Boron doping induced electronic reconfiguration of Fe-Nx sites in N-doped carbon matrix for efficient oxygen reduction reaction in both alkaline and acidic media

Developing non-precious metal-based catalysts as the substitution of precious catalysts (Pt/C) in oxygen reduction reaction (ORR) is crucial for energy devices. Herein, a template and organic solvent-free method was adopted to synthesize Fe, B, and N doped nanoflake-like carbon materials (Fe/B/N–C) by pyrolysis of monoclinic ZIF-8 coated with iron precursors and boric acid. Benefiting from introducing B into Fe–N–C, the regulated electron cloud density of Fe-N_x sites enhance the charge transfer and promotes the ORR process. The as-synthesized Fe/B/N–C electrocatalyst shows excellent ORR activity of a half-wave potential (0.90 V vs 0.87 V of Pt/C), together with superior long-term stability (95.5% current density retention after 27 h) in alkaline media and is even comparable to the commercial Pt/C catalyst (with a half-wave potential of 0.74 V vs 0.82 V of Pt/C) in an acidic electrolyte. A Zn-air battery assembled with Fe/B/N–C as ORR catalyst delivers a higher open-circuit potential (1.47 V), specific capacity (759.9 mA h g^?1_Zn at 10 mA cm^?2), peak power density (62 mW cm^?2), as well as excellent durability (5 mA cm^?2 for more than 160 h) compared to those with commercial Pt/C. This work provides an effective strategy to construct B doped Fe–N–C materials as nonprecious ORR catalyst. Theoretical calculations indicate that introduction of B could induce Fe-N_x species electronic configuration and is favorable for activation of OH1 intermediates to promote ORR process.     

Mathematical representation of radiality constraint in distribution system reconfiguration problem

Distribution systems are most commonly operated in a radial configuration for a number of reasons. In order to impose radiality constraint in the optimal network reconfiguration problem, an efficient algorithm is introduced in this paper based on graph theory. The paper shows that the normally followed methods of imposing radiality constraint within a mixed-integer programming formulation of the reconfiguration problem may not be sufficient. The minimum-loss network reconfiguration problem is formulated using different ways to impose radiality constraint. It is shown, through simulations, that the formulated problem using the proposed method for representing radiality constraint can be solved more efficiently, as opposed to the previously proposed formulations. This results in up to 30% reduction in CPU time for the test systems used in this study.     

An interpretative structural modeling based network reconfiguration strategy for power systems

The network reconfiguration is an important stage of restoring a power system after a complete blackout or a local outage. Reasonable planning of the network reconfiguration procedure is essential for rapidly restoring the power system concerned. An approach for evaluating the importance of a line is first proposed based on the line contraction concept. Then, the interpretative structural modeling (ISM) is employed to analyze the relationship among the factors having impacts on the network reconfiguration. The security and speediness of restoring generating units are considered with priority, and a method is next proposed to select the generating unit to be restored by maximizing the restoration benefit with both the generation capacity of the restored generating unit and the importance of the line in the restoration path considered. Both the start-up sequence of generating units and the related restoration paths are optimized together in the proposed method, and in this way the shortcomings of separately solving these two issues in the existing methods are avoided. Finally, the New England 10-unit 39-bus power system and the Guangdong power system in South China are employed to demonstrate the basic features of the proposed method.     

岩性指示曲线重构及其在储层预测中的应用

大牛地上古生界岩性气藏主要发育在三角洲分流河道沉积的下石盒子组、海陆交互沉积的山西组及以潮坪相沉积为主的太原组,储层是储集性能较差的致密砂岩,平均孔隙度小于10％,渗透率小于1×10-2μm2,储层单层厚度一般小于10 m,砂体横向连通性较差。由于低孔、低渗特征导致储层与围岩的波阻抗差异微弱,用地震资料进行储层预测困难。为此,针对大牛地石板太工区优质储层的岩性特征和测井响应特征进行了测井综合分析,利用对岩性粒度敏感的自然伽马曲线,以及对岩性粒度响应频率较低,且与波阻抗有较好对应关系的中子曲线重构了岩性指示曲线。岩性指示曲线不仅可以有效地识别优质砂体,划分不同岩性,为地震、测井信息结合的岩性反演建立桥梁,同时也为反演结果识别气层打下了基础。利用岩性指示曲线、波阻抗和电阻率曲线进行的地震、测井联合反演技术在石板太工区取得了较好的效果,同时,对石板太工区下石盒子组盒2段、山2段进行了储层和含气性预测,划分了有利含气区带,部署的2口开发井和1口探井有2口井见气,其中1口井获高产气流。     

几种高级便携式打印机性能特点比较

本文是对市场上几款高级便携式打印机主要性能特点的比较考察报告，包括：佳能生产的CanonBJC-70型便携式彩色喷墨打印机，惠普生产的HPDeskJet340型便携式彩色喷墨打印机和Pentax生产的Pentax PocketJet便携式打印机，后者必须使用热敏纸。     

ARAM·ARIES SPM-Lite便携式遥测地震数据采集系统简介

ARAM·ARIES SPM-Lite便携式遥测地震数据采集系统是加拿大GEO-X公司在2002年下半年推出的全新小型便携式地震数据采集系统。该仪器运用了当今最先进的计算机制造技术、网络化技术和微电子技术,除继承了ARAM-ARIES地震数据采集系统所有功能和技术外,它还简化了硬件结构,使体积更小,重量更轻,功能性更强。更加适应地矿、煤田、丛林和山区进行地震勘探。     

SFTMP——一个实现软件容错的多处理机系统

多版本软件通过设计相异性实现了软件容错。为了对这种方法进行研究，我们的课题实现了一个三版本软件系统，称之为SFTMP（SoftwareFault－TolerantMultiProcessor）。本文描述了SFTMP的硬件结构和软件执行支持环境，该环境包括同步、表决和监控功能、版本间的通讯及故障的恢复和重构。     

计算机便携式取证系统的设计与实现

目前,以计算机信．g-系统为犯罪对象和工具的新型犯罪活动越来越多,造成的危害也越来越大。侦破这些案件必须要用到计算机取证技术,而电子证据本身和取证过程有许多不同于传统物证和取证的特点,给司法工作和信息安全领域都提出了新的挑战。为此,文章设计开发了一款基于WindowsPE系统的便捷、实用、安全、有效的计算机便携式取证系统。电子证据的收集与处理是通过内置于u盘的WindowsPE系统来完成的;利用OpenSSL提供的编程接口和PKI相关技术实现对电子证据的保密、认证与保存等功能。最后通过测试与分析,表明该系统能实现对电子证据的收集、处理和电子证据的安全有效保存。     

Run-time generation of partial FPGA configurations

This paper presents and evaluates a method of generating partial bitstreams at run-time for dynamic reconfiguration of sections of an FPGA. The method is intended for use in adaptive embedded systems that employ run-time reconfiguration to achieve high flexibility and performance. The proposed approach combines partial bitstreams of coarse-grained components to produce a new partial bitstream implementing a given circuit netlist. Topological sorting of the netlist is used to determine the initial positions of individual components, whose placement is then improved by simulated annealing. Connection routing is done by a breadth-first search of the reconfigurable area based on a simplified resource model of the reconfigurable fabric. The desired partial bitstream is constructed by merging together the default bitstream of the reconfigurable area, the relocated partial bitstreams of the components, and the configurations of the switch matrices used for routing. The approach is embodied in a code library that applications can use to create new bitstreams at run-time. For the members of a set of 29 benchmarks (both synthetic and application-derived) having between five and 41 components, the complete process of bitstream generation takes between 8 s and 35 s when running on an embedded PowerPC 405 microprocessor clocked at 300 MHz.     

IETM技术在便携式工卡系统中的应用研究

从飞机制造的角度出发,以IETM技术为基础,以带Windows 7操作系统的便携式终端为硬件平台,研究开发应用于某机机载机电设备装配指导的交互式电子工卡系统。文中主要介绍了系统设计的背景知识、开发架构和软硬件实现方法,结合XML和SQL数据库技术创作符合GJB6600标准的应用系统。该系统的成功研制和投入使用可将电子信息技术的最新研究成果用于生产实践,既可有效地减轻生产一线工作人员的劳动强度,又能极大地提高飞机数字化制造效率。