基于软件校准的短波发射机功率控制系统设计

短波发射机功率稳定一直是通信领域致力改善的重点问题,短波发射机功率不稳定会直接影响无线电通信质量,造成通信失真、表达不清晰等问题。针对上述问题,基于软件校准设计短波发射机功率控制系统。该系统借鉴MVC设计模式搭建系统数据库层、业务逻辑层、控制层以及界面显示层基础框架；将功率计与短波发射机相连,实时采集工作状态下的短波发射机功率数据,通过信号处理器实施处理后并存储,借鉴传输元件,将数据发送到控制器,通过控制器校准短波发射机功率与预期之间的偏差,以偏差量为输入,利用改进PID运算得出控制量,生成控制命令,通过输入输出信号接口板输出命令,控制驱动装置调节短波发射机运行参数,实现功率控制。结果表明：与 控制系统、自动调谐系统应用相比较,在所设计系统应用控制下,100s内短波发射机的功率变化曲线与预期曲线之间的拟合优度指数更大,更接近1,优于对比系统,说明相比于对比系统。本系统控制表现更好,更能维持短波发射机功率稳定,达到了研究目标。     

直角坐标在软件开发中的应用研究

为简化不同软件开发技术处理界面中组件关系的算法,增强使用数学模型解决软件开发中算法设计的能力,全面分析和总结直角坐标系在界面设计中的应用十分必要。通过对不同开发技术处理界面设计的分析,界面中组件位置关系实质上都可以转化为坐标关系的计算。本文列举了直角坐标系在Python编程、Android编程、Java编程和Unity编程中的应用,以期给相应的算法设计提供借鉴思路。     

基于哈希链的软件定义网络路径安全

针对软件定义网络中，控制器无法保证下发的网络策略能够在转发设备上得到正确执行的安全问题，提出一种新的转发路径监控安全方案。首先以控制器的全局视图能力为基础，设计了基于OpenFlow协议的路径凭据交互处理机制；然后采用哈希链和消息验证码作为生成和处理转发路径凭据信息的关键技术；最后在此基础上，对Ryu控制器和Open vSwitch开源交换机进行深度优化，添加相应处理流程，建立轻量级的路径安全机制。测试结果表明，该机制能够有效保证数据转发路径安全，吞吐量消耗比SDN数据层可信转发方案（SDNsec）降低20%以上，更适用于路径复杂的网络环境，但时延和CPU使用率的浮动超过15%，有待进一步优化。     

Augmented context-based recommendation service framework using knowledge over the Linked Open Data cloud

This research proposes ACARDS (Augmented-Context bAsed RecommenDation Service) framework that is able to utilize knowledge over the Linked Open Data (LOD) cloud to recommend context-based services to users. To improve the level of user satisfaction with the result of the recommendation, the ACARDS framework implements a novel recommendation algorithm that can utilize the knowledge over the LOD cloud. In addition, the noble algorithm is able to use new concepts like the enriched tags and the augmented tags that originate from the hashtags on the SNSs materials. These tags are utilized to recommend the most appropriate services in the user’s context, which can change dynamically. Last but not least, the ACARDS framework implements the context-based reshaping algorithm on the augmented tag cloud. In the reshaping process, the ACARDS framework can recommend the highly receptive services in the users’ context and their preferences. To evaluate the performance of the ACARDS framework, we conduct four kinds of experiments using the Instagram materials and the LOD cloud. As a result, we proved that the ACARDS framework contributes to increasing the query efficiency by reducing the search space and improving the user satisfaction on the recommended services.     

基于组合双向拍卖的云资源调度方法

针对跨数据中心的资源调度问题，提出了一种基于组合双向拍卖（PCDA）的资源调度方案。首先，将云资源拍卖分为三个部分：云用户代理报价、云资源提供商要价、拍卖代理组织拍卖；其次，在定义用户的优先级及任务紧迫度的基础上，在拍卖过程中估算每一个工作发生的服务等级协议（SLA）违规并以此计算云提供商的收益，同时每轮竞拍允许成交多项交易；最终达到根据用户等级合理分配云资源调度的效果。仿真实验结果表明该算法保证了竞拍成功率，与传统一次拍卖成交一项的组合双向拍卖方案相比，PCDA在竞拍时间段产生的能耗降低了35.00%，拍卖云提供商的利润提高了约38.84%。     

Service composition for generic service graphs

Service composition is a promising approach to multimedia service provisioning, due to its ability to dynamically produce new multimedia content, and to customize the content for individual client devices. Previous research work has addressed various aspects of service composition such as composibility, QoS-awareness, and load balancing. However, most of the work has focused on applications where data flow from a single source is processed by intermediate services and then delivered to a single destination. In this paper, we address the service composition problem for multimedia services that can be modeled as directed acyclic graphs (DAGs). We formally define the problem and prove its NP hardness. We also design a heuristic algorithm to solve the problem. Our simulation results show that the algorithm is effective at finding low-cost composition solutions, and can trade off computation overhead for better results. When compared with a hop-by-hop approach for service composition, our algorithm can find composition solutions that aress 10% smaller in cost, even when the hop-by-hop approach uses exhaustive searches.     

继电器微机检测装置的软件设计

继电器作为主要电气元件之一，广泛应用于各个领域。对继电器的检测主要包括机械参数和电气参数的检测。电气参数由于其项目多，实现微机测试比较困难，据此，开发了电磁继电器电参数的自动测试装置，本文仅介绍其软件设计。     

交流伺服系统在玻璃裂片机中的应用

随着运动控制技术的飞速发展，交流伺服系统应用的日益广泛。介绍了液晶生产中的关键设备玻璃裂片机，并详细分析松下MINAS A系列交流伺服系统在玻璃裂片机中的应用。     

A call admission and rate control scheme for multimedia support over IEEE 802.11 wireless LANs

Quality of service (QoS) support for multimedia services in the IEEE 802.11 wireless LAN is an important issue for such WLANs to become a viable wireless access to the Internet. In this paper, we endeavor to propose a practical scheme to achieve this goal without changing the channel access mechanism. To this end, a novel call admission and rate control (CARC) scheme is proposed. The key idea of this scheme is to regulate the arriving traffic of the WLAN such that the network can work at an optimal point. We first show that the channel busyness ratio is a good indicator of the network status in the sense that it is easy to obtain and can accurately and timely represent channel utilization. Then we propose two algorithms based on the channel busyness ratio. The call admission control algorithm is used to regulate the admission of real-time or streaming traffic and the rate control algorithm to control the transmission rate of best effort traffic. As a result, the real-time or streaming traffic is supported with statistical QoS guarantees and the best effort traffic can fully utilize the residual channel capacity left by the real-time and streaming traffic. In addition, the rate control algorithm itself provides a solution that could be used above the media access mechanism to approach the maximal theoretical channel utilization. A comprehensive simulation study in ns-2 has verified the performance of our proposed CARC scheme, showing that the original 802.11 DCF protocol can statically support strict QoS requirements, such as those required by voice over IP or streaming video, and at the same time, achieve a high channel utilization. Hongqiang Zhai received the B.E. and M.E. degrees in electrical engineering from Tsinghua University, Beijing, China, in July 1999 and January 2002 respectively. He worked as a research intern in Bell Labs Research China from June 2001 to December 2001, and in Microsoft Research Asia from January 2002 to July 2002. Currently he is pursuing the PhD degree in the Department of Electrical and Computer Engineering, University of Florida. He is a student member of IEEE. Xiang Chen received the B.E. and M.E. degrees in electrical engineering from Shanghai Jiao Tong University, Shanghai, China, in 1997 and 2000, respectively, and the Ph.D. degree in electrical and computer engineering from the University of Florida, Gainesville, in 2005. He is currently a Senior Research Engineer at Motorola Labs, Arlington Heights, IL. His research interests include resource management, medium access control, and quality of service (QoS) in wireless networks. He is a Member of Tau Beta Pi and a student member of IEEE. Yuguang Fang received a Ph.D degree in Systems and Control Engineering from Case Western Reserve University in January 1994, and a Ph.D degree in Electrical Engineering from Boston University in May 1997. From June 1997 to July 1998, he was a Visiting Assistant Professor in Department of Electrical Engineering at the University of Texas at Dallas. From July 1998 to May 2000, he was an Assistant Professor in the Department of Electrical and Computer Engineering at New Jersey Institute of Technology. In May 2000, he joined the Department of Electrical and Computer Engineering at University of Florida where he got the early promotion with tenure in August 2003 and has been an Associate Professor since then. He has published over one hundred (100) papers in refereed professional journals and conferences. He received the National Science Foundation Faculty Early Career Award in 2001 and the Office of Naval Research Young Investigator Award in 2002. He is currently serving as an Editor for many journals including IEEE Transactions on Communications, IEEE Transactions on Wireless Communications, IEEE Transactions on Mobile Computing, and ACM Wireless Networks. He is also actively participating in conference organization such as the Program Vice-Chair for IEEE INFOCOM’2005, Program Co-Chair for the Global Internet and Next Generation Networks Symposium in IEEE Globecom’2004 and the Program Vice Chair for 2000 IEEE Wireless Communications and Networking Conference (WCNC’2000).     

浅谈应用标准进行软件测试

国家标准GB T175 44规定了软件包的质量要求及针对这些要求如何对软件包进行测试的细则。质量要求从产品描述、用户文档、程序及数据三个方面进行了规定 ,测试细则依据这些规定制定。ISO IEC912 6 (1991)版由ISO IEC 912 6 (软件产品质量 )和ISO IEC14 5 98(软件产品评测 )两个标准代替 ,ISO IEC912 6表述了软件产品质量的内部质量、外部质量和使用中的质量 ,规定了内部质量、外部质量的六个质量特性 ,并细分为 2 1个子特性 ,使用中的质量规定了四个使用质量特性 ,使用质量是指六个软件产品质量特性的综合效果。进行软件测试时 ,可以依据GB T175 44中的规定组织测试过程再结合ISO IEC912 6中的质量特性及子特性的规定确定测试需求的内容和测试的重点 ,利用ISO IEC912 6质量的规定建立质量评级的标准。