The use of natural essential oils as antimicrobial solutions in paper packaging. Part II

We have assessed the antimicrobial, vapor-phase activity of the following natural essential oils (EOs) when used in paraffin-based “active coatings” for paper packaging materials intended to come into contact with foods: clove (Sygzium aromaticum), cinnamon (Cinnamomum zeylanicum), and oregano (Origanum vulgare) EOs, and cinnamaldehyde-enriched cinnamon EO. To our knowledge, this is the first time that such an approach has been presented for consideration by the scientific community.     

Design and evaluation of an active electromechanical wheel suspension system

This paper presents an electromechanical wheel suspension, where the upper arm of the suspension has been provided with an electric levelling and a damper actuator, both are allowed to work in a fully active mode. A control structure for the proposed suspension is described. The complex design task involving the control of the electric damper and its machine parameters is tackled by genetic optimisation. During this process, these parameters are optimised to keep the power dissipation of the electric damper as low as possible, while maintaining acceptable comfort and road-holding capabilities. The results of the evaluations carried out demonstrate that the proposed suspension can easily adopt its control parameters to obtain a better compromise of performance than that offered by passive suspensions. If the vehicle is to maintain acceptable performance during severe driving conditions, the damper has to be unrealistically large. However, if the electric damper is combined with a hydraulic damper, the size of the electric damper is significantly reduced. In addition, the design of the electric damper with the suggested control structure, including how it regenerates energy, is discussed.     

Design of nonlinear controllers for active vehicle suspension with state constraints

Design of active vehicle suspension has tradeoffs between three main performance metrics (passenger comfort, suspension deflection and road holding ability). It has been known that each performance can be achieved by H _∞ controller and they can be gathered by LPV (Linear Parameter Varying) method. However, because the suspension deflection limit was not explicitly considered, this limit may be exceeded. In this paper, the authors propose a “reference shaping“ based method in order to improve the control performance. In this approach, a “virtual reference” signal is imposed to the system such that the suspension deflection is kept small. The effectiveness of the approach is examined by numerical simulations. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

TFT有源矩阵α－Si∶H薄膜PECVD淀积工艺研究

分析了α－Ｓｉ∶Ｈ薄膜的质量和厚度对α－Ｓｉ∶ＨＴＦＴ关键性指标的影响，深入、详细地讨论了其ＰＥＣＶＤ淀积工艺，并在实验的基础上确定了最佳淀积工艺参数，从而获得了高性能的７５ｍｍ３７２×２７６像素α－Ｓｉ∶ＨＴＦＴ有源矩阵     

The operational semantics of user-defined relationships in object oriented database systems

In semantic data models, abstract relationship (e.g. generalization, aggregation, etc.) semantics are defined, specifying how insertion, deletion and modification operations made at a higher level of abstraction can affect the objects abstracted over and vice versa. These semantics, also known as structural constraints, are expressed through so-called update rules. This perspective has been somewhat lost in most object-oriented systems, where user-defined relationships are supported as simple pointers and their semantics are embedded, distributed and replicated within the operations accessing these pointers. This paper inherits and extends the treatment of relationships found in semantic data models to behavioural object-oriented models by presenting an approach to uniformly capture the update rules for user-defined relationships. The stress is not on supporting relationships as first-class objects, but on describing their update rules (or operational semantics) through a set of constructors namely, reaction, anticipation, delegation and exception. The approach has been borne out by an implementation in an active object-oriented database system.     

活性酯硬化水玻璃砂的研究

用焙烧活性砂混制而成的活性酯硬化水玻璃砂与普通酯硬化水玻璃砂相比，强度成倍提高，从而减少水玻璃的加入量，改善水玻璃砂的溃散性。实验证明：原砂的表面活性直接影响在水玻璃砂中水玻璃的加入量，是改善水玻璃砂溃散性的关键之一。焙烧活性砂的水玻璃加入量只要１．５％～２．０％，即能满足实际生产的强度要求。     

湿浸法制备活性组分非均匀分布负载型催化剂过程的计算机模拟

对活性组分非均匀分布的负载型催化剂的湿浸法制备过程进行了计算机模拟,其模拟程度可适用于任意多个活性组分的浸渍。发现单组分浸渍时,通过控制浸渍时间可获得活性组分由薄到厚的蛋壳型分布和均匀分布,但通过预浸渍吸附至一定分布后,再在空白溶液中浸渍洗脱,控制洗脱条件也可获得蛋黄、蛋白型的分布;加入竞争吸附剂,进行双组分及多组分浸渍,通过控制浸渍溶液性质及浸渍时间可获得各种类型的活性组分分布,诸如蛋壳型、蛋白型、蛋黄型和均匀型。通过对制备过程参数(如竞争吸附剂的选择、各组分有效扩散系数、初始浓度、吸脱附速率常数等)与活性组分分布形式之间关系的分析,可实现对任一分布形式的催化剂的制备过程参数的优化。这对实际制备催化剂具有指导意义。     

基于HCM的可扩展路由器体系结构MER

本文提出了基于层次化协同模型的多维可扩展路由器MER。参考Open Router路由器模型,利用层次化协同模型实现了独立于数据层的控制平台CSP,奠定了开放控制的基础;基于功能插件和抽象插件构造了基于插件的路由器抽象层PRA,分离了控制与转发平面,支持路由器转发平面功能的动态扩展;并举例说明了MER中高效的网络应用控制路由选择机制,体现了直接控制原理,有助于设计更为复杂的控制策略。模拟结果表明,MER具有良好的扩展性,支持网络应用直接控制,为控制平面智能化奠定基础。     

引入趋近律的功率因数校正滑模控制仿真研究

提出一种引入趋近律的滑模变结构控制(SMVSC)方法来实现有源功率因数校正(APFC),减少电流的谐波成分.SMVSC是一种解决非线性时变系统(如APFC系统)问题的良好办法,但是实际应用中SMVSC的"抖振"现象问题必须要解决好.引入趋近律来削弱APFC系统在滑模控制中的"抖振"现象,并且依此推导出了控制APFC系统中的功率开关的PWM占空比.采用Matlab平台进行仿真验证控制策略控制APFC电路几乎得到单位功率因数,同时超调减小、响应时间缩短.