32位MIPS微处理器中乘法器的设计和实现

在Booth算法的基础上,结合MIPS 4KC微处理器中的流水线结构和乘法器的工作过程,提出了一种改进的Booth乘法器的设计方法,并采用全制定方法实现,用这种方法实现的乘法器单元具有面积小、单元电路可重复性好、版图设计工作量小、功耗低等特点.     

Active set truncated-Newton algorithm for simultaneous optimization of distillation column

An active set truncated-Newton algorithm (ASTNA) is proposed to solve the large-scale bound constrained sub-problems. The global convergence of the algorithm is obtained and two groups of numerical experiments are made for the various large-scale problems of varying size. The comparison results between ASTNA and the subspace limited memory quasi-Newton algorithm and between the modified augmented Lagrange multiplier methods combined with ASTNA and the modified barrier function method show the stability and effectiveness of ASTNA for simultaneous optimization of distillation column.     

Design of pole-assignment controller for systems with algebraic-equation constraint

In this paper we have studied the control of linear systems with algebraic-equation constraint. A pole-assignment controller with two-layer structure for such constrained systems has been presented. The objective of the controller is to assign the desired poles to constrained system and simultaneously force the corresponding closed-loop system to satisfy the constraint. The conditions for the existence of pole-assignment controller are discussed in different cases. The implementation algorithm of pole-assignment controller is also presented. An example is given to illustrate the validity of the method in this paper.     

Scanning electron microscope electron detector with a radial type discrete dynode electron multiplier

A discrete dynode electron multiplier with radial flux of electrons was built and tested in the range of low‐voltage scanning electron microscopy as a backscattered electron detector of topographic contrast. The multiplier collects backscattered electron emitted in a specific range of take‐off angles and over the whole azimuth angular range enabling large solid collection angle. Multipliers with different dynode shapes were studied theoretically with the use of the software for particle optics and three assemblies were built and tested experimentally. The gain estimation, assessment of the type of detected electrons (secondary electron or backscattered electron), imaging the spatial collection efficiency and signal‐to‐noise measurements were performed.     

寄生电容不敏感的开关电容乘法器的设计与分析

本文论述了寄生电容不敏感型开关电容四象限模拟乘法器的设计，并提出了一种新型的电路结构，分析了它的性能，以及元器件的非理想特性对其性能的影响和采取的补偿方法。     

Time jitter analysis of 1-bit sigma-delta synthesizer

This letter presents a general analysis of time jitter in sigma-delta synthesizer. One of the practical applications of 1-bit sigma-delta systems is a generation of high-resolution local oscillator (LO) signals. In order to generate LO signals, one may use a single-bit sigma-delta technique to encode sine waves. Today, direct generation of high-frequency sine wave using a clock with higher frequency, is possible. In this letter, we will analyze different LO signal generators and develop a practical way of computation to decide how to choose the best configuration under minimum degradation of signal-to-noise ratio (SNR) at the output.     

Identification environment and robust forecasting for nonlinear time series

In this paper, the methods of time series for nonlinearity are briefly surveyed, with particular attention paid to a new test design based on a neural network specification. The proposed integrated expert system contains two main components: an identification environment and a robust forecasting design. The identification environment can be viewed as a integrated dynamic design in which cognitive capabilities arise as a direct consequence of their self-organizational properties. The integrated framework used for discussing the similarities and differences in the nonlinear time series behavior is presented. Moreover, its performance in prediction proves to be superior than the former work. For the investigation of robust forecasting, we perform a simulation study to demonstrate the applicability and the forecasting performance.     

Fisher discrimination based low rank matrix recovery for face recognition

In this paper, we consider the issue of computing low rank (LR) recovery of matrices with sparse errors. Based on the success of low rank matrix recovery in statistical learning, computer vision and signal processing, a novel low rank matrix recovery algorithm with Fisher discrimination regularization (FDLR) is proposed. Standard low rank matrix recovery algorithm decomposes the original matrix into a set of representative basis with a corresponding sparse error for modeling the raw data. Motivated by the Fisher criterion, the proposed FDLR executes low rank matrix recovery in a supervised manner, i.e., taking the with-class scatter and between-class scatter into account when the whole label information are available. The paper shows that the formulated model can be solved by the augmented Lagrange multipliers and provides additional discriminating power over the standard low rank recovery models. The representative bases learned by the proposed method are encouraged to be closer within the same class, and as far as possible between different classes. Meanwhile, the sparse error recovered by FDLR is not discarded as usual, but treated as a feedback in the following classification tasks. Numerical simulations demonstrate that the proposed algorithm achieves the state of the art results.     

基于重加权快速交替方向法的频谱感知

在认知无线电网络中,由于深衰落和低信噪比的影响,单个认知用户的宽带频谱检测性能较差,且算法复杂度较高。针对该问题,提出一种基于重加权快速交替方向法的频谱感知算法。利用目标函数的凸性,通过求导简化辅助变量的更新过程。对目标函数进行线性化处理,增加一个二次项,使待估变量更新时部分项线性化的增广拉格朗日函数成为严格凸函数,并使用迭代软阈值算法进行求解。在目标项中增加大权值抑制信号中的非零元素,获得接近于最小?0范数的解。实验结果表明,该算法能有效提高低信噪比环境下的检测概率和检测速度。     

基于增广拉格朗日乘子法的水平井射孔密度分布研究

合理的孔眼密度分布能改善水平井入流剖面,有利于延缓水、气锥进。考虑水平井井筒内摩擦损失和加速损失的影响,基于Landman油藏渗流模型,建立了以孔眼位置为优化设计变量、均匀入流剖面为约束条件、水平井产量或生产压差为目标函数的射孔优化模型。采用增广拉格朗日乘子法对有限导流水平井的射孔密度分布进行优化研究。优化结果表明,为获得尽可能均匀的入流剖面,沿水平井跟端向指端方向射孔密度逐渐增加,约在井筒长度的3/5位置附近取得最大值,在趾端处降低;均匀入流剖面下的产量较均匀射孔水平井的产量低。