30.4 nm光电成像系统分辨率的初步实验研究

本文基于微通道板MCP(Microchannel Plate)探测器件设计一套成像系统，用于对波长为30．4nm的极紫外EUV(Extreme Ultraviolet)光进行成像．结果获得了一宽度为3mm的狭缝的像，实验测得490μm的成像系统的空间分辨率，并分析了影响系统分辨率的各种因素及为提高系统分辨率所应采取的措施．     

New Reaction Engineering Concepts for Selective Oxidation Reactions

In order to enhance product yields in selective oxidation reactions, numerous reaction engineering concepts are being studied worldwide. Periodic operation has been investigated for decades, yet its application is limited to a few examples, such as the butane oxidation after DuPont or reverse-flow reactors for VOC removal. The use of microchannel reactors is a younger field, but it has already yielded promising results for process optimization. Catalytic wall reactors have proved to be a helpful tool for kinetic studies. On the laboratory scale, membrane reactors have displayed favorable behavior in selective oxidation. The Na vapor-catalyzed dehydrogenation of methanol to formaldehyde is a final example of an unusual new concept for selective oxidation.     

The microscopy cell (MicCell), a versatile modular flowthrough system for cell biology, biomaterial research, and nanotechnology

We describe a novel microfluidic perfusion system for high-resolution microscopes. Its modular design allows pre-coating of the coverslip surface with reagents, biomolecules, or cells. A poly(dimethylsiloxane) (PDMS) layer is cast in a special molding station, using masters made by photolithography and dry etching of silicon or by photoresist patterning on glass or silicon. This channel system can be reused while the coverslip is exchanged between experiments. As normal fluidic connectors are used, the link to external, computer-programmable syringe pumps is standardized and various fluidic channel networks can be used in the same setup. The system can house hydrogel microvalves and microelectrodes close to the imaging area to control the influx of reaction partners. We present a range of applications, including single-molecule analysis by fluorescence correlation spectroscopy (FCS), manipulation of single molecules for nanostructuring by hydrodynamic flow fields or the action of motor proteins, generation of concentration gradients, trapping and stretching of live cells using optical fibers precisely mounted in the PDMS layer, and the integration of microelectrodes for actuation and sensing.     

带膜微通道板的工艺和特性研究

微通道板(MCP)电子透射膜是决定Ⅲ代微光像管稳定性和可靠性的主要因素。采用有机衬底掩膜技术和冷基底溅射相结合的方法在MCP输入面制备非晶态Al2O3电子透射膜，测量了带膜MCP紫外光辐照清洗前后的电学特性。讨论在多孔MCP输入面形成连续电子透射膜与气体辉光放电的关系，工艺失败对MCP的危害性。     

一种微通道换热器的设计与分析(英文)

设计了一种用来测试微通道换热性能的实验装置。该系统由微通道换热器、模拟热源、微型水泵、连通管、测试三通及其它测试元件构成。通过检测温度、压力和流量等参数能够得到微通道的传热和摩阻参数。针对该实验装置,对微通道中流体的压降和传热分别进行分析和研究。实验表明,当微通道水力直径为381μm时,宏观理论公式已不适用于微通道摩阻及其换热的计算。此时,微通道的摩阻比宏观理论计算值小31.6%～41.9%;微通道结构具有良好的换热性能,其Nu可达9.2。     

一种新的纸基微流开关及其活跃方法

提出了一种新的、基于声表面波的纸基微流开关。通过软光刻技术制作内含两个微孔的聚二甲基硅氧烷(PDMS)微架,其上固定经折叠、长度可变的纸通道。PDMS微架贴附于压电基片之上,并在待连接的两微通道之下方,折叠纸通道最低端离压电基片间距为2 mm。压电基片上采用微电子工艺光刻一对叉指换能器和反射栅。当足够强度的电信号加到叉指换能器对时,激发两相向声表面波,使得压电基片上微流体输运到折叠纸通道,改变其长度,连接其上待连通的两纸基微通道,完成开关功能。对可编程微流器件提供了一种新的编程和开关控制方法。     

Performances of electrically heated microgroove vaporizers

An electrically heated microgroove vaporizer was proposed. The vaporizer mainly comprised an outer tube, an inner tube and an electrical heater cartridge. Microgrooves were fabricated on the external surface of the inner tube by micro-cutting method, which formed the flow passage for fluid between the external surface of the inner tube and the internal surface of the outer tube. Experiments related to the temperature rise response of water and the thermal conversion efficiency of vaporizer were done to estimate the influences of microgroove＇s direction, feed flow rate and input voltage on the performances of the vaporizer. The results indicate that the microgroove＇s direction dominates the vaporizer performance at a lower input voltage. The longitudinal microgroove vaporizer exhibits the best performances for the temperature rise response of water and thermal conversion efficiency of vaporizer. For a moderate input voltage, the microgroove＇s direction and the feed flow rate of water together govern the vaporizer performances. The input voltage becomes the key influencing factor when the vaporizer works at a high input voltage, resulting in the similar performances of longitudinal, oblique and latitudinal microgroove vaporizers.     

等离子熔积直接成形形状特性的基础研究

系统分析了熔积成形技术中影响成形形状特性的原因,研究了转移弧电流、扫描速度和起弧高度对成形精度的影响机理.实验表明,以上参数对等离子熔积直接成形形状特性的影响显著,对改善零件的成形精度起决定性的作用;通过优化成形工艺参数,焊道表面质量得到显著好转.     

Numerical simulation of electroosmotic flow in hydrophobic microchannels

Electroosmotic flow (EOF) is a promising way for driving and mixing fluids in microfluidics. For the parallel-plate microchannel with the hydrophobic surface, this paper solved the governing equations using the finite element method (FEM), and the effects of microchannel height, electric strength and ionic concentration on EOF were thus investigated. The simulation indicates that the transient characteristics of EOF are similar in hydrophobic and hydrophilic microchannels, the steady time of EOF is proportional to the square of microchannel height, and the scale is microsecond. EOF velocity is proportional to the electric strength and independent of the channel height, and decreases slowly with the ionic concentration, which is lower than that in hydrophilic microchannel due to the presence of slip length in hydrophobic microchannel. The results can provide valuable insights into the optimal design of microchannel surfaces to achieve accurate EOF control in hydrophobic microchannel. Supported by the National Natural Science Foundation of China (Grant No. 50730007)     

变截面微通道散热器流动和传热特性

为了解决电子芯片散热问题,通过数值模拟的方法,研究了去离子水流经微通道散热器时的流动和传热特性.微通道散热器由无氧铜层叠焊接而成,散热器内微通道当量直径为0.23 mm,去离子水流经散热器时平均雷诺数为252~1 060,加热面热流密度为2×106W/m2.结果表明:不同雷诺数时,三角凹穴周期性变截面微通道散热器的传热性能明显优于矩形等截面直通道散热器;前者加热面平均温度和最高温度均比后者低2~3℃,且两者压降相差不大;随着去离子水流量的增加,散热器加热面平均温度降低,但当流量增加到一定程度后,加热面温度变化不明显,说明不能单靠增大泵功来强化传热.