Coupling in situ experiments and modeling – Opportunities for data fusion,machine learning,and discovery of emergent behavior

This paper reviews recent studies, that not only includes both experiments and modeling components, but celebrates a close coupling between these techniques, in order to provide insights into the plasticity and failure of polycrystalline metals. Examples are provided of studies across multiple-scales, including, but not limited to, density functional theory combined with atom probe tomography, molecular dynamics combined with in situ transmission electron miscopy, discrete dislocation dynamics combined with nanopillars experiments, crystal plasticity combined with digital image correlation, and crystal plasticity combined with in situ high energy X-ray diffraction. The close synergy between in situ experiments and modeling provides new opportunities for model calibration, verification, and validation, by providing direct means of comparison, thus removing aspects of epistemic uncertainty in the approach. Further, data fusion between in situ experimental and model-based data, along with data driven approaches, provides a paradigm shift for determining the emergent behavior of deformation and failure, which is the foundation that underpins the mechanical behavior of polycrystalline materials.     

Improving weld formability by a novel dual-rotation bobbin tool friction stir welding

A novel dual-rotation bobbin tool friction stir welding (DBT-FSW) was developed, in which the upper shoulder (US) and lower shoulder (LS) have different rotational speeds. This process was tried to weld 3.2 mm thick aluminum-lithium alloy sheets. The metallographic analysis and torque measurement were carried out to characterize the weld formability. Experimental results show that compared to conventional bobbin tool friction stir welding, the DBT-FSW has an excellent process stability, and can produce the defect-free joints in a wider range of welding parameters. These can be attributed to the significant improvement of material flow caused by the formation of a staggered layer structure and the unbalanced force between the US and LS during the DBT-FSW process.     

Residual learning rates in lead-acid batteries: Effects on emerging technologies

The low price of lead-acid, the most popular battery, is often used in setting cost targets for emerging energy storage technologies. Future cost reductions in lead acid batteries could increase investment and time scales needed for emerging storage technologies to reach cost-parity. In this paper the first documented model of cost reductions for lead-acid batteries is developed. Regression to a standard experience curve using 1989–2012 data yield a poor fit, with R² values of 0.17 for small batteries and 0.05 for larger systems. To address this problem, battery costs are separated into material and residual costs, and experience curves developed for residual costs. Depending on the year, residual costs account for 41–86% of total battery cost. Using running-time averages to address volatility in material costs, a 4-year time average experience curve for residual costs yield much higher R², 0.78 for small and 0.74 for large lead-acid batteries. The learning rate for residual costs in lead-acid batteries is 20%, a discovery with policy implications. Neglecting to consider cost reductions in lead-acid batteries could result in failure of energy storage start-ups and public policy programs. Generalizing this result, learning in incumbent technologies must be understood to assess the potential of emerging ones.     

加工高酸油品加氢反应进料加热炉炉管的选材

论述了加氢装置反应进料加热炉炉管经常出现的晶间腐蚀的形成原因、控制方法以及近年来油品中出现的环烷酸对炉管的腐蚀影响,并结合工程实例,讨论了综合考虑强度和防止这两种腐蚀的炉管选材的问题。     

Investigation into polishing process of CVD diamond films

A new technique used for polishing chemical vapor deposition (CVD) diamond films has been investigated, by which rough polishing of the CVD diamond films can be achieved efficiently. A CVD diamond film is coated with a thin layer of electrically conductive material in advance, and then electro-discharge machining (EDM) is used to machine the coated surface. As a result, peaks on the surface of the diamond film are removed rapidly. During machining, graphitization of diamond enables the EDM process to continue. The single pulse discharge shows that the material of the coated layer evidently affects removal behavior of the CVD diamond films. Compared with the machining of ordinary metal materials, the process of EDM CVD diamond films possesses a quite different characteristic. The removal mechanism of the CVD diamond films is discussed.     

一起罕见的粗氩充装爆炸事故

对一起粗氩 充装设备发生爆炸事故进行了现场介绍、原因分析，找出了导致事故的主因，并提出了防范措施．     

SGXP—400液压泥炮的应用及其性能分析

通过本钢５＃高炉液压泥炮的技术改造实践，阐述了斜底座式液压泥炮在大型高炉上的应用情况，并且进一步对ＳＧＸＰ—４００液压泥炮的某些性能特点及其液压系统进行了分析。     

我国放射性物质运输概况

本文介绍了我国放射性物质运输概况(除台湾省外)。目前,全国放射性物质货包的年运输最约10万件,总放射性活度为1.8PBq,运输的放射性同位素主要是~(131)I、~(32)P 和~(198)Au 等。承运人员的年剂量当量是相当低的,一般小于5mSv。由于十分重视放射性物质的安全运输,所以没有发生过严重事故。文中还讨论了放射性物质运输中的防护问题。     

管道流体瞬态—水汽锤计算原理

文中介绍了核电站管道中流体瞬态——水汽锤的计算原理;既适用于液体介质的水锤计算,也适用于可压汽体的汽锤计算.对于一些典型管道部件的处理方法,文中也作了讨论。     

CRITERIA FOR THE QUALITY ASSESSMENT OF CONSTITUTIVE EQUATIONS DEDICATED TO CUTTING MODELS

Determination of the flow stress under metal cutting conditions is difficult because high values of strains, strain rates and temperature exist in practical machining operations. Conventional tests for determining flow stress data cannot duplicate these deformation conditions and therefore, extrapolation will be required. In this study we have investigated critical issues regarding the constitutive equation determination by direct methods such as split Hopkinson's pressure bar bench (SHPB) tests. Quantitative analysis about the suitability of an experimentally determined constitutive equation for different purpose modeling is provided, leading to guidelines for the quality improvement of constitutive law dedicated to cutting, from the points of view of formulation and identification sequence.