Synthesis of Hollow Three-Dimensional Channels LiNi_(0.5)Mn_(1.5)O_4 Microsphere by PEO Soft Template Assisted with Solvothermal Method

A appropriate size with three-dimension(3 D) channels for lithium diffusion plays an important role in constructing highperforming LiNi_(0.5)Mn_(1.5)O_4(LNMO) cathode materials, as it can not only reduce the transport path of lithium ions and electrons, but also reduce the side effects and withstand the structural strain in the process of repetitive Li~+ intercalation/deintercalation. In this work, an e fficient method for designing the hollow LNMO microsphere with 3 D channels structure by using polyethylene oxide(PEO) as soft template agent assisted solvothermal method is proposed. Experimental results indicate that PEO can make the reagents mingle evenly and nucleate slowly in the solvothermal process, thus obtaining a homogeneous distribution of carbonate precursors. In the final LNMO products, the hollow 3 D channels structure obtained by the decomposition of PEO and carbonate precursor in the calcination can provide abundant electroactive zones and electron/ion transport paths during the charge/discharge process, which benefits to improve the cycling performance and rate capability. The LNMO prepared by adding 1 g PEO possesses the most outstanding electrochemical performance, which presented an excellent discharge capacity of 143.1 mAh g~(-1) at 0.1 C and with a capacity retention of 92.2% after 100 cycles at 1 C. The superior performance attributed to the 3 D channels structure of hollow microspheres, which provide uninterrupted conductive systems and therefore achieve the stable transfer for electron/ion.     

Porous agarose/Gd-hydroxyapatite composite bone fillers with promoted osteogenesis and antibacterial activity

Artificial bone fillers are essentially required for repairing bone defects, and developing the fillers with synergistic biocompatibility and anti-bacterial activity persists as one of the critical challenges. In this work, a new agarose/gadolinium-doped hydroxyapatite filler with three-dimensional porous structures was fabricated. For the composite filler, agarose provides three-dimensional skeleton and endows porosity, workability, and high specific surface area, hydroxyapatite (HA) offers the biocompatibility, and the rare earth element gadolinium (Gd) acts as the antibacterial agent. X-ray photoelectron spectroscopy detection showed the doping of Gd in HA lattice with the formation of Gd-HA interstitial solid solution. Attenuated total reflection Fourier transform infrared spectroscopy imaging suggested chemical interactions between agarose and Gd-HA, and the physical structure of agarose was tuned by the Gd-doped HA. Cytotoxicity testing and alizarin red staining experiments using mouse pro-osteoblasts (MC3T3-E1) revealed remarkable bioactivity and osteogenic properties of the composite fillers, and proliferation and growth rates of the cells increased in proportion to Gd content in the composites. Antibacterial testing using the gram-positive bacteria S. aureus and the gram-negative bacteria E. coli indicated promising antibacterial properties of the fillers. Meanwhile, the antibacterial properties of composite filles were enhanced with the increase of Gd content. The antibacterial fillers with porous structure and excellent physicomechanical properties show inspiring potential for bone defect repair.     

道在山林，周弥六合——浙东天台山“洞天福地”的山岳景观流变及文化意象研究

道教洞天福地作为中国名山风景的经典类型之一，在宗教山岳景观中占据独特地位。浙东天台山水神秀，历代高道以入山隐修为主要目的，形成了道教在区域山林的景观文化基础。从天台山“神仙之乡”的文化背景出发，从“想象与实践”的视角切入，梳理了天台山洞天福地的景观流变：分析其“不死之福庭”地域性景观的形成经历了“赤城→桐柏”的信仰转移过程；以天台山为坐标，洞天福地格局打破了区域“层级”分布特征，而呈现大范围“州郡”空间格局。作为“联结点”的天台山，洞天世界沟通了宇宙、山、人3个基本场域，由此衍生出“洞宫”式和“周回”式山岳空间营建典范。旨在挖掘洞天福地中典型案例的价值，为中国洞天福地体系的构建提供理论依据。     

中国菊花主题花展及其对行业发展的作用

中国的菊花主题花展(菊花展览)是最重要的赏菊形式,对我国3种主要类型的菊花展览,即综合性菊花展览(中国菊花展览会、国际博览会菊花专项展和各级城市菊花展)、菊花专类园和菊花花田花海的发展现状进行了研究,并分析了菊花展览在促进菊花产业发展、弘扬菊花文化、服务生态文明及美丽乡村建设、加强菊花非物质文化遗产保护中的重要作用,为推动我国菊花展览水平的提高提供借鉴。     

Performance investigation on a novel 3D wave flow channel design for PEMFC

Flow field structure can largely determine the output performance of Polymer electrolyte membrane fuel cell. Excellent channel configuration accelerates electrochemical reactions in the catalytic layer, effectively avoiding flooding on the cathode side. In present study, a three-dimensional, multi-phase model of PEMFC with a 3D wave flow channel is established. CFD method is applied to optimize the geometry constructions of three-dimensional wave flow channels. The results reveal that 3D wave flow channel is overall better than straight channel in promoting reactant gases transport, removing liquid water accumulated in microporous layer and avoiding thermal stress concentration in the membrane. Moreover, results show the optimal flow channel minimum depth and wave length of the 3D wave flow channel are 0.45 mm and 2 mm, respectively. Due to the periodic geometric characteristics of the wave channel, the convective mass transfer is introduced, improving gas flow rate in through-plane direction. Furthermore, when the cell output voltage is 0.4 V, the current density in the novel channel is 23.8% higher than that of conventional channel.     

An approach to measure infill matric suction of irregular infilled rock joints under constant normal stiffness shearing

Rock joints infilled with sediments can strongly influence the strength of rock mass. As infilled joints often exist under unsaturated condition, this study investigated the influence of matric suction of infill on the overall joint shear strength. A novel technique that allows direct measurement of matric suction of infill using high capacity tensiometers (HCTs) during direct shear of infilled joints under constant normal stiffness (CNS) is described. The CNS apparatus was modified to accommodate the HCT and the procedure is explained in detail. Joint specimens were simulated by gypsum plaster using three-dimensional (3D) printed surface moulds, and filled with kaolin and sand mixture prepared at different water contents. Shear behaviours of both planar infilled joints and rough joints having joint roughness coefficients (JRCs) of 8–10 and 18–20 with the ratios of infill thickness to asperity height (t/a) equal to 0.5 were investigated. Matric suction shows predominantly unimodal behaviour during shearing of both planar and rough joints, which is closely associated with the variation of unloading rate and volumetric changes of the infill material. As expected, two-peak behaviour was observed for the rough joints and both peaks increased with the increase of infill matric suction. The results suggest that the contribution of matric suction of infill on the joint peak normalised shear stress is relatively independent of the joint roughness.     

Role of Co in formation of Ni-Ti clusters in maraging stainless steel

The effect of Co addition on the formation of Ni-Ti clusters in maraging stainless steel was studied by three dimensional atom probe (3DAP) and first-principles calculation. The cluster analysis based on the maximum separation approach showed an increase in size but a decrease in density of Ni-Ti clusters with increasing the Co content. The first-principles calculation indicated weaker Co-Ni (Co-Ti) interactions than Co-Ti (Fe-Ti) interactions, which should be the essential reason for the change of distribution characteristics of Ni-Ti clusters in bcc Fe caused by Co addition.     

Real-Time Three-Dimensional Occupancy Grid Modeling for the Detection and Tracking of Construction Resources

Awareness of the construction environment can be improved by automatic three-dimensional (3D) sensing and modeling of job sites in real time. Commercially available 3D modeling approaches based on range scanning techniques are capable of modeling static objects only, and thus cannot model dynamic objects in real time in an environment comprised of moving humans, equipment, and materials. Emerging prototype video range cameras offer an alternative by facilitating affordable, wide field of view, dynamic object tracking at frame rates better than 1?Hz (real time). This paper describes a methodology to model, detect, and track the position of static and moving objects in real time, based on data obtained from video range cameras. Experiments with this technology have produced results that indicate that video rate 3D data acquisition and analysis of construction environments can support effective modeling, detection, and tracking of project resources. This approach to job site awareness has inherent value and broad application. In combination with effective management practices and other sensing techniques, this technology has the potential to significantly improve safety on construction job sites.     

土工植草网在城防工程中的应用

文章以双辽市城防工程建设为例,介绍土工植草网新材料在护坡工程中的应用方法.     

Valley floor landscape change following almost 100 years of flood embankment abandonment on a wandering gravel‐bed river

Critical to restoring the nature conservation value of many river corridors is an understanding of how alluvial landscapes will respond to cessation of river management and land use practices that have previously degraded the environment. This paper analyses changes in valley floor landforms and vegetation patch dynamics, in relation to fluvial disturbance, over a period of almost 100 years following flood embankment abandonment on a wandering gravel‐bed river, namely the River Tummel, Scotland. Such rivers were once typical of many draining upland areas of northern maritime Europe. Prior to abandonment the valley floor landscape was agriculturally dominated and the river for the most part was single thread confined between flood embankments. The pattern of landform change and vegetation patch development over time following a decision in 1903 not to maintain embankments was tracked by geomorphic and land cover mapping utilizing successive sets of aerial photography for the period 1946 to 1994. A historical context for these changes was also feasible because the channel planform in 1900 and earlier channel planform changes dating back to 1753 were known due to the availability of old maps and earlier geomorphic studies. The land cover mapping was validated by comparison of results produced from the interpretation work on the 1994 aerial photographs with the field‐based UK National Vegetation Classification protocol. The findings of the study illustrate that bordering the River Tummel fluvial landforms and vegetation patch mosaics, presumably resembling those that occurred before valley floor land use intensification, evolved in less than 50 years after flood embankment abandonment with a resultant increase in habitat diversity. The change relates primarily to flood‐induced channel planform change and moderate levels of fluvial disturbance. The general significance of this change to plant species diversity on the valley floor of the River Tummel and elsewhere is discussed as is possible implications of the upstream impoundment and scenarios for climatically induced changes in flood frequency and magnitude. The overall outcome is the strong possibility that simple changes in river management and land use practices could result in re‐establishment of the nature conservation value of similar river corridors in Europe over the medium term without active restoration efforts. Copyright © 2002 John Wiley & Sons, Ltd.