A robust adaptive pole‐placement controller without strictly positive real condition

This paper considers the adaptive pole‐placement control problem for system (1) with unmodelled dynamics η_n dominated by a small constant ε multiplied by a quantity independent of ε but tending to infinity as the past input, output, and noise grow. Using bounded external excitation and randomly varying truncation techniques, we give a design method of adaptive pole‐placement controller. It is shown that the closed‐loop system is globally stable, the estimation error for the parameter contained in the modelled part is of order ε, and the closed‐loop system under the adaptive pole‐placement control law is suboptimal in the sense of $$\mathop{\lim\sup}\limits_{{n\to\infty }}{1\over n}\mathop{\sum}\limits_{i=0}^n{\left({A^{*}(z)y_{n}‐L(z)C(z)w_{n}‐B(z)R(z)y_{n}^{*}}\right)^{2}{\leq}O({\varepsilon}^{2})+\gamma^{2}\mathop{\sum}\limits_{j=1}^q{b_{j}^{2}}}$$\nopagenumbers\end while the SPR condition used usually in other papers is replaced by a stability condition. Copyright © 2001 John Wiley & Sons, Ltd.     

SPR光谱信号的无基线质心法

为提高角度调制型表面等离子体共振(SPR)传感器的信噪比、分辨率等指标,并减少运算量,在分析固定基线质心法、基于幅值的动态基线质心法的基础上,提出一种确定SPR共振角的无基线质心法。运用SpreetaTM传感器和自行研制的SPR检测仪器,开展多种质量浓度的氯化钠和蔗糖溶液实验,获得SPR光谱数据,并分别采用上述三种质心法进行SPR共振像素计算,得到SPR监控曲线;分析比较三种质心法的运算速度、光源波动敏感度、信噪比和分辨率等指标。结果表明无基线质心法具有运算速度快、不受光源波动影响、信噪比高、分辨率高等特点,能有效提高SPR传感器和检测系统的性能。     

基于表面等离子体共振传感器的尿微量白蛋白检测

检测尿微量白蛋白(MAU)可对轻微肾脏损害进行早期诊断,也可对高血压患者可能发生的心脑血管事件进行预测。实验将抗体通过巯基自组装固定于Au膜表面,研制了一种快速检测MAU的表面等离子体共振(SPR)生物传感器。结果表明:直接检测法可以检测到0.3μg/L的MAU,而纳米Au放大法检测限可以低至0.03μg/L。     

Signal enhancement of surface plasmon resonance-based immunoassays for the allergen detection

A surface plasmon resonance (SPR) biosensor was used to determine the recombinant group 1 house dust mite allergen (rDer f1) in both HBS-EP buffer and fetal bovine serum (FBS). The monoclonal antibody was immobilized onto the CM5 sensor chip surface using an amine coupling method. The procedures of antibody immobilization and the subsequent primary and enhanced immunoassay were monitored in real time. The sensitivity for rDer f1 detection was remarkably improved by using intact polyclonal antibody as signal amplifying agent. Using this signal enhanced SPR immunosensor, rDer f1 in HBS-EP buffer and FBS was detected at a concentration of 15.4 and 32.1 ng/ml, respectively. The result demonstrates that SPR biosensor is a simple and reliable method for allergen detection.     

The fabrication of functional biosurface composed of iron storage protein, ferritin

A functional biosurface applicable to a biomemory device was fabricated using ferritin, which is one of the globular protein complexes consisting of 24 protein subunits, which can be classified as metalloproteins. For the fabrication of uniform ferritin layer, 11-MUA(11-mercaptoundecanoic acid) was used as a linker material. The formation of the ferritin layer was confirmed by surface plasmon resonance (SPR) spectroscopy, and the morphology of the immobilized ferritin was analyzed by scanning tunneling microscopy (STM). The electrochemical redox property investigation was accomplished by the cyclic voltammetry (CV) technique. These results of adsorbed ferritin on the modified electrode can be used for the fabrication of bioelectronics.     

A spectral imaging array biosensor and its application in detection of leukemia cell

A new type of array immunosensor was developed by combining surface plasmon resonance (SPR) and spectral imaging techniques. The system consisted of a monochromator as the wavelength scanning light source, a polarizer, Kretschmann-Raaether attenuated total reflection (ATR) configuration including array sensor chip, and a CCD camera. The images of transmitting light from ATR were recorded versus the wavelength. By averaging gray scales of the pixels in the area of every gold spot from the image series, the complete spectral resonance curve of all sensing spots on the array can be extracted in parallel. The performance of the developed system was evaluated by analyzing interactions of the anti-CD33 monoclonal antibody to its target leukemic cells using 11 cases of human bone marrow specimens. The specimens were also analyzed with flow cytometry method (FCM) for comparison. The initial results measured by the immunosensor array were corresponded with that of FCM, indicating that the developed parallel method might be clinically suitable for immunophenotyping of acute leukemias. The new sensor array system showed the merits of high-throughput, high sensitivity, high specificity, label free and operation convenient. Spots numbers of the array could be increased if suitable technology were adopted for manipulating the micro bio-liquids on the sensor array chip.     

利用SPR生物传感器检测缺血修饰白蛋白

缺血修饰白蛋白(IMA)的检测对心肌缺血的早期诊断和治疗具有重要意义。利用纳米金颗粒和混合巯基自组装于金膜表面上,研制了一种快速检测IMA的表面等离子体共振(SPR)生物传感器。同时比较了直接法和抑制法的检测下限。结果表明:直接检测法可以检测到393ng/L的IMA,而抑制检测法检测限小于5.0 ng/L。与现有的IMA检测方法相比,SPR生物传感器具有特异性好、检测下限低以及检测耗时短等优点。     

Two‐ and three‐dimensional transition element families for adaptive refinement analysis of elasticity problems

In this paper, new enhanced assumed strain (EAS) and hybrid stress transition element families are developed for 2D and 3D adaptive refinement analysis of elasticity problems. The EAS element families are based on some existing incompatible transition element families. By using the EAS method and the previous incompatible modes, the B ‐matrix columns associated with the EAS modes can be directly designed such that their domain integrals vanish automatically and they can be computed more efficiently. For 2D hybrid stress transition element families, it is possible to derive different stress fields that lead to rank‐sufficient transition elements. However, the task becomes intractable for 3D hybrid stress transition elements in which many combinations of mid‐side and mid‐face nodes are possible. This paper proposes to use hybrid stress transition element families in which the assumed stress fields are linearly complete. The new 2D element family is more accurate than the 2D rank‐sufficient element family. The new 3D element family is more accurate than the one with additional bilinear stress modes. Numerical examples reveal that the most accurate transition element families are the newly developed hybrid stress families followed by the EAS families, the incompatible families and then the compatible families. Copyright © 2008 John Wiley & Sons, Ltd.     

Ag-TiO2薄膜表面等离子体共振光谱特性研究

以拓宽Ag膜波长调制型表面等离子体共振(SPR)传感器的工作波长区间,将TiO2膜沉积于Ag膜表面制成Ag-TiO2复合薄膜.利用数值计算方法对不同厚度Ag膜和As-TiO2复合膜波长调制型SPR光谱特性进行仿真研究.仿真结果表明:共振吸收峰显著依赖于Ag膜厚度;当保持Ag-TiO2复合膜厚度60 nm时,复合薄膜SPR波长随TiO2厚度的增大而向长波长方向移动,发现红移;与60 nm厚Ag膜共振波长相比,12 nm厚TiO2与48 rnm厚Ag组成的复合膜共振波长红移超过200 nm.