Experimental research on combined effect of obstacle and local spraying water fog on hydrogen/air premixed explosion

In order to reveal the mechanism of water fog explosion suppression and research the combined effect of water fog and obstacle on hydrogen/air deflagration, multiple sets of experiments were set up. The results show that the instability of thermal diffusion under lean combustion conditions is the main influencing factor of hydrogen/air flame surface instability, and the existence of water fog will aggravate the hydrogen/air flame surface instability. When obstacle is not considered, 8 μm, 15 μm, 30 μm water fog can significantly reduce the flame velocity and explosion overpressure of hydrogen/air, 45 μm fine water fog plays the opposite role. When considering the relative position of the water fog release position and the obstacle, the 8 μm, 15 μm, 30 μm water fog has almost no suppression effect when released near the obstacle, but a significant suppression effect occur, when using the 45 μm water fog. In the field of theoretical research, the research results not only provide an experimental basis for the fine water fog to reduce the consequences of hydrogen explosion accidents, and the optimal diameter range used by the water fog, but also provide experimental reference for the numerical simulation of hydrogen/air explosion suppression in semi-open space, and promote the development of hydrogen explosion suppression theory. In terms of engineering applications, this study can provide a theoretical basis for the layout of fire fighting equipment in the engine room of nuclear power plants or hydrogen-powered ships.     

局部施肥对植株生长及根系形态的影响

本文论述了局部施肥对植株地上部与地下部的影响。局部施肥促进了施肥区根系的发达 ,第一侧根与第二侧根较多 ,根的吸收表面积增多 ,根鲜重增加 ,对养分的吸收能力增强 ,但整个根系与地上部的干鲜重下降。     

等误差直线逼近非圆曲线节点计算新方法

传统的等误差直线逼近法从被逼曲线的端点开始计算节点.文章在此基础上提出一种非圆曲线节点计算新方法,以被逼曲线曲率半径最小点开始,按等误差法求取节点,再根据曲线规律对节点重新进行排序,输出节点坐标值.用该种方法逼近曲线,在逼近误差等于等误差法逼近误差的条件下,节点数少于等误差法求得的节点数,文中用C语言编写新方法求取节点程序,并与传统方法进行比较,最后用曲线方程进行验证,结论正确,具有实际意义.     

A binary approximating method for graspable region determination of biped climbing robots

For a biped pole-climbing robot (BiPCR) with grippers, it is an essential demand to determine the target grasp configuration for climbing and transiting between poles, with the graspable region as a priori knowledge. The graspable region on the target pole is critically important for climbing path planning and motion control. To efficiently compute the graspable region for a BiPCR, we propose a novel binary approximating method in this paper. This method may also be applied to generate the three-dimensional (3-D) workspace of a manipulator with constant orientation. The grasping problem and the concept of graspable region for a BiPCR are first introduced. The binary approximating method and the corresponding algorithms are then presented to generate the graspable region. Additional constraints on a biped climbing robot with five degrees of freedom (DoFs) are presented as a supplement to the algorithm. A series of comprehensive simulations are conducted with the five-DoF and six-DoF climbing robots to verify the effectiveness of the proposed method. Finally, the dexterity of biped climbing robots with different DoFs is discussed.     

Nighttime face recognition at large standoff: Cross-distance and cross-spectral matching

Face recognition in surveillance systems is important for security applications, especially in nighttime scenarios when the subject is far away from the camera. However, due to the face image quality degradation caused by large camera standoff and low illuminance, nighttime face recognition at large standoff is challenging. In this paper, we report a system that is capable of collecting face images at large standoff in both daytime and nighttime, and present an augmented heterogeneous face recognition (AHFR) approach for cross-distance (e.g., 150 m probe vs. 1 m gallery) and cross-spectral (near-infrared probe vs. visible light gallery) face matching. We recover high-quality face images from degraded probe images by proposing an image restoration method based on Locally Linear Embedding (LLE). The restored face images are matched to the gallery by using a heterogeneous face matcher. Experimental results show that the proposed AHFR approach significantly outperforms the state-of-the-art methods for cross-spectral and cross-distance face matching.     

基于组合方法的人脸识别算法研究

该文试探一种加权融合流形学习的方法进行人脸识别,该算法通过Haar小波和局部线性嵌入（LLE）加权融合的方式来进行人脸识别。首先通过Haar小波变换对人脸图像进行一级分解,得到四个子图;然后利用LLE算法对四个子图降维处理,并加权融合;最后利用支持向量机（SVM）进行分类判决。通过在ORL库中进行实验,结果表明,该文提出的Haar＋LLE识别效率比单独使用主成分分析（PCA）和LLE更高效。     

基于插值细分的逼近细分法

通过在Hassan的四点三重插值细分法中引入一个偏移变量,推导出了一种逼近细分法,从而使三重逼近细分和插值细分统一到一个细分格式.该方法利用细分格式的生成多项式,在理论上分析了提出的细分格式的一致收敛性和Ck连续性;通过对细分格式中参数u取不同的值,可对生成的极限曲线形状进行控制.数值实验结果表明,文中方法是合理有效的.     

Locally linear discriminant embedding: An efficient method for face recognition

In this paper an efficient feature extraction method named as locally linear discriminant embedding (LLDE) is proposed for face recognition. It is well known that a point can be linearly reconstructed by its neighbors and the reconstruction weights are under the sum-to-one constraint in the classical locally linear embedding (LLE). So the constrained weights obey an important symmetry: for any particular data point, they are invariant to rotations, rescalings and translations. The latter two are introduced to the proposed method to strengthen the classification ability of the original LLE. The data with different class labels are translated by the corresponding vectors and those belonging to the same class are translated by the same vector. In order to cluster the data with the same label closer, they are also rescaled to some extent. So after translation and rescaling, the discriminability of the data will be improved significantly. The proposed method is compared with some related feature extraction methods such as maximum margin criterion (MMC), as well as other supervised manifold learning-based approaches, for example ensemble unified LLE and linear discriminant analysis (En-ULLELDA), locally linear discriminant analysis (LLDA). Experimental results on Yale and CMU PIE face databases convince us that the proposed method provides a better representation of the class information and obtains much higher recognition accuracies.     

最大比率圆弧逼近轮廓的匹配方法

提出了一种新的圆孤逼近轮廓曲线进行目标匹配的方法-最大比率法。曲线上两点之间的圆弧和曲线夹成的面积与对应扇形的比值随曲线上点的曲率的变化而变化。通过设置一个阈值算法可以检测曲率的较大的特征点用于圆弧逼近匹配。