Influences of chip serration on micro-topography of machined surface in high-speed cutting

Saw-tooth chip changes from macroscopically continuous ribbon to separated segments with the increase of cutting speed. The aim of this study is to find the correlations between chip morphology and machined surface micro-topography at different chip serration stages encountered in high speed cutting. High strength alloy steel AerMet100 was employed in orthogonal cutting experiments to obtain chips at different serration stages and corresponding machined surfaces. The chips and machined surfaces obtained were then examined with optical microscope (OM), scanning electron microscope (SEM), and white light interferometer (WLI). The result shows that chip serration causes micro-waves on machined surface, which increases machined surface roughness. However, wave amplitudes (surface roughness) at different serration stages are different. The principal factor influencing wave amplitude is the thickness of the sawed segment (tooth) of saw-tooth chip. With cutting parameters in this study, surface roughness contributed by chip serration ranges from 0.39 μm to 1.85 μm. This may bring on serious problems in the case of trying to replace grinding with high-speed cutting in rough machining. Some suggestions have been proposed to control the chip serration-caused surface roughness in high-speed cutting based on the results of the current study.     

单片机控制下液晶显示器的使用

介绍液晶显示器EDM12864B的原理及其在单片机控制下的简单应用。     

AT89C51单片机在电话远程控制器中的应用

设计以AT89C51单片机作为控制核心的电话远程控制器,重点介绍该控制器的各模块组成、原理及具体实现的电路,该控制器采用现有的电话线路进行通信,无需重新布线且通信距离不受限制,经实际运行表明,该控制器具有运行可靠、成本低、操作方便,适用性强的特点、可以广泛应用于城市社区,具有较大的推广价值。     

用6805实现宽范围高精度频率测量

采用ＭＣ６８０５系列单片机并充分利用其定时器，选择测频法或测周法，可以实现定范围、高精度频率测量。此种方法只占用１个内部定时器，节省了硬件开销。     

编码解码芯片HD3-6408-9及其应用

编码解码芯片HD3 64 0 8 9是一种高性能的CMOS器件。这种大规模芯片主要由编码器和解码器两部分组成。在数据传输应用中 ,采用两个独立的单片机系统 ,利用编码解码芯片 (HD3 64 0 8 9)组成数字信号的接收、发送及显示部分来完成数据传输功能     

基于Lab VIEW的小型汽油机磁电机点火提前角的测量

本文介绍了磁电机点火系统的点火提前角测量原理。对点火系统的点火信号和触发信号进行采集、调理，再用单片机进行处理，最后用LabVIEW进行点火提前角数据存储和显示。     

MSP-G320240DBCW-211N大规模点阵式LCD与PIC单片机接口技术

介绍了大规模点阵式液晶显示器MSP-G320240DBCW-211N的特点及其与PIC18F6620单片机的接口技术，提出了应用过程中可能遇到的问题和解决方法．给出相关的C程序设计并在研制的智能光电检测仪器上得以成功地应用。     

测井数据实时采集与接口设计

介绍了一种采用改进型的ＣＬＳ３７００数控测井系统对微电阻率扫描仪数据采集与控制接口的设计及实现方法。基于ＣＬＳ３７００数控测井仪和ＦＭＳ仪采用８９Ｃ５１单片机设计出通信接口，解决了微电阻率方法。基于ＣＬＳ３７００数控测井仪和ＦＭＳ仪采用８９Ｃ５１单片机设备出通信接口电路，解决了微电阻主扫描仪现现场实时处理中的瓶颈问题。     

磷－溴双元素阻燃涤纶切片的研制

分析了磷－溴（Ｐ－Ｂｒ）阻燃剂的特性及阻燃机理。应用Ｐ－Ｂｒ阻燃剂进行了阻燃涤纶切片的开发研制试验，结果表明：Ｐ－Ｂｒ阻燃剂阻燃效果好、能高度分散并有良好的热稳定性，其所制阻燃涤纶切片有良好的可纺性。     

Enhanced Image Detection on an ARM based Embedded System

This paper presents a new technique for thedetection of Integrated Circuits within images of Printed Circuit Boards autonomouslyand without the need to be assisted by CAD data. The technique is a key partof a suite of algorithms targeted for an embedded System On Chip architecturebased on the ARM7 platform for real time detection of PCB images for diagnosticpurposes. The technique has a significant reduction in complexity when comparedto conventional approaches such as the Hough Transform. The reduction in complexitymakes the approach ideal for an embedded vision application suchas the one described in this paper. This paper presents the technique, thetarget embedded architecture and results showing the reduction in complexitywhen compared to a Hough Transform.