Effect of flow on solutions of rod-coil block co-polymers

An elongational flow field is imposed on a solution of block copolymers consisting of semirigid macromolecules with rigid, rodlike sequences of units in combination with random coil (flexible) units. The problem is formulated according to the lattice treatment of Matheson and Flory. In this formulation, the system consists of rigid blocks whose lengths and locations are fixed by the structure within each macromolecule. These blocks are separated by random coiled units. An excess free energy other than the equilibrium Gibbs free energy of the quiescent solution has to be considered due to the flow field that tends to align the rods. This excess free energy is calculated from the potential energy of rods when a steady-state, homogeneous and irrotational flow field is applied to the solution. The effects of composition, polymer-solvent interaction, size of the co-polymer and flow rates are investigated. Depending on the size and number of rods, some of the chains studied exhibit a biphasic region at equilibrium that shifts to lower concentrations with increasing flow. Longer chains with shorter rods that are isotropic at equilibrium, exhibit a biphasic region at finite values of flow. The degree of orientation increases sharply when the system is biphasic. For larger flows, the orientation function is very close to unity which is perfect orientation.     

Study on the c-axis preferred orientation of ZnO film on various metal electrodes

ZnO thin film was deposited on various metal electrodes by reactive sputtering, and c-axis preferred orientation of the film has been studied. ZnO, which has high piezoelectricity, is promising for oscillators or filter devices such as surface acoustic wave (SAW) device, gas sensor, and film bulk acoustic resonator (FBAR). But, for the application of ZnO film for these devices, the film should be grown with c-axis normal to the electrode. In this study, Pt, Al, and Au were deposited on Si wafer, and the surface roughness and crystal structure of the ZnO film on the electrode were investigated using AFM, scanning electron microscopy (SEM), and X-ray diffraction (XRD). Columnar structures of ZnO films were grown with c-axis normal to all electrodes, and among them Pt electrode showed the highest preferred orientation of ZnO film.     

油气输送管线冰堵定位检测技术的开发与应用

冬季油气输送管线的冰堵时刻威胁着高寒地区石油化工装置的安全运行，带式传感器动态应变定位检测技术的研制与开发解决了这一难题，它能迅速而准确地查找冰堵点，从而保证炼化装置的冬季正常运行。     

Molecular orientation and stress in biaxially deformed polymers. II. Steady potential flow

The development of biaxial segmental orientation and stress in a flexible-chain polymer fluid subjected to steady biaxial extensional flow is analyzed. Closed-formula model based on the Padè approximation of the inverse Langevin function in the non-Gaussian distribution of the chain end-to-end vectors is considered. The approach is free from the limitations related to finite chain extensibility and slow convergence of the series expansion formulations at higher chain deformations.Segmental orientation is characterized by the average orientation tensor, related axial orientation factors and global orientation anisotropy. Orientational behavior and corresponding stresses in the biaxial elongational potential flow are discussed in a wide range of elongation rates. Orientation characteristics calculated for the biaxial flow deformation are much higher than those predicted for the affine biaxial stretch deformation in polymer solids.     

Detailed mapping of biaxial orientation in polyethylene terephthalate bottles using polarised attenuated total reflection FTIR spectroscopy

Polarised attenuated total reflection FTIR spectroscopy has been used for detailed orientation mapping of 2l polyethylene terephthalate bottles subjected to different preform heating times. The results for the bottle with the standard preform heating time reveal significant surface orientation variations along the bottle hoop and length directions, with the inner bottle surface also showing consistently greater chain orientation in the hoop direction than found for the outer surface. Decreasing the preform heating time has less effect on the chain orientation than increasing the heating time, with the latter causing reduced chain orientation in the final bottle. The absorbance of the 1340 cm⁻¹ band provides a quick and reliable indication of these chain orientation trends. In contrast, the extent of benzene ring orientation parallel to the bottle surface showed little variation and remained consistently high at the majority of the surface bottle positions probed.     

一种基于人员定位的矿井综合通信系统

针对目前矿井井下通信系统功能不完善,技术与实现复杂的现状,提出了一种基于井下人员定位的综合通信监控系统。详细介绍了定位原理与具体实现过程,给出了系统中关键设备基站（BS）与人载通信器的结构原理图,并对综合通信与监控功能的实现进行了分析,最后给出了CMC管理软件的系统功能框图。     

TEM and DFT investigation of CVD TiN/κ-Al2O3 multilayer coatings

This paper investigates the interfacial structure in hot-wall CVD TiN/κ-Al₂O₃ multilayer coatings using both HREM and DFT modeling. Two multilayers with different thicknesses of the TiN layers (50 and 600 nm) separating the κ-Al₂O₃ layers are analyzed. The general microstructure of the two multilayers is relatively similar. The TiN layer in the thicker TiN/κ-Al₂O₃ coating is thick enough to be several TiN grains high. This means that epitaxial columns, which are often found in the thinner TiN/κ-Al₂O₃ coatings, are not present. However, the orientation relationships at the TiN/κ-Al₂O₃ interfaces are the same in both multilayers. The HREM investigations show that κ-Al₂O₃ (001) planes can grow directly on flat (111) TiN faces, without any other phases or detectable amounts of impurities, such as sulphur, present. Where the TiN layers are more curved, γ-Al₂O₃ can be grown, at least partly stabilized by the cube-on-cube orientation relationship between γ-Al₂O₃ and the underlying TiN. The DFT calculations show very similar adsorption strengths for an O monolayer positioned on Ti-terminated TiC(111) and TiN(111) surfaces, with preferred adsorption in the fcc site. O adsorption on N-terminated TiN(111) is much weaker, with preferred adsorption in the top site. Calculated elastic-energy contributions yield a higher stability for κ-Al₂O₃ on TiN(111) than on TiC(111) and a higher stability for κ-Al₂O₃ than for α-Al₂O₃ on both TiC and TiN. This indicates that the observed higher stability of κ-Al₂O₃ on TiC(111) than on TiN(111) is not due to the lattice mismatch, while the preferred epitaxial growth of κ-Al₂O₃ over α-Al₂O₃ can be partly attributed to the mismatch.     

氧化剂对Cu-Al2O3复合材料微观组织的影响

研究了一种新型简化内氧化工艺,并制备了不同氧源系数的Cu-Al2O3复合材料。用SEM、TEM等分析手段对所制备复合材料烧结态的微观组织进行了研究。结果表明,该简化工艺成功制备了Cu-Al2O3复合材料,在铜基体上弥散分布着大量细小的γ-Al2O3颗粒,其粒径为5~20nm,颗粒间距为25~60nm,当氧源系数(k)为1.20时,压制粉末经烧结(950℃,4h)后全部完成内氧化,此氧化剂含量为最佳的内氧化氧化剂添加量。