Industrial sugar beets to biofuel: Field to fuel production system and cost estimates

Specialized varieties of sugar beets (Beta vulgaris L.) may be an eligible feedstock for advanced biofuel designation under the USA Energy Independence and Security Act of 2007. These non-food industrial beets could double ethanol production per hectare compared to alternative feedstocks. A mixed-integer mathematical programming model was constructed to determine the breakeven price of ethanol produced from industrial beets, and to determine the optimal size and biorefinery location. The model, based on limited field data, evaluates Southern Plains beet production in a 3-year crop rotation, and beet harvest, transportation, and processing. The optimal strategy depends critically on several assumptions including a just-in-time harvest and delivery system that remains to be tested in field trials. Based on a wet beet to ethanol conversion rate of 110 dm³ Mg⁻¹ and capital cost of 128 M$ for a 152 dam³ y⁻¹ biorefinery, the estimated breakeven ethanol price was 507 $ m⁻³. The average breakeven production cost of corn (Zea mays L.) grain ethanol ranged from 430 to 552 $ m⁻³ based on average net corn feedstock cost of 254 and 396 $ m⁻³ in 2014 and 2013, respectively. The estimated net beet ethanol delivered cost of 207 $ m⁻³ was lower than the average net corn feedstock cost of 254–396$ m⁻³ in 2013 and 2014. If for a mature industry, the cost to process beets was equal to the cost to process corn, the beet breakeven ethanol price would be $387 m^-3 (587 $ m⁻³ gasoline equivalent).     

Inhibition of Spore Germination of Phakopsora Pachyrhizi Using Crude Extracts of Amaranthus Spinosus

The effectiveness of methanolic and n-hexane crude extracts of Amaranthus spinosus to inhibit the spore germination of Phakopsora pachyrhizi, a causal agent of soybean rust disease was studied. Both methanolic and n-hexane crude extracts inhibited spore germination at concentrations of 0.1% to 5.0%. Methanolic extract of the roots at a concentration of 2.5% inhibited 55% of spore germination, and this result was similar when higher concentration at 5% of methanolic and n-hexane extracts of the flowers was used. The presence of alkaloids, flavonoids, tannins, saponins, and terpenoids in the extract may be responsible for the inhibition. The extract was potential to be utilized as a botanical fungicide.     

特征X射线能谱法测定Fe^＋注入小麦种子的深度

用１１０ｋｅＶ Ｆｅ＾＋离子束垂直注入小麦种胚后，在扫描电子显微镜上沿种子纵沟剖面，在不同深度上测量Ｆｅ元素被激发出的特征Ｘ射线强度分布，结果表明分布呈指数衰减，与晶体中的热扩散分布相类似，并对此进行了讨论。     

The amylose and lipid contents,dimensions, and gelatinisation characteristics of some wheat starches and their A- and B-granule fractions

Starches isolated from 23 bread wheats (Triticum aestivum) and 26 durum wheats (T. durum) contained 26.3-30.6% (mean 29.1%) total amylose, 19.3–25.1% (mean 22.9%) apparent amylose and 783–1144mg 100g^?1 (mean 977 mg 100g^?1) lysophos-pholipids. Gelatinisation temperatures were 57.3–64.9°C (mean 61.8°C) and enthalpies 6.4–11.8 Jg^?1 (mean 9.7Jg^?1) in excess water, measured by differential scanning calorimetry. There were no correlations between any of these parameters. Starch granule size distributions were determined with a Coulter Counter and 100–channel analyser. A-granule mean volumes were 1235–2585μm³ (av. 1778), modal volumes 863–1804μm³ (av. 1264), mean diameters 13.9–16.0μm (av. 13.99), and specific surface areas 0.236–0.302m²g^?1. B-granule mean volumes were 35.4–100.4μm³ (av. 55.9), modal volumes 16.5–54.5μm³ (av. 27.7), mean diameters 3.66–5.07μm (av. 4.09), and specific surface areas 0.684–0.920m²g^?1. The B-granule contents of the starches were 12.8–34.6% (av. 27.3) by weight (sedimentation method) and 13.0–37.3% (av. 24.0) by volume (Coulter method), the latter being the more accurate method.     

Simulation of Temperature Distribution in Stored Wheat without Aeration

A neural-deterministic simulation model applied for calculating distributions of temperatures and moisture content in a bed of wheat stored in a steel silo without aeration is presented in the article. The model consists of differential equations of heat and moisture transfer, initial and boundary conditions, and three artificial neural networks used during simulated ambient air conditions. Experiments and computer simulations were carried out in order to determine temperature fields in wheat grain stored in a steel silo for two months. The computer simulations were carried using MATLAB and FEMLAB software. The difference between measured and simulated temperature in grain near the silo wall at a height of 2.5 m from the bottom was less than 3.0°C. On the basis of the analysis performed it was concluded that the temperature distributions obtained with the model were consistent with the measured results obtained for grain stored in a steel silo without aeration.     

关于成都膨胀土地区边坡稳定性的探讨

成都市三环路建设中 ,膨胀土边坡稳定性研究是大家关心的重要课题。膨胀土边坡土体中的吸力变化直接影响到其稳定性 ,参照“人工神经网络技术”中的吸力经验公式 ,以三环路东一B标段的路堤边坡为例 ,采用“条分法”进行预测分析 ,并有针对性地进行防护处理取得了较好的效果。     

除油剂除锈剂发黑剂的进展

从逐渐不采用强酸碱的角度回顾了除油、除锈、发黑及电镀等技术近年的进展情况,介绍和评价了这类技术涉及的一些市售商品,提出了进一步推广应用这些材料必须解决的问题。     

The mechanical property and phase structures of wheat proteins/polyvinyl alcohol blends studied by high-resolution solid-state NMR

The phase structures of thermally processed wheat proteins (WP) and polyvinyl alcohol (PVOH) blends were studied by solid-state high-resolution NMR spectroscopy. The intermolecular interactions among the multi-component systems and the behavior of each component in the blends on scales of nanometers were examined. The mechanical properties of the blends were also measured and related to the phase structure studies. The results indicated that the polymer chains of WP could be homogeneously mobilized when thermally processed with glycerol and water as plasticisers, but the glycerol predominately associated with WP rather than PVOH in the blends. The intermolecular hydrogen bonding interactions between WP and PVOH caused some extent of miscibility in the system on scales of nanometers especially when the PVOH content was low. The tensile strength and modulus of the blends were improved as compared to WP. However, the intermolecular interactions were relatively weak and could not be further enhanced by increasing PVOH component in the blends. The particle miscible WP/PVOH blends contained plasticised WP and PVOH phases in conjunction with the miscible WP/PVOH phase. Increasing the PVOH content in the blends did not result in an increase of the percentage of the miscible phase and the blends tented to be immiscible while the elongation of the blends was reduced when increasing the PVOH content in the blends.     

High-performance dispersant of coal–water slurry synthesized from wheat straw alkali lignin

Environmental concerns have stimulated interest in utilizing plant-derived materials in various industrial fields. The main objective of the present study was to synthesize a new type of high-performance lignin series dispersant of coal–water slurry (CWS) from wheat straw alkali lignin (WAL), and determine the affecting factors in the reaction and the application performance for CWS preparation. The experimental results showed that the inherent viscosity and the sulfonic group content of the modified wheat straw alkali lignin (MSL) are the key factors affecting its dispersing effect for CWS. In the reaction, the reactant mass concentration and the sulfonating agent amount were changed to obtain the MSL with different inherent viscosities and sulfonic group contents, and the MSL with intermediate inherent viscosity (6.0 ml/g) and higher sulfonic group content (1.80 mmol g^− 1) was found to have excellent dispersing effect for CWS. The MSL obtained from optimized process was used as dispersant for CWS preparation, the studies of the properties of CWS showed that MSL has similar dispersing effect with naphtalenesulfonate–formaldehyde condensate, and far better dispersing effect than lignosulphonate. Recently this kind of new dispersant has been applied in several power plants in China.     

伊陕斜坡气田压裂施工中泵压异常的技术对策

通过对鄂尔多斯盆地伊陕斜坡气田压裂施工中在工作液、设备配合正常的情况下出现泵压异常升高的原因分析,采用降低施工泵压的工艺技术对策,解决了该区块压裂施工中泵压异常升高而发生砂堵的难题,确保了现场压裂施工的顺利进行,达到了对气层改造的目的。