继电保护中多路模拟量采集系统的设计

介绍了一种基于高性能浮点DSP芯片TMS320C32、CPLD芯片XC95288和A/D采样芯片AD976组成的多路采集系统的工作原理以及设计方法。通过对第一路施加特殊的电压量,在CCS开发环境下读取采样缓冲区的值,并利用Matlab对采样数据进行了全波傅氏变换。此外,该系统已在继电保护中得到广泛应用,实践表明,该系统能较好地解决多路模拟量的采集,并确保了采样数据的安全可靠性。     

乐滩灌区输水隧洞穿合山煤矿采空区处理设计

分析了乐滩灌区工程北干渠溯河隧洞段长约1.06 km穿合山煤矿采空区的地质情况.借鉴高速公路煤矿采空区的成功处理经验,通过科学分析,对采空区变形和区域内覆岩的稳定性做了评价,论述了输水线路穿采空区段采取全充填压力注浆法的工程处理方法.     

Control strategies for reactive batch distillation

A batch reactor may be combined directly with a distillation column by distilling off the light component product in order to increase the reactor temperature or to improve the product yield of an equilibrium reaction. The same amount of the light product should be removed as the amount being formed by the reaction at any time. A linearized model has been developed which describes the process behaviour satisfactorily for control analysis purposes. The controllability of a combined batch reactor/batch distillation column is found to depend strongly on the operating conditions and on the time during the run. In general, controlling only the reactor temperature (one-point bottom control) is difficult since the set-point has to be specified below a maximum value in order to avoid break-through of an intermediate component in the ditillate. This maximum value may be difficult to know a priori. For the example considered in this study, control of both reactor temperature and distillate composition (two-point control) is also found to be difficult due to large interactions in the column. As with one-point bottom control, the reactor temperature has to be specified below a maximum value. However, energy can be saved since the heat duty can be decreased with time. Controlling the temperature on a tray in the column (one-point column control) is found to give good performance for the given process with no loss of reactant and a high reactor temperature, although no direct control of the reactor temperature is obtained.     

3D velocity from 3D Doppler radial velocity

We present local least squares and regularization frameworks for computing 3D velocity (3D optical flow) from 3D radial velocity measured by a Doppler radar. We demonstrate the performance of our algorithms quantitatively on synthetic radial velocity data and qualitatively on real radial velocity data, obtained from the Doppler radar at Kurnell Radar station, Botany Bay, New South Wales, Australia. Radial velocity can be used to predict the future positions of storms in sequences of Doppler radar datasets.© 2005 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 15, 189–198, 2005     

欠驱动系统Pendubot的模糊控制策略

本文针对欠驱动Pendubot机器人系统，提出一种简单可靠的摇起及平衡控制策略。通过利用模糊控制及全状态反馈控制技术来分别设计摇起控制器及平衡控制器，其中模糊摇起控制器的设计使得系统的摇起可靠性得到大大的加强，并缩短了响应时间，两个控制器的转换通过转换装置实现。最后的仿真结果验证了算法的有效性。     

微米级冷轧带钢厚度控制系统

分析、讨论了冷轧应用的各种厚度控制的优缺点，介绍质量流量厚度控制原理和控制精度极高的微米级带钢厚控（μＡＧＣ）系统及其可能产生的经济效益。     

LED显示技术的现状和发展

综合介绍了ＬＥＤ显示技术的现状，详细叙述了全色ＬＥＤ显示的关键技术和主要性能，对ＬＥＤ在室内，室外的应用前景作出评述。     

加氢催化剂器外再生技术(HCRT)的开发与应用

淄博恒基化工有限公司开发的加氢催化剂器外再生技术 (HCRT) ,具有工艺合理、再生催化剂物性恢复好、活性损失少等特点 ,该技术已达到国外器外再生技术的水平。近年来已再生全国 19个炼油厂、2 3个品种的催化剂 12 95t,工业应用均取得满意结果     

3961连续重整催化剂性能考察

新一代高活性，高水热稳定性3961（PS－Ⅳ）型连续重整催化剂于1996年在上海石化芳烃厂400kt/a连续重整装置上首次进行工业应用试验。开工5a，催化剂跟踪分析结果表明，该剂保持了良好的物化性质和反应性能，表现为良好的比表面积稳定性和持氯能力，经过200个以上再生周期的催化剂未发现有明显的相变和金属分散度的变化。     

《华东电网500 kV变压器全过程管理技术规范>的实施要点

介绍了在执行《华东电网 5 0 0 k V变压器全过程管理技术规范》过程中 ,应强调管理是从基建到生产 ,从选型、安装到运行维护的全过程管理 ,重点介绍了变压器在订货过程中应高度重视诸如对于选用非强油循环的冷却方式、三相共体变压器、抗短路能力以及过励磁问题 ,也对变压器安装过程中水分控制、运行中气相色谱分析和局部放电试验要求作了简述