRIS hyperspectral data

A remote sensing approach permits for the first time the derivation of a map of the carbon dioxide concentration in a volcanic plume. The airborne imaging remote sensing overcomes the typical difficulties associated with the ground measurements and permits rapid and large views of the volcanic processes together with the measurements of volatile components exolving from craters. Hyperspectral images in the infrared range (1900-2100 nm), where carbon dioxide absorption lines are present, have been used. These images were acquired during an airborne campaign by the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) over the Pu`u` O`o Vent situated at the Kilauea East Rift zone, Hawaii. Using a radiative transfer model to simulate the measured up-welling spectral radiance and by applying the newly developed mapping technique, the carbon dioxide concentration map of the Pu`u` O`o Vent plume were obtained. The carbon dioxide integrated flux rate were calculated and a mean value of 396 ± 138 t d^− 1 was obtained. This result is in agreement, within the measurements errors, with those of the ground measurements taken during the airborne campaign.     

Integrating waveform lidar with hyperspectral imagery for inventory of a northern temperate forest

It has been suggested that attempts to use remote sensing to map the spatial and structural patterns of individual tree species abundances in heterogeneous forests, such as those found in northeastern North America, may benefit from the integration of hyperspectral or multi-spectral information with other active sensor data such as lidar. Towards this end, we describe the integrated and individual capabilities of waveform lidar and hyperspectral data to estimate three common forest measurements - basal area (BA), above-ground biomass (AGBM) and quadratic mean stem diameter (QMSD) - in a northern temperate mixed conifer and deciduous forest. The use of this data to discriminate distribution and abundance patterns of five common and often, dominant tree species was also explored. Waveform lidar imagery was acquired in July 2003 over the 1000 ha. Bartlett Experimental Forest (BEF) in central New Hampshire (USA) using NASA's airborne Laser Vegetation Imaging Sensor (LVIS). High spectral resolution imagery was likewise acquired in August 2003 using NASA's Airborne Visible/Infrared Imaging Spectrometer (AVIRIS). Field data (2001-2003) from over 400 US Forest Service Northern Research Station (USFS NRS) plots were used to determine actual site conditions.Results suggest that the integrated data sets of hyperspectral and waveform lidar provide improved outcomes over use of either data set alone in evaluating common forest metrics. Across all forest conditions, 8-9% more of the variation in AGBM, BA, and QMSD was explained by use of the integrated sensor data in comparison to either AVIRIS or LVIS metrics applied singly, with estimated error 5-8% lower for these variables. Notably, in an analysis using integrated data limited to unmanaged forest tracts, AGBM coefficients of determination improved by 25% or more, while corresponding error levels decreased by over 25%. When data were restricted based on the presence of individual tree species within plots, AVIRIS data alone best predicted species-specific patterns of abundance as determined by species fraction of biomass. Nonetheless, use of LVIS and AVIRIS data - in tandem - produced complementary maps of estimated abundance and structure for individual tree species, providing a promising adjunct to traditional forest inventory and conservation biology planning efforts.     

Wildfire temperature and land cover modeling using hyperspectral data

Wildfire temperature retrieval commonly uses measured radiance from a middle infrared channel and a thermal infrared channel to separate fire emitted radiance from the background emitted radiance. Emitted radiance at shorter wavelengths, including the shortwave infrared, is measurable for objects above a temperature of 500 K. The spectral shape and radiance of thermal emission within the shortwave infrared can be used to retrieve fire temperature. Airborne Visible Infrared Imaging Spectrometer (AVIRIS) data were used to estimate fire properties and background properties for the 2003 Simi Fire in Southern California, USA. A spectral library of emitted radiance endmembers corresponding to a temperature range of 500-1500 K was created using the MODTRAN radiative transfer model. A second spectral library of reflected solar radiance endmembers, corresponding to four vegetation types and two non-vegetated surfaces, was created using image spectra selected by minimum endmember average root mean square error (RMSE). The best fit combination of an emitted radiance endmember and a reflected solar radiance endmember was found for each spectrum in the AVIRIS scene. Spectra were subset to reduce the effects of variable column water vapor and smoke contamination over the fire. The best fit models were used to produce maps of fire temperature, fire fractional area, background land cover, land cover fraction, and RMSE. The highest fire temperatures were found along the fire front, and lower fire temperatures were found behind the fire front. Saturation of shortwave infrared channels limited modeling of the highest fire temperatures. Spectral similarity of land cover endmembers and smoke impacted the accuracy of modeled land cover. Sensitivity analysis of modeled fire temperatures revealed that the range of temperatures modeled within 5% of minimum RMSE was smallest between 750 and 950 K. Hyperspectral modeling of wildfire temperature and fuels has potential application for fire monitoring and modeling.     

Mapping mine wastes and analyzing areas affected by selenium-rich water runoff in southeast Idaho using AVIRIS imagery and digital elevation data

Remotely sensed hyperspectral and digital elevation data from southeastern Idaho are combined in a new method to assess mine waste contamination. Waste rock from phosphorite mining in the area contains selenium, cadmium, vanadium, and other metals. Toxic concentrations of selenium have been found in plants and soils near some mine waste dumps. Eighteen mine waste dumps and five vegetation cover types in the southeast Idaho phosphate district were mapped by using Airborne Visible-Infrared Imaging Spectrometer (AVIRIS) imagery and field data. The interaction of surface water runoff with mine waste was assessed by registering the AVIRIS results to digital elevation data, enabling determinations of (1) mine dump morphologies, (2) catchment watershed areas above each mine dump, (3) flow directions from the dumps, (4) stream gradients, and (5) the extent of downstream wetlands available for selenium absorption.Watersheds with the most severe selenium contamination, such as the South Maybe Canyon watershed, are associated with mine dumps that have large catchment watershed areas, high stream gradients, a paucity of downstream wetlands, and dump forms that tend to obstruct stream flow. Watersheds associated with low concentrations of dissolved selenium, such as Angus Creek, have mine dumps with small catchment watershed areas, low stream gradients, abundant wetlands vegetation, and less obstructing dump morphologies.