A Neural Network Approach for Signal Detection in Digital Communications

In this paper, we propose a new approach for signal detection in wireless digital communications based on the neural network with transient chaos and time-varying gain (NNTCTG), and give a concrete model of the signal detector after appropriate transformations and mappings. It is well known that the problem of the maximum likelihood signal detection can be described as a complex optimization problem that has so many local optima that conventional Hopfield-type neural networks fail to solve. By refraining from the serious local optima problem of Hopfield-type neural networks, the NNTCTG makes use of the time-varying parameters of the recurrent neural network to control the evolving behavior of the network so that the network undergoes the transition from chaotic behavior to gradient convergence. It has richer and more flexible dynamics rather than conventional neural networks only with point attractors, so that it can be expected to have much ability to search for globally optimal or near-optimal solutions. After going through a transiently inverse-bifurcation process, the NNTCTG can approach the global optimum or the neighborhood of global optimum of our problem. Simulation experiments have been performed to show the effectiveness and validation of the proposed neural network based method for the signal detection in digital communications.     

An automatic torque ripple compensation system for direct drive motors

A serious problem in motion control is the occurrence of torque ripple. Since a direct drive (DD) motor with a magnet rotor uses a rare-earth magnet, the torque ripple is more serious than that of conventional servomotors. This paper presents an auto-compensation of torque ripple using a software-implemented torque observer. The frequency and amplitude of torque ripple can be obtained in the controller by using the estimated torque from an observer, and the autonomous generation of a compensating current component for a torque ripple is possible. The proposed algorithm has been verified by experiments.     

Construction of a control system for disturbance rejection using a dual observer

A well‐known control system which can reduce the adverse effects of disturbances is a disturbance observer. However, in many cases of mechanical systems, system disturbances which do not satisfy the matching condition may be imposed. Therefore, it may be difficult to reduce the adverse effects of the disturbances by the traditional disturbance observer. In this paper, a method of control system synthesis for disturbance rejection using a dual observer is proposed. This method is based on the zeroing induced by the disturbance localization problem. This problem may be solved by dividing the state space into observable subspace and unobservable subspace. As compared with an H_∞ controller based on perfect observation, the usefulness of the proposed control system for disturbance rejection is demonstrated by numerical simulations for a two‐mass spring system. © 2002 Scripta Technica, Electr Eng Jpn, 138(4): 50–60, 2002; DOI 10.1002/eej.1138     

Bioprocess applications of model-based estimation techniques

The last decade has seen the development of a number of approaches for estimating those variables which are difficult to measure on-line in industrial process situations. Whilst a range of techniques is available, a common element is the use of process knowledge in the form of a system model. In the case of bioprocess systems, although a large range of models has been presented in the literature, their use in estimation schemes on an industrial scale has been limited. A number of reasons can be identified for their low level of utilisation. Of particular significance is the uncertainty which exists in quantifying system performance and the process-model mismatch which inevitably results. The level of ‘pre-defined model’ uncertainty, together with the knowledge gained during the course of the fermentation, serves to dictate estimator structure. The paper considers a range of estimation strategies and contrasts, through industrial applications, their performance characteristics and utility.     

Transient aspects of inner wall temperatures at different spatial positions in fluidized bed evaporators

In this work, the instantaneous data of inner wall temperatures obtained at given axial positions but for different heated tubes or at various axial positions but at the same heated tube in a tube-bank fluidized bed evaporator with a vapor–liquid–solid external natural circulation flow were analyzed by employing linear and nonlinear time series analysis methods, including correlation dimension and Kolmogorov entropy analyses besides time domain, power spectrum and autocorrelation analyses. It is found that nonlinear characteristics of the wall temperature time series vary with spatial position in the evaporator at given operation conditions, and thus the multi-phase flow boiling behavior. However, the signals obtained at given axial position but different heated tubes in the evaporator exhibit more similar nonlinear evolution behavior, and those measured in the same heated tube but at different axial heights in the evaporator undergo more distinct nonlinear dynamic behavior. Multi-scale phenomena in different spatial positions are also found and discussed. These transient aspects of inner wall temperatures are closely related to the average holdup of solid particles and motion of vapor bubbles in vapor–liquid–solid flow. These results can provide some valuable information on the system modeling and controlling from the point of view of nonlinearity.     

Positive state‐bounding observer for positive interval continuous‐time systems with time delay

This paper is concerned with the problem of positive observer synthesis for positive systems with both interval parameter uncertainties and time delay. Conventional observers may no longer be applicable for such kind of systems due to the positivity constraint on the observers, and they only provide an estimate of the system state in an asymptotic way. A pair of positive observers with state‐bounding feature is proposed to estimate the state of positive systems at all times in this paper. A necessary and sufficient condition for the existence of desired observers is first established, and the observer matrices can be obtained easily through the solutions of a set of linear matrix inequalities (LMIs). Then, to reduce the error signal between the system state and its estimates, an iterative LMI algorithm is developed to compute the optimized state‐bounding observer matrices. Finally, a numerical example is presented to show the effectiveness and applicability of the theoretical results. Copyright © 2011 John Wiley & Sons, Ltd.     

混沌信号的主要测量特性分析

初步分析了混沌信号(以Logistic为例)应用于测量中的主要特性。仿真分析了Logistic信号的频谱特性、相关特性、模糊函数。说明了混沌信号在具有较高的距离速度分辨力,同时具备强抗干扰性。对比分析了混沌码和伪随机码的多普勒容限能力。初步分析Logistic信号的抗干扰特性。     

HP nonlinear guidance law design based on smooth sliding mode control

To eliminate the perturbation of interceptor detection induced by aerodynamic heating,the head pursuit (HP) guidance law for three-dimensional interception was presented. The guidance law positioned the interceptor ahead of the target on its flight trajectory,and the speed of interceptor was required to be lower than that of the target. On the basis of a novel head pursuit three-dimensional guidance model,a nonlinear guidance law was developed based on smooth sliding mode control theory. At the same time,a special observer was designed to estimate the target acceleration,and a numerical example on maneuvering ballistic target interception verified the effectiveness of the presented guidance law.     

一种基于图像识别的高性能混沌特性判别算法

利用混沌阵子可以检测强噪声背景下极其微弱的周期信号。该方法应用中的关键问题是混沌特性的判别。提出了一种新的基于图像识别的混沌特性判别方法,该方法需要的存储量小,算法简单易行,尤其适合系统资源受限的场合,比如嵌入式系统。阐述了该混沌特性判别算法的原理,给出了一个基于此方法的完整判别程序流程。计算机仿真结果表明,该方法用于Duffing信号幅值检测系统是有效的。     

Second-order terminal sliding mode control for hypersonic vehicle in cruising flight with sliding mode disturbance observer

This paper focuses on the design of nonlinear robust controller and disturbance observer for the longitudinal dynamics of a hypersonic vehicle (HSV) in the presence of parameter uncertainties and external disturbances. First, by combining terminal sliding mode control (TSMC) and second-order sliding mode control (SOSMC) approach, the secondorder terminal sliding control (2TSMC) is proposed for the velocity and altitude tracking control of the HSV. The 2TSMC possesses the merits of both TSMC and SOSMC, which can provide fast convergence, continuous control law and hightracking precision. Then, in order to increase the robustness of the control system and improve the control performance, the sliding mode disturbance observer (SMDO) is presented. The closed-loop stability is analyzed using the Lyapunov technique. Finally, simulation results illustrate the effectiveness of the proposed method, as well as the improved overall performance over the conventional sliding mode control (SMC).