DS1620实现的X射线采集板温度自动控制

DR是目前非常先进的X射线成像技术，将其X射线采集板工作温度控制在最佳工作范围可采集更好的图像。本系统采用PC和单独控制双模块分别控制温度，利用半导体传感器DS1620进行四路温度采集，通过单片机和PC串口通信，用PC通过半导体制冷芯片来控制X射线采集板的工作温度，在通信故障时也可以通过单独控制模块来控制采集板的温度。     

The stress intensity factors for a short crack partially penetrating an inclusion of arbitrary shape

Some approximate solutions for predicting the stress intensity factor of a short crack penetrating an inclusion of arbitrary shape have been developed under mode I and mode II loading conditions. The derivation of the fundamental formula is based on the transformation toughening theory. The transformation strains in the inclusion are induced by the crack-tip field and remotely applied stresses, and approximately evaluated by the Eshelby equivalent inclusion theory. As validated by detailed finite element (FE) analyses, the developed solutions have good accuracy for different inclusion shape and for a wide range of modulus ratio between inclusion and matrix material.     

Finite element analysis of a center crack specimen warm pre-stressed under different modes of loading

Load bearing capacity of cracked specimens can be improved following pre-loading procedures like warm pre-stressing (WPS). In this paper, the effects of modes I and II pre-loading on fracture load of a central angled crack specimen are studied by finite element analysis. The specimen is reloaded either in mode I or in mode II. To predict the fracture load of cracked specimen after pre-loading, the maximum tensile stress (MTS) and maximum shear stress (MSS) criteria are used. It is shown that mode II fracture load is independent of pre-loading but the mode I fracture load is highly improved after warm pre-stressing. The mode mixity of the specimen is also changed when the pre-loading and reloading modes are not identical. An increase in the fracture load of the specimen following pre-loading may be due to change of failure mode as predicted by finite element analysis in this work.     

基于Native Mode ATM API的应用系统模型及关键技术

ＡＴＭ技术作为Ｂ－ＩＳＤ的基础，在传输包括话音、图像、数据的综合业务环境中具有现有其它网络技术所不具备的技术优势，然而目前真正基于ＡＴＭＮａｔｉｖｅＭｏｄｅ的应用还很少，而大量基于Ｏｖｅｒｌａｙ Ｍｏｄｅ的ＡＴＭ应用不能充分发挥ＡＴＭ技术的优势。随着信息技术的发展，将会有大量的综合业务应用出现，它具有和传统数据通信安全不同的业务特性，必须通过一种灵活，高效的应用程序接口给予支持，本文提出基于Ｎａｔ     

钻速模式动态辨识方法研究

目的：钻进过程是一个复杂的工艺过程，影响钻速的因素错综复杂。为钻井参数优化和实时控制，提出钻速动态模型。方法：对影响钻速的因素进行分析，用系统辨识方法建立钻速模式。结果：利用该方法建立了华北油田岔河集地区的钻速模型，取得满意结果。结论：此动态钻速模式能更准确、科学地描述钻进过程，并在钻井参数最优化、钻井过程的闭环控制等方面具有广阔的应用前景。     

利用网络技术实施财务集中控制

针对企业集团分权化管理的缺点，设计出一套利用互联网络技术实现企业集团财务集中控制的模式，给出了模式的图示及说明。     

Micromechanical modelling of ductile crack growth in the binder phase of WC–Co

This study focuses on numerical simulation of ductile failure in the Co binder phase of WC–Co hardmetal. The growth of edge cracks under mode I loading is considered. A computational micromechanics approach is taken where the Co binder ligaments are explicitly represented in finite element models. An embedding technique is employed. Crystal plasticity theory is used to represent plastic deformation in the Co ligaments. Crack propagation in the binder is simulated using an element removal technique based on a modified Rice and Tracey model for ductile void growth, and fracture resistance curves are generated. Parameter studies are performed for variations in microstructrual parameters such as numbers of Co ligaments ahead of the crack tip and local Co volume fraction. The importance of thermal residual stresses and finite element mesh density are also investigated.     

光纤模式噪声的研究

综述了光纤模式噪声的产生、计算，并介绍了减小它的一些方法。     

ATM交换机的硬件体系结构探讨

本文首先对ＡＴＭ的背景作了一个简单的介绍，接着阐述了ＡＴＭ和ＡＴＭ交换机的主要原理和技术，然后从硬件系结构的角度具体地分析了一种实验ＡＴＭ交换机是怎样ＡＴＭ技术的详细方法。     

超高压输电线路分裂导线通道模式理论分析

本对分裂导线传输电磁波的模式理论进行了分析，从所解特征根中选择一组最简单的模分量传递信息，并阐述了传输规律。