Laboratory Studies to Determine Suitable Chemicals to Improve Oil Recovery from Garzan Oil Field

Garzan oil field is located at the south east of Turkey. It is a mature oil field and the reservoir is fractured carbonate reservoir. After producing about 1% original oil in place (OOIP) reservoir pressure started to decline. Waterflooding was started in order to support reservoir pressure and also to enhance oil production in 1960. Waterflooding improved the oil recovery but after years of flooding water breakthrough at the production wells was observed. This increased the water/oil ratio at the production wells. In order to enhance oil recovery again different techniques were investigated. Chemical enhanced oil recovery (EOR) methods are gaining attention all over the world for oil recovery. Surfactant injection is an effective way for interfacial tension (IFT) reduction and wettability reversal. In this study, 31 different types of chemicals were studied to specify the effects on oil production. This paper presents solubility of surfactants in brine, IFT and contact angle measurements, imbibition tests, and lastly core flooding experiments. Most of the chemicals were incompatible with Garzan formation water, which has high divalent ion concentration. In this case, the usage of 2-propanol as co-surfactant yielded successful results for stability of the selected chemical solutions. The results of the wettability test indicated that both tested cationic and anionic surfactants altered the wettability of the carbonate rock from oil-wet to intermediate-wet. The maximum oil recovery by imbibition test was reached when core was exposed 1-ethly ionic liquid after imbibition in formation water. Also, after core flooding test, it is concluded that considerable amount of oil can be recovered from Garzan reservoir by waterflooding alone if adverse effects of natural fractures could be eliminated.     

致密油藏注天然气提高采收率研究现状

随着我国石油需求量不断增加,致密油藏的开发也愈发重要。如何高效开发致密油藏是一项重点难点,其中致密油藏注天然气提高采收率是一个极具潜力的研究方向。因此,本文着重介绍以天然气作为能量补充介质在国内外的研究现状和应用现状,并且从两相特征等方面总结了理论研究中的一些机理,对致密油藏注天然气提高采收率的发展前景进行了一定的展望。     

An enhanced anti-disturbance attitude control law for flexible spacecrafts subject to multiple disturbances

As well-known disturbance rejection methods, active disturbance rejection control and disturbance observer-based control can effectively improve the control performances of complex systems in the presence of disturbances. However, the accurate rejection of multiple disturbances for control systems of practical engineering, for example, the attitude control system of flexible spacecraft, is still a bottleneck problem. In order to further improve the anti-disturbance capability and reduce the conservativeness, this paper proposes a novel enhanced anti-disturbance control law for the attitude control system of flexible spacecraft by combining active disturbance rejection control and disturbance observer-based control in a unified framework. More specifically, the disturbance from flexible vibration is described by an uncertain exogenous system based on the partially known information including elastic damping ratios and modal frequencies. The disturbance observer-based control is utilized to estimate and thereby reject this disturbance. On the other hand, the other disturbances such as external environmental disturbance and complex model nonlinearity are merged into a equivalent disturbance with bounded derivative, which is compensated by using the active disturbance rejection control law. Stability and robustness analysis are carried out for the disturbance observer and extended state observer. Finally, simulation results of low-earth-orbit flexible satellite are presented to verify the effectiveness of proposed methods.     

Analytical, numerical and experimental investigations of transverse fracture propagation from horizontal wells

This paper presents results of a comprehensive study involving analytical, numerical and experimental investigations into transverse fracture propagation from horizontal wells. The propagation of transverse hydraulic fractures from horizontal wells is simulated and investigated in the laboratory using carefully designed experimental setups. Closed-form analytical theories for Mode I (opening) stress intensity factors for idealized fracture geometries are reviewed, and a boundary element-based model is used herein to investigate non-planar propagation of fractures. Using the mixed mode fracture propagation criterion of the model, a reasonable agreement is found with respect to fracture geometry, net fracture pressures and fracture propagation paths between the modeled fractures and the laboratory tested fractures. These results suggest that the propagation of multiple fractures requires higher net pressures than a single fracture, the underlying reason of which is theoretically justified on the basis of local stress distribution.     

我国风机盘管技术现状分析

介绍了近年来我国在风机盘管技术领域的最新成果，在结构形式、强化传热、提高室内空气品质、降低噪音和提高自动控制水平等方面的技术进展情况，分析了目前风机盘管中存在的问题，并对今后的发展方向进行了展望。     

压电复合材料PT－P（VDF／TeFE）的静水压压电性

用热轧辊机制备了压电复合材料ＰＴ－Ｐ（ＶＤＦ／ＴｅＦＥ），并利用ＬＣＲ电桥和Ｂｅｒｌｉｎｃｏｕｒｔ电路分别测量了其介电常数和压电常数，实验结果表明它具有良好的静水压压电特性。最后讨论了该复合材料在水听器中的应用     

Investigation on Three Types of Residues in Phase-unwrapping

In phase unwrapping, how to control the residues and cut-lines is critical to unwrap ill-state wrapped phase map successfully. Some new concepts in phase unwrapping field are proposed. Firstly, the residues in three types, I.e., singular residues, normal residues and virtual residues, are classified, which leads to some rational unwrapping paths. Secondly, some differences between cut-line and curved-line are analyzed. And finally, experiment is carried out to compare our new enhanced Goldstein algorithm with the original Goldstein algorithm.     

Debugging programs that use macro-oriented data abstractions

Enhanced C (EC) is a set-oriented, extensible, C-like language. EC uses data abstractions to define new types. These data abstractions, called clusters, are macro-like devices that perform substitution on the typed syntax tree. Debugging programs that use clusters raise problems that are not encountered in ordinary programming languages. At compile time there is a need to determine and report whether the macro expansion will result in a legal program before this expansion actually takes place. At run-time the problems are how to account for replaced statements and how to handle variables whose types have been established by the clusters, variables that disappear, or variables whose names have been changed. This article presents these problems and their solutions as implemented by the EC compiler and the EC symbolic debugger. Similar debugging problems appear in other languages: The need to handle variables at run time is common to all languages that support data abstraction even if the abstractions are procedure oriented; also, a mild form of the problem of the replaced statement appears in inline procedure substitution of Ada. The solutions developed for the EC debugger apply to these cases as well.     

Spontaneous emulsification aspect of enhanced oil recovery

Recent studies have suggested the possibility of spontaneous emulsification as a mechanism for enhanced oil recovery (EOR). The discussions have, however, remained essentially qualitative. A study was therefore undertaken to estimate quantitatively the contribution of spontaneous emulsification as an EOR mechanism. The tests were conducted on several bulk liquid/liquid systems as well as by displacement experiments in unconsolidated synthetic sand packs. Spontaneous emulsification was found to be a mechanism for EOR: the estimated extra contribution to EOR due to this mechanism was found to be significant in laboratory scale displacement experiments. Tertiary recovery was always greater when spontaneous emulsification was evident than otherwise. Results of tests on bulk liquid/liquid systems indicate that the occurrence or absence of spontaneous emulsification can be correlated with the values of ‘partition parameter’. It may be concluded that higher oil recoveries may be achieved in chemical EOR processes where interface mass transfer (and the accompanying spontaneous emulsification) occurs. The evaluation of efficiency of residual oil mobilisation through the capillary number theory (with and without spontaneous emulsification) is also discussed. Displacement tests with spontaneously emulsifying systems showed that residual oil left behind a conventional waterflood was mobilised in a range of capillary numbers much less than that which applies to low-tension waterfloods.     

ENHANCED RECOVERY OF MEDIUM CRUDE OIL IN HETEROGENEOUS RESERVOIRS USING AIR INJECTION/IN SITU COMBUSTION—HORIZONTAL WELL TECHNOLOGY

A simple 3-D physical model has been developed to investigate the use of in-situ combustion in heterogeneous reservoirs. Gas over-ride phenomena is one of the major causes of instability of combustion process; gas override results in poor sweep efficiency with subsequent low oil recovery. However, the use of horizontal wells in direct line drive arrangement has shown a great deal of combustion stability and propagation by means of controlling gas override This paper has extended the scope of using horizontal wells in direct line drive configuration in heterogeneous reservoirs. Three cases of reservoir heterogeneity were investigated in this study. In the first case, a dual-layer permeability of sand was used (a high permeability layer on top and a low permeability layer on bottom); in the second case, placement of the aforementioned layers was swapped, and in the third case, a high permeability streak was sandwiched between two low permeability layers of fine sand. The results indicated that a stable combustion front has been achieved in the first two cases with a high oil recovery, however the performance of the combustion process markedly deteriorated when a high permeability streak layer was utilised as a result of a severe low temperature oxidation due to oxygen channelling through the streak, with subsequent poor sweep efficiency and in turn low oil recovery. The use of horizontal wells as producers and injectors in a line drive configuration is beneficial and effective for minimising the effect of reservoir heterogeneity to some extent.