| 细高齿齿轮齿形优化及仿真分析 |
| |
| 引用本文： | 白国庆,王铁,张瑞亮,赵富强. 细高齿齿轮齿形优化及仿真分析[J]. 机械传动, 2012, 36(5): 46-48 |
| |
| 作者姓名： | 白国庆 王铁 张瑞亮 赵富强 |
| |
| 作者单位： | 1. 太原理工大学机械工程学院车辆工程系,山西太原,030024
2. 太原理工大学机械工程学院齿轮研究所,山西太原,030024 |
| |
| 摘 要： | 通过Romax软件对某变速器内细高齿齿轮传动分析,发现齿面载荷分布不均。进而依据齿面的单元载荷对齿轮齿廓进行修形优化及仿真分析,优化后其传递误差波动有所减小,偏载现象也明显改善,从而对细高齿齿轮传动的设计应用起到一定的参考作用。
|
| 关 键 词： | 细高齿 齿轮修形 Romax 仿真分析 变速器 |
Optimization and Simulation Analysis of Tooth Profile for High - gear |
| |
| Bai Guoqing , Wang Tie , Zhang Ruiliang , Zhao Fuqiang. Optimization and Simulation Analysis of Tooth Profile for High - gear[J]. Journal of Mechanical Transmission, 2012, 36(5): 46-48 |
| |
| Authors: | Bai Guoqing Wang Tie Zhang Ruiliang Zhao Fuqiang |
| |
| Affiliation: | 1 Department of Vehicular Engineering,School of Mechanical Engineering,Taiyuan University of Technology,Taiyuan 030024,China)(2 Gear Research Institute,School of Mechanical Engineering,Taiyuan University of Technology,Taiyuan 030024,China) |
| |
| Abstract: | Through analyzing the high-gear in transmission based Romax,the load distribution on the tooth face is unbalanced seriously.After modifying the tooth profile of high-gear according to load per unit length and simulation analysis,the fluctuation of transmission error is reduced and the condition of unbalanced load is improved obviously,which is of reference to the design of high-gear. |
| |
| Keywords: | High-gear Tooth modification Romax Simulation analysis Transmission |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
