中子平衡节块离散纵标法及CMFD加速技术研究

本文基于横向积分离散纵标方程,解析得到横向积分通量中出射通量与入射通量的关系,并根据类似于扩散方程节块展开法的输运节块中子平衡方程形式,得到了一种高效的节块离散纵标法数值迭代策略。数值结果表明,本文提出的方法可行且数值结果正确。此外,粗网有限差分(CMFD)加速技术在节块离散纵标法中也取得了非常好的应用效果。     

Laser induced fast ignition made realistic by relativistic velocities-dream or reality?

Due to the recent developments in high power lasers it is suggested to accelerate a micro-foil by the laser pressure to relativistic velocities. The time dependent velocity of this micro-foil is calculated analytically for pulsed constant laser intensity. The accelerated foil collides with a target creating a shock wave on impact. The shock wave parameters are calculated within the context of relativistic fluid dynamics.It is suggested to use the energy of the relativistic micro-foil to ignite a pre-compressed target with a density relevant for fusion ignition. The equations are written and solved for the collision between the micro-foil and the very dense target. The criteria for shock wave ignition and heat wave ignition are used to show that one needs significantly less laser energy for heat wave ignition.The present scheme shows that nuclear fast ignition by micro-foil impact could be attained in the near future with lasers that are currently under construction.     

Multi-resource scheduling for FPGA systems

In modern cloud data centers, reconfigurable devices (FPGAs) are used as an alternative to Graphics Processing Units to accelerate data-intensive computations (e.g., machine learning, image and signal processing). Currently, FPGAs are configured to execute fixed workloads, repeatedly over long periods of time. This conflicts with the needs, proper to cloud computing, to flexibly allocate different workloads and to offer the use of physical devices to multiple users. This raises the need for novel, efficient FPGA scheduling algorithms that can decide execution orders close to the optimum in a short time. In this context, we propose a novel scheduling heuristic where groups of tasks that execute together are interposed by hardware reconfigurations. Our contribution is based on gathering tasks around a high-latency task that hides the latency of tasks, within the same group, that run in parallel and have shorter latencies. We evaluated our solution on a benchmark of 37500 random workloads, synthesized from realistic designs (i.e., topology, resource occupancy). For this testbench, on average, our heuristic produces optimum makespan solutions in 47.4% of the cases. It produces acceptable solutions for moderately constrained systems (i.e., the deadline falls within 10% of the optimum makespan) in 90.1% of the cases.     

基于振动实测的非均质地层钻头失效分析与对策

四川盆地作为国内页岩气开发的重点区域,通过近几年的不断攻关和实践,机械钻速得到了提高,但由于受地层复杂、可钻性差、非均质性强等地质因素的影响,导致井下钻柱系统不良振动剧烈,容易出现钻头损坏严重、钻速较低等问题,严重影响了钻井时效。为了解决上述难题,以该盆地涪陵工区上二叠统龙潭组—中二叠统茅口组为例,采用井下振动高频测量工具的实测手段,测量了钻头—钻柱系统的动态振动加速度参数,结合地层的岩性和矿物组分分析,研究钻头失效原因与对策,并开展了现场试验。研究结果表明:①在非均质地层中钻进的钻头—钻柱系统产生了大于40 m/s~2的高幅值瞬时冲击振动,高幅值的瞬时冲击是导致钻头先期失效的主要原因;②提出了抑制高幅值的瞬时冲击振动采用"减振+增压"工具组合和避免井下工具共振的钻井参数;③采用钻井新参数的试验井比邻井的高幅值瞬时振动降低了17%,单只钻头进尺增加24%,钻头工作环境得到了较大的改善,钻头使用数量减少。结论认为,该研究成果能够有效地改善钻头—钻柱系统的振动状态,有利于达成延长钻头使用寿命的目标。     

动力环境集中监控系统可靠性的提高

为实现电源设备乃至通信机房的少人或无人值守和集中维护,必须建立一套完善的电信局动力环境集中监控系统。文中结合番禺区电信局的实际,讨论了提高系统运行可靠性的几点措施,包括硬件方面与软件方面的手段,关键在于加强系统的运行管理。     

对基于交换网络分层结构的软件无线电方案的改进

通过比较各种软件无线电结构的优缺点,针对既具有交换网络结构又具有分层结构优点的基于交换网络的分层无线电结构方案,提出了部分改进思想。     

Reconfigurable hardware implementation of a phase-correlation stereoalgorithm

This paper describes the implementation of a stereo-vision system using Field Programmable Gate Arrays (FPGAs). Reconfigurable hardware, including FPGAs, is an attractive platform for implementing vision algorithms due to its ability to exploit parallelism often found in these algorithms, and due to the speed with which applications can be developed as compared to hardware. The system outputs 8-bit, subpixel disparity estimates for 256× 360 pixel images at 30,fps. A local-weighted phase correlation algorithm for stereo disparity [Fleet, D. J.: {Int. Conf. Syst. Man Cybernetics 1:48–54 (1994)] is implemented. Despite the complexity of performing correlations on multiscale, multiorientation phase data, the system runs as much as 300 times faster in hardware than its software implementation. This paper describes the hardware platform used, the algorithm, and the issues encountered during its hardware implementation. Of particular interest is the implementation of multiscale, steerable filters, which are widely used in computer vision algorithms. Several trade-offs (reducing the number of filter orientations from three to two, using fixed-point computation, changing the location of one localized low-pass filter, and using L1 instead of L2 norms) were required to both fit the design into the available hardware and to achieve video-rate processing. Finally, results from the system are given both for synthetic data sets as well as several standard stereo-pair test images.     

单片机仿真系统

本文讨论单片机离线仿真系统的设计方法，其关键技术是：单片机硬件系统（ＲＡＭＲＥＧＩＳＴＥＲＳ）仿真，指令系统仿真，中断系统仿真，应用系统硬件仿真。     

真空冻干生产线模糊控制系统

介绍了采用模糊控制技术解决真空冻干生产线控制中大超调量、大滞后等问题的方法 ,详述了模糊控制系统的构成、主要功能和实现方法     

应用SPC技术对机械零件加工过程的管理和控制

介绍了SPC(统计过程控制)技术原理，以某传动轴外径φ45 0.50^0.90 mm为控制对象，提出应用SPC技术，对机械零件加工过程进行管理和控制，从而达到过程失控预警、过程不断改进、过程能力不断提高的目的，继而保证产品质量的稳定和不断提高。