| 轴向车铣六面体工件运动矢量建模的研究 |
| |
| 引用本文： | 石莉,贾春德,姜增辉.轴向车铣六面体工件运动矢量建模的研究[J].沈阳理工大学学报,2002,21(4):4-7. |
| |
| 作者姓名： | 石莉 贾春德 姜增辉 |
| |
| 作者单位： | 沈阳工业学院,高速切削工程技术中心,辽宁,沈阳,110015 |
| |
| 基金项目： | 国家“九五”科技攻关项目 (95 -A2 2 - 0 1) |
| |
| 摘 要： | 以加工六面体工件为例，通过矢理建模，给出了描述轴向车铣六面体工件运动过程的基本矢量方程，通过对运动轨迹进行计算机仿真，得出刀具齿数、转速比及铣削方式是影响轴向车铣已加工表面质量的主要因素。
|
| 关 键 词： | 零件加工 轴向车铣 六面体工件 矢量建模 仿真 运动轨迹 |
| 文章编号： | 1003-1251(2002)04-0004-04 |
| 修稿时间： | 2002年6月11日 |
Research on the Movement Vector-Modeling of Axial Turning-Miling Hexanon-Workpiece |
| |
| SHI Li,JIA Chun de,JIANG Zeng hui.Research on the Movement Vector-Modeling of Axial Turning-Miling Hexanon-Workpiece[J].Transactions of Shenyang Ligong University,2002,21(4):4-7. |
| |
| Authors: | SHI Li JIA Chun de JIANG Zeng hui |
| |
| Abstract: | Through an example of machining hexagon workpiece,using vector modeling, a basic vector equation describing the movement process of axial turning miling is given. Through computer simulation of the movement track of axial turning miling it is concluded that the surface quality of the workpiece is mainly determined by the ratio of the rotating speed, the count of teeth in cutter and the mode of turning milling. |
| |
| Keywords: | axial turning miling hexagon workpiece vector modeling simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
