| 热负荷对柴油机结构强度及密封性能的影响 |
| |
| 引用本文： | 杨陈,郝志勇,陈馨蕊. 热负荷对柴油机结构强度及密封性能的影响[J]. 浙江大学学报(工学版), 2010, 44(4): 756-760. DOI: 10.3785/j.issn.1008-973X.2010.04.023 |
| |
| 作者姓名： | 杨陈 郝志勇 陈馨蕊 |
| |
| 作者单位： | 浙江大学机械与能源工程学院; |
| |
| 基金项目： | 国家自然科学基金资助项目(50575203) |
| |
| 摘 要： | 将有限元仿真技术应用到发动机稳态传热和热机耦合分析中,研究热负荷对柴油机各部件应力分布及密封性能的影响.建立1130型柴油机主要部件的有限元传热模型,施加合理的边界条件和载荷,计算得到各组件的温度场分布.借助有限元方法,分析在热应力工况下温度场对发动机密封性的影响.温度场使得缸盖螺栓张力和气缸垫片压力变大,有助于改善密封性.与机械载荷工况进行对比,在热机耦合工况下气缸套和气缸盖的应力明显变大,说明在气缸盖、气缸套的强度计算中不应忽视热负荷的作用.
|
| 关 键 词： | 柴油机 机体组件 有限元方法 热机耦合 稳态传热 |
Thermal load influence on stress intensity and sealing performance of diesel engine |
| |
| YANG Chen,HAO Zhi-yong,CHEN Xin-rui. Thermal load influence on stress intensity and sealing performance of diesel engine[J]. Journal of Zhejiang University(Engineering Science), 2010, 44(4): 756-760. DOI: 10.3785/j.issn.1008-973X.2010.04.023 |
| |
| Authors: | YANG Chen HAO Zhi-yong CHEN Xin-rui |
| |
| Affiliation: | College of Mechanical and Energy Engineering, Zhejiang University, Hangzhou 310027, China |
| |
| Abstract: | Finite element simulation technology was applied to the steady heat transfer and thermomechanical coupling analysis in order to investigate the influence of thermal load on stress intensity and sealing performance.An finite element heat transfer model of 1130 diesel engine assembly was set up,based on which the steady heat transfer analysis was performed subsequently by applying reasonable boundary conditions and loads.The influence on engine sealing performance due to thermal field under the thermal stress... |
| |
| Keywords: | diesel engine block assembly finite element method thermomechanical coupling steady heat transfer |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《浙江大学学报(工学版)》浏览原始摘要信息 |
|
点击此处可从《浙江大学学报(工学版)》下载全文 |
