兼使水流转向的非对称窄缝挑坎

讨论了兼有水流转向功能的一级非对称直线边壁窄缝的设计方法与水力特性，两边墙转向角之差即为水流转向角，两边墙转角相等时出口水流的水深和佛汝德数也分别相等。按在窄缝出口前形成完整幅射流的条件，讨论了兼有转向功能的非对称曲线边墙窄缝的设计方法与水力特性。比较了六种体型(三种对称、三种非对称)窄缝在八种工况对泄槽底板的冲击压强，实测结果表明，非对称性越强冲击压强越小。     

Precision equipment for symmetrical bending— Part 1. The loading system

The design and performance of precision bending equipment for testing straight beams with constant rectangular section under a pure bending moment is described. Part 1 deals with the loading arrangements and Part 2 with the rig for measuring beam deflection. The methods for recording deflection of strain gauges applied on the beam have been described elsewhere.^1–4
The reactions to the deadweight gravity loads are taken via ball bearings. The total bending moment inaccuracy, i.e. the sum of estimated systematic errors and random errors, the latter expressed as the 2Ga confidence interval about the mean (2G_cim), is about ± 25 x. 10^-4%, for 23 tests with a steel beam with 15 mm × 75 mm cross sectional dimensions, loaded to 1-1.5 mm/m strain.
The measuring rig stands on the beam via hardened and polished spherical segment feet and uses a capacitive transducer system with less than 5nm resolution. Various application tasks are described. The total inaccuracy of the measured deflection, i.e. apart from bending moment inaccuracy, is about ± 35 times 10^4% for about 10 reproduced, not repeated, tests with the same steel beam. The deflection for such a beam is of the order of 2 to 4 mm.     

Aspects of rapid crack propagation in silicon

Fracture experiments with silicon specimens in recent years have shown the need for a new approach to the analysis of rapidly propagating cracks in single crystals. Behaviour and phenomena have been revealed that fracture in these materials is rather different from the fracture of both amorphous and polycrystalline materials. We show that continuum mechanics is insufficient for analyzing crack propagation in single crystals since it is unable to consider atomistic‐scale phenomena. Accordingly, we describe basic phenomena associated with rapid crack propagation in silicon : (i) anisotropic velocity‐dependent R‐curve behaviour, as a key phenomenon dictating atomistic scale behaviour, (ii) crack deflection from one cleavage plane to another as a mesoscopic scale phenomenon in single‐crystal fracture, (iii) the Rayleigh surface wave speed as the limiting crack tip velocity is re‐examined, (vi) the lowest crack velocity in brittle crystals is examined, and finally (v) the interaction between crack path and preferred cleavage planes in single crystals is depicted.     

在柔性变焦系统中的压力变焦镜

从理论上和实验上对水冷镜的镜面曲率半径随压力变化的规律作了研究。对压力变形后镜面相对于球面作了波像差分析，分析表明压力变焦镜用于中红外激光系统是合适的     

压电超声微电机混合结构定子的固有频率特性分析

压电超声微电机是依靠定子振动变换能的功率器件，定子性能将直接关系到微电机能否实现，本文采用Ｒａｙｌｅｉｇｈ－Ｒｉｔｚ方法来分析机械中经常采用的多层膜结构（混合结构）定子的固有振动特性，推导中考虑了平面应力和弯曲应力对固有频率的影响，模拟计算和实验结果符合得较好，此外还讨论了定子有关参数对固有频率的影响。     

非对称复合材料层板在面内载荷作用下的非线性横向变形或屈曲

本文利用广义富里叶级数法对非对称复合材料层板在面内载荷作用下的非线性横向变形或屈曲问题进行了分析。文中主要研究了四边简支边界条件下,非对称层板的铺层方式和面内载荷形式对横向变形的影响。通过求解非线性控制方程得到了层板的载荷—挠度曲线或特殊情况下的后屈曲平衡曲线。计算结果表明,对于大多数非对称复合材料层板在面内载荷作用下所产生的是横向变形问题,而不是分叉屈曲问题。     

钢结构稳定设计——理论与实践

本文提出了实际工程结构的非线性理论设计和分析方法(NIDA),并以澳门回归纪念馆的设计为例,展示了本方法的优越性.在设计过程中,设计者无需假设K系数和有效长度,在结构分析完成后便可迅速完成设计,因此本文提出的方法既经济又便利.尽管对于钢框架在往复荷载及动力荷载作用下的弹塑性大位移分析已经非常成熟,但本文的方法开创了结构的非线性分析及设计的新纪元,能够对现行的设计方法理论起到巨大的推动作用.     

新型PDC钻头的防斜打快效果及评价

大庆油田海拉尔地区的地层倾角大、岩屑录井荧光级别低,亟待解决满足岩屑录井要求的防斜打直问题。为了能够在获得足够大的岩屑颗粒和提高机械钻速的基础上达到防斜打直的目的,制定了采用大切削齿B425型PDC钻头配以小钟摆钻具组合的现场试验方案。试验表明:B425钻头与牙轮钻头所破碎的岩屑颗粒基本相当,能够满足地质岩屑录井的要求;与牙轮钻头相比,B425钻头显著地提高了机械钻速,降低了钻头费用,减少了起下钻次数;单只B425的进尺可达1000m以上,相当于2~3只牙轮钻头的进尺;采用PDC钻头配以小钟摆钻具组合,可以较好地解决防斜打直问题。此外,针对试验中遇到的问题,通过改进井身结构和调整钻井参数,形成了一套适合于海拉尔地区的防斜打快技术。     

Analytical prediction of composite beams response in fire situations

In this paper an extension of the method of the Fourier series expansion to the fire analysis of composite beams is presented. In particular the extension concerns the introduction of the temperature dependent interaction of all the components: steel beams, concrete slab and steel connectors. These last are considered of finite stiffness, and a proper account is given to the combined effect of thermal degradation of the properties, and stress amplification caused by the differential thermal expansion across the interface.The proposed method compares very well with some experimental fire tests of simply supported and framed composite beams. Due to its relative simplicity and speed, it can be used for design purposes in evaluating the critical temperature in terms of critical deflection. Finally we recall that the method is capable of dealing with every type of fastening distribution, such as discontinuous or variable length.     

激光束偏转法检测金属表面层的缺陷

本文编程计算了由激光光热应产业的金属表面的温度分布和泵浦光的调制频率、金属层厚度等的关系，预言检测浓度缺陷的能力。用激光光束偏转法检测到表面下不同深处的缺陷，并把面扫描幅值信号以三维象和灰度象显示。