喷油方式对斜齿轮齿面温度的影响

为探讨喷油方式对齿面温度的影响，以斜齿轮为研究对象，通过CFD仿真和试验研究不同喷油方式对斜齿轮齿面温度的影响。针对斜齿轮喷油润滑过程的特点，分析其齿面摩擦生热量，简化轮齿喷油润滑计算模型，并基于CFX进行齿面对流换热仿真研究，得到了不同喷油方式下的齿面温度；基于功率开放式斜齿轮试验平台，对不同喷油方式下的齿面温度进行了试验测量，与仿真计算结果进行对比分析。结果表明：在高速重载斜齿轮传动系统中，啮出侧喷油润滑的方式比啮入侧喷油润滑方式的冷却降温效果要好。     

Constructing developable surfaces by wrapping cones and cylinders

We model developable surfaces by wrapping a planar figure around cones and cylinders. Complicated developables can be constructed by successive mappings using cones and cylinders of different sizes and shapes. We also propose an intuitive control mechanism, which allows a user to select an arbitrary point on the planar figure and move it to a new position. Numerical techniques are then used to find a cone or cylinder that produces the required mapping. Several examples demonstrate the effectiveness of our technique.     

ＰＤＣ钻头布齿设计技术

合理的布齿是保证PDC钻头具有优良工作性能的关键。目前常用的PDC钻头布齿设计方法是图解调整法，该方法速度慢，设计工作烦琐，工作量大，效率低，欠灵活，而且有时会出现不必要的误差。讨论了PDC钻头布齿设计的特点，按切削原则设计了钻头冠部形状，并选择了合理的切削结构，为PDC钻头布齿计算机辅助设计软件提供了理论支撑。     

Failure analysis of a broken tooth

Several days after heart surgery, a patient discovered his upper right canine tooth had broken at the root. Such tooth damage, recognized post-operatively, is usually assumed to be caused by blunt mechanical force from an instrument used by the anesthesiologist during placement of a breathing tube at the start of surgery. In this case, the patient had saved the crown portion of the broken tooth, and it was possible to examine the root fracture characteristics. The curvature and direction of the crack path and natural tooth situation suggested that failure could be described through a cantilever beam model. This was confirmed when a whole extracted sample tooth was embedded and broken by a measured force in a manner consistent with the model. The resulting fracture surface matched that of the patient’s broken canine tooth. However, the high load and force direction necessary to fracture the root was inconsistent with forces applied during the anesthesia procedure. The failure analysis and further investigation indicated tooth clenching on the breathing tube during recovery was the likely cause of fracture. This paper presents an alternate explanation for intubation-related dental injury, demonstrates the practicality of fractographic analysis of biological materials, and introduces a methodology for simulating in vitro tooth settings for mechanical testing.     

Imaging the domain pattern of the canted magnetization state in Co/Pt multilayer films

The exact magnetization pattern of magnetic films close to a spin-reorientation transition is difficult to analyze due to the intrinsically three-dimensional (3d) variation of the orientation of the local magnetization. We present a technique how this can be performed, based on the analysis of high quality 2d polarization maps from a single scanning electron microscope with polarization analysis (SEMPA) measurement with tilted sample. The key tool is the statistical distribution of all occurring polarization doublets, visualized in a 2d histogram plot. From the shape of the distribution the type of transition—canted-phase, or coexisting phases—can be inferred. For the canted-phase state, the canting angle can be accurately determined from geometrical considerations. With help of the histogram the image data can be analyzed and the three components of the magnetization can be calculated for most points of the image. For a Co/Pt multilayer film we found a cone state. The magnetization forms a complex pattern consisting of out-of-plane domains while the in-plane magnetization shows a maze pattern.     

螺纹钢牙筋长度不足的原因及解决办法

分析了影响螺纹钢牙筋长度的原因，根据铣床的工作原理，利用刀头夹持长度与凸轮工作轨面半径的几何关系，推导出计算各种不同规格螺纹钢牙筋的工艺参数，解决了螺纹钢牙筋长度不足之问题。     

圆锥式与斜平面式活络模的特点及比较

阐述了生产子午线轮胎用圆锥式和斜平面式活络模具在制造工艺、使用性能、维修和热传导等方面的差异。认为圆锥式结构更优于斜平面式。     

圆锥破碎机躯体裂纹的超声波探伤

重点介绍了圆锥破碎机躯体裂纹的超声波检测及缺陷判定的方法,为矿山其它大型设备的裂纹检测提供了经验。     

Subsurface Characterization at Ground Failure Sites in Adapazari, Turkey

Ground failure in Adapazari, Turkey during the 1999 Kocaeli earthquake was severe. Hundreds of structures settled, slid, tilted, and collapsed due in part to liquefaction and ground softening. Ground failure was more severe adjacent to and under buildings. The soils that led to severe building damage were generally low plasticity silts. In this paper, the results of a comprehensive investigation of the soils of Adapazari, which included cone penetration test (CPT) profiles followed by borings with standard penetration tests (SPTs) and soil index tests, are presented. The effects of subsurface conditions on the occurrence of ground failure and its resulting effect on building performance are explored through representative case histories. CPT- and SPT-based liquefaction triggering procedures adequately identified soils that liquefied if the clay-size criterion of the Chinese criteria was disregarded. The CPT was able to identify thin seams of loose liquefiable silt, and the SPT (with retrieved samples) allowed for reliable evaluation of the liquefaction susceptibility of fine-grained soils. A well-documented database of in situ and index testing is now available for incorporating in future CPT- and SPT-based liquefaction triggering correlations.     

Estimation of Load Capacity of Pipe Piles in Sand Based on Cone Penetration Test Results

Pipe piles can be classified as either closed- or open-ended piles. In the present paper, the load capacity of both closed- and open-ended piles is related to cone penetration resistance qc through an experimental program using calibration chamber model pile load tests and field pile load tests. A total of 36 calibration chamber pile load tests and two full-scale field pile load tests were analyzed. All the test piles were instrumented for separate measurement of each component of pile load capacity. Based on the test results, the normalized base resistance qb/qc was obtained as a function of the relative density DR for closed-ended piles, and of both the relative density DR and the incremental filling ratio (IFR) for open-ended piles. A relationship between the IFR and the relative density DR is proposed as a function of the pile diameter and driving depth. The relationship between IFR and DR allows the estimation of IFR and thus of the pile load capacity of open-ended piles at the design stage, before pile driving operations.