Understanding δ-Bi2O3 fluorite degradation mechanism and related solutions for promising applications in distributed multigeneration

Oxygen selective membrane on the base of cermet δ-Bi₂O₃/Ag with an interpenetrating structure has the maximum potential efficiency of air separation. However, the degradation processes, including the phase degradation of fluorite δ-Bi₂O₃, do not make it possible to create a membrane with the required perfection and durability. In this work, the ordering of oxygen vacancies with the transformation of fluorite into the rhombohedral phase (S.G. R-3) was studied by powder HT XRD in situ at 600 °C on dense Bi_0.78Er_0.2Hf_0.02O_1.51 ceramics. Fast regeneration of disordered fluorite occurs at T = 640–700 °C. The phase degradation of fluorite due to the segregation of dopants at the second stage leads into stable phases - sillenite, tetragonal or rhombohedral phase (S.G. R-3m), depending on the composition of δ-Bi₂O₃. Fast regeneration of fluorite occurs when heated to 820 °C, which is unacceptable for membranes. Analysis of all available data allows us to propose approaches to optimize the composition of δ-Bi₂O₃ and technical solutions for creating durable oxygen selective membranes with promising use in distributed multigeneration. As a result of the analysis, a new solid electrolyte with better parameters was obtained.     

子波变换理论及其在信号处理中的应用

子波分析的形成是傅里叶分析发展史上里程碑式的进展，子波分析优于傅里叶交换的地方在于它在时域和频域同时具有良好的局部化性质，从而可以把分析的重点聚焦到任意的细节，被人们誉为数学显微镜，成为近年来在工具和方法上的重大突破。本文将子波理论中的主要定理、结论、变换特性和一些重要概念加以综述，以促进子波理论的应用。本文的重点在于介绍多分辨率分析和子波分析及其实现、子波变换及其算法、子波和滤波器组等的重要内容，并介绍其在信号处理中的应用及研究动态。     

AHMED experiments on hygroscopic and inert aerosol behaviour in LWR containment conditions: experimental results

Hygroscopic NaOH, CsI, CsOH and inert Ag aerosol behaviour at different temperatures and relative humidities (RH) has been studied in a well instrumented and controlled vessel of 1.81 m³ total free volume. Homogeneous thermal-hydraulic conditions for aerosol measurement in the vessel were achieved. The aerosol number and mass concentration were measured continuously during the experiments using a Condensation Nucleus Counter and a Tapered Element Oscillating Microbalance. The particle size distribution and chemical composition in the test conditions were measured by Berner low pressure impactors. In the case of NaOH the half life of the aerosol mass concentration was more than four times longer at low RH (22%) as compared to high RH (96%). The half lives of the CsOH and CsI aerosols were only twice as long at low RH as compared to high RH. Thus at high RH (96–97%) the half lives of CsOH and CsI were twice as long as the half life for the NaOH aerosol. The faster decay of the NaOH aerosol is due to the smaller density decrease of NaOH during water condensation. CsOH particles grew rapidly to their equilibrium size at all humidities. The measured equilibrium size for CsOH aerosol agree well with the calculated particle size at different RHs. Experimental results were also compared with calculations obtained by severe accident computer codes. These calculated results will be presented in a later paper.     

几何位相非线性变化的实验研究

本文报道了Pancharatnam位相非线性变化的实验研究，实验结果与理论预言符合得很好。Pancharatnam位相的这种非线性可能在光开关中得到应用。     

Al-Cu-Fe QUASICRYSTALLINE PHASE FORMATION BY MECHANICAL ALLOYING

Al-Cu-Fe alloys were prepared from elemental powders in a high-energy planetary ball mill. A sequence of solid state reactions resulting in quasicrystal (QC) phase formation takes place during heating of the as-milled powder. These reactions were studied by both differential scanning calorimetry and x-ray diffraction methods. Mechanically alloyed powders were consolidated by cold and hot pressing, as well as by explosive compaction. After annealing at sufficiently high temperatures, the consolidated samples are single-phase QC, except the ones consolidated by explosion. The high reactivity of the as-milled alloys causes the appearance of high porosity of the consolidated samples after the annealing.     

A hybrid extended finite element/level set method for modeling phase transformations

A hybrid numerical method for modelling the evolution of sharp phase interfaces on fixed grids is presented. We focus attention on two‐dimensional solidification problems, where the temperature field evolves according to classical heat conduction in two subdomains separated by a moving freezing front. The enrichment strategies of the eXtended Finite Element Method (X‐FEM) are employed to represent the jump in the temperature gradient that governs the velocity of the phase boundary. A new approach with the X‐FEM is suggested for this class of problems whereby the partition of unity is constructed with C¹(Ω) polynomials and enriched with a C⁰(Ω) function. This approach leads to jumps in temperature gradient occurring only at the phase boundary, and is shown to significantly improve estimates for the front velocity. Temporal derivatives of the temperature field in the vicinity of the phase front are obtained with a projection that employs discontinuous enrichment. In conjunction with a finer finite difference grid, the Level Set method is used to represent the evolution of the phase interface. An iterative procedure is adopted to satisfy the constraints on the temperature field on the phase boundary. The robustness and utility of the method is demonstrated with several benchmark problems of phase transformation. Copyright © 2002 John Wiley & Sons, Ltd.     

An orthogonal basis for the hyperbolic hybrid polynomial space

Motivated by the wide usage of the Tchebyshev basis and Legendre basis in the algebra polynomial space, we construct an orthogonal basis with the properties of the H-Bézier basis in the hyperbolic hybrid polynomial space, which is similar to the Legendre basis and holds remarkable properties. Moreover, we derive the transformation matrices that map the H-Bézier basis and the orthogonal basis forms into each other. An example for approximating the degree reduction of the H- Bézier curves is sketched to illustrate the utility of the orthogonal basis.     

两种求解可靠指标的实用算法

介绍了基于几何原理求解可靠指标、寻找设计验算点的具有较高实用价值的两种新算法： 图解渐近法和Monte Carlo递进法。推导了由标准正态变量反算常用分布类型的随机变量数值的计算公式，并且通过采取某些改善措施，简化了计算过程，大大提高了问题的求解效率。同时，两种算法可以结合使用，经算例验证，能够快速解决问题且满足高精度要求，说明了本文方法的可行性和有效性。     

模糊自动机在电磁波识别中的应用

研制了一个模糊处理和神经网络相结合的自动机,使用模糊技术从未处理的电磁信号波纹图像中处理模糊几何特征属性,进行波纹分类与识别。当使用模糊自动机(FA)进行识别紊乱波纹时,这些模糊几何特征是最好的。而对这些模糊几何特征的辨识,使用FA是很好的。