N.m.r. line shape-relaxation correlation analysis of bitumen and oil sands

The first results of the analysis of bitumen and oil sands using the recently developed n.m.r. spingrouping technique are presented. The n.m.r. relaxation experiments were carried out on bitumen, and on natural and dried oil sands samples. The results indicate that the spin-grouping can resolve and quantify several components of the samples studied. The bitumen and bitumen fraction of the oil sands are resolved according to their spin-spin relaxation times into three major groups: solid-like (rigid), solid-like (mobile) and semi-liquid. The water in the oil sands exists in two different environments. Tentatively one environment is assigned to be the bridges between the sand grains, while the other is assigned to be the clay surface. One can conclude that with spin grouping of complex mixtures the decomposition (in which components are resolved according to their dynamic state) is possible. The accuracy of such resolution is of the order of a few per cent.     

The radiation crosslinking and scission of ethylene-propylene copolymers studied by solid-state nuclear magnetic resonance

Methyl groups from chain scission and H-crosslinks have been identified by solid-state nuclear magnetic resonance in amorphous ethylene-propylene copolymers containing 23 and 36 mole % propylene after γ-irradiation to 10 MGy at 30°C. G (scission) and G (crosslink) values determined from the n.m.r. spectra and by extraction are in agreement, which suggests that the crosslinks are not clustered. This may differ from the situation in polyethylene where there is a substantial crystalline content. G(S). G(X) and the ratio G(S)/G(X) increase with increasing propylene content of the copolymers.     

高层民用建筑中水泵结合器的设置

就高层民用建筑消防设计中水泵结合器的设置问题，从水泵结合器与消防车的配套设置、水泵结合器在自喷消防系统中的设置、安全阀的设置等方面介绍了具体方法，以合理设置并消除故障。     

Pulsed field gradient n.m.r. measurements and theoretical interpretation of the self-diffusion of polystyrene in solution

The self-diffusion coefficients of polystyrene dissolved in C₆D₆ were measured by means of pulsed field gradient n.m.r.. The dependence on the molecular weight was of the power of -2 in accordance with the reptation model. The concentration dependence was theoretically calculated within the blob concept which shows that in the crossover region the self-diffusion coefficient is determined only by the blob dimensions and the monomeric friction coefficient is constant. The calculated concentration dependence agrees well with that observed by the authors.     

Construction and stratification of the stability domains of the linear dynamic systems with PID controllers

The regularities of motion of a point on the plane (in the space) of adjustable controller parameters at variations of the phase margin under a fixed crossover frequency were analyzed. The problem of decomposition of the stability domain into the zones with simple and complex Nyquist plots and subsequent construction of the point subset where all points satisfying the requirements on the system frequency characteristics was solved. Examples were presented.     

The distribution of anthocyanins in grape skin extracts of port wine cultivars as determined by high performance liquid chromatography

The distribution of anthocyanins in methanolic skin extracts of 16 grape cultivars used for port wine production and grown at five sites in the Douro Valley in Northern Portugal has been assessed by high performance liquid chromatography. Results are confined to the seven most readily separated and identified anthocyanins and are expressed as percentages of their total (88–99% of the total integrated area). Anthocyanins based on malvidin (Mv) predominated. Of these, Mv 3-glucoside was the major pigment (33–60%), being exceeded by Mv 3-p-coumarylglucoside (2–51%) in only two cultivars; Mv 3-acetylglucoside (1–15%) was consistently the lowest. Peonidin 3-glucoside (1–27%) was prominent in four cultivars, but delphinidin 3-glucoside (1–11%), petunidin 3-glucoside (2–11%) and cyanidin 3-glucoside (trace-6%) were of low proportions throughout. The ratio Mv 3-acetylglucoside/total Mv glucosides appeared characteristic of cultivar, independent of site, and a useful aid to identification of grape cultivars. The coloured pulp of some cultivars contained peonidin 3-glucoside as a major component, present in greater proportions than in the skin; the percentage of Mv 3-p-coumarylglucoside was lower in pulp than in skin. The identities of six of the seven anthocyanins were confirmed by fast atom bombardment mass spectrometry and the structures of the Mv derivatives were determined by nuclear magnetic resonance. The formation of formyl and acetyl anthocyanin artefacts is described.     

Microhardness and corrosion behavior in CrN/electroless Ni/mild steel complex coating

The electroless nickel–phosphorous (Ni–P) coating was chosen as an interlayer to improve the properties of the CrN/mild steel (MS) composite. A hypophosphite-reduced acid solution was used to first deposit electroless Ni–P onto MS substrates, and then the CrN overlayer was deposited by reactive r.f. magnetron sputtering onto the electroless Ni–P modified substrate. The electroless Ni–P layer crystallizes with the precipitation of a Ni₃P phase during r.f. sputtering, and thus a coating–substrate composite of CrN/Ni–Ni₃P/MS is formed. The electroless Ni–P coating increases the surface hardness of the steel substrate to more than three times. The surface hardness of the CrN coating modified by an electroless Ni–P interlayer exhibits a hardness higher than 2000 HK_0.015. The usual substrate effect on the microhardness of the coatings is nearly eliminated with the complex coating feature, and a significant enhancement of surface hardness in the coating assembly is achieved. The corrosion tests indicate that the Ni–Ni₃P/MS configuration exhibits a more positive E_corr value (i.e. less electronegative) than CrN/MS and the corresponding potential curve is shifted toward the low-current side, indicating a better anti-corrosion performance. Through comparison of the E_corr values and the polarization curves, it is demonstrated that the CrN/Ni–Ni₃P/MS composite exhibits significantly higher corrosion resistance than the Ni–Ni₃P/MS and CrN/MS coating configurations.     

Diluent effects on carbonate mobility in bisphenol-A polycarbonate in the solid state

The effect of miscible low molecular weight additives on the mobility of the carbonate group in bisphenol-A polycarbonate (BPAPC) has been studied using n.m.r. and dielectric relaxation experiments in the solid state. Proton-enhanced dipolar-decoupled carbon-13 n.m.r. spectra of BPAPC, isotopically enriched at the carbonate position, are obtained without magic-angle sample spinning. The resolved chemical shift anisotropy allows study of nuclear spin relaxation for the carbonate groups in the polymer that have different orientations relative to the static magnetic field in the laboratory frame. The spin-lattice relaxation time in the rotating frame (T_1?) is measured at a motional-probe frequency of 50 kHz for the undiluted polymer and for BPAPC-diluent blends containing either dibutylphthalate or dinitrobiphenyl. The T_1? exhibits some dependence on orientation in all systems studied. In the blend containing dibutylphthalate (DBP), T_1? is decreased by a factor of two for all orientations of the carbonate group. This implies that DBP substantially increases the spectral density of 50 kHz motions in the carbonate region of the polymer at ambient temperature. In contrast, dinitrobiphenyl does not significantly alter the Fourier component of thermal fluctuations at 50 kHz. Dielectric relaxation measurements at 10 kHz reveal that the primary (T_g) and secondary (β) motional processes in BPAPC are affected by low molecular weight additives. An intermediate relaxation process appears in the temperature interval between the glass transition temperature (T_g) and the sub-T_g β-relaxation (T_β) in the polymer-diluent blends. The n.m.r. spin-lattice relaxation rate in the rotating frame, T^?1_1?, correlates well with the relative magnitude of the dielectric dissipation factor (tan δ_ε) between T_g and T_β.     

High resolution solid state 13C n.m.r. of butadiene grafted polypropylene

¹H dipolar decoupled ¹³C n.m.r. experiments with the aid of the magic angle spinning technique have been used to determine the graft content and the isomer content of the polybutadiene grafts in a graft copolymer with isotactic polypropylene.     

Structural significance of the alkyl substituent at the C-4 of (+)-trans-verbenyl acetate in sex pheromonal activity of the American cockroach

The significance of the alkyl group at the C-4 of (+)-trans-verbenyl acetate, which is the sex pheromone mimic of the American cockroach, was investigated. Seven alcohols possessing an ethyl, propyl, or dimethyl group at this position of the 6,6-dimethylbicyclo[3.1.1]heptane skeleton were synthesized and evaluated by behavioral assay. All of the alcohols were inactive, while three of four acetates of the 2rc="/content/v44p276r6p685720/xxlarge945.gif" alt="agr" align="BASELINE" BORDER="0">-alcohols induced sexual behavior in male cockroaches at the 0.02 or 0.5 mg dosage level, either of which is many orders of magnitude higher than the threshold level of the natural sex pheromones (10^–8 mg). Among the acetates, the compounds with a methyl group or an rc="/content/v44p276r6p685720/xxlarge945.gif" alt="agr" align="BASELINE" BORDER="0">-oriented ethyl group at C-4 showed the highest activity. The results are discussed in terms of spatial requirements of the molecules for interactions with the receptor.Studies on the sex pheromone mimic of the American cockroach, (+)-trans-verbenyl acetate. Part VIII. For Part VII, seeComp. Biochem. Physiol.,70A: 229–234 (1981).