首页 | 本学科首页   官方微博 | 高级检索  
     

高速机床主轴-轴承系统动态性能研究
引用本文:袁胜万,崔岗卫,李朝万,余正斌,聂艳. 高速机床主轴-轴承系统动态性能研究[J]. 机床与液压, 2014, 42(17): 38-41
作者姓名:袁胜万  崔岗卫  李朝万  余正斌  聂艳
作者单位:沈机集团昆明机床股份有限公司,云南昆明,650203
基金项目:国家科技重大专项资助项目(2012ZX04010-021-02);国家科技重大专项资助项目
摘    要:为研究主轴-轴承系统的动态性能,以某型号精密卧式加工中心主轴系统为研究对象,通过偏心质量激励法测得主轴支承轴承刚度,采用Timoshenko梁单元对主轴进行有限元建模,系统地分析了主轴离心效应、轴承预紧力对于主轴动态性能的影响,并进行了实验验证。结果表明:提高预紧力可有效增加主轴轴承刚度,提高主轴动态性能。同时证明采用有限元法计算主轴轴承的刚度是一种行之有效的方法。

关 键 词:预紧力  离心力  动态特性  轴承刚度

Research on Dynamic Performance of Spindle-Bearing System of High Speed Machine Tool
YUAN Shengwan,CUI Gangwei,LI Chaowan,YU Zhengbin,NIE Yan. Research on Dynamic Performance of Spindle-Bearing System of High Speed Machine Tool[J]. Machine Tool & Hydraulics, 2014, 42(17): 38-41
Authors:YUAN Shengwan  CUI Gangwei  LI Chaowan  YU Zhengbin  NIE Yan
Abstract:In order to research the dynamic characteristics of spindle-bearing system, the spindle system of one type of precision horizontal machining center is taken as the object. The stiffness of the bearings for spindle support was set to the values measured in eccentricity mass excitation tests, and the spindle was finite element modeled by using Timoshenko beam elements. The influence of spindle centrifugal effect and bearing preload on the dynamic performance of the spindle-bearing system were analyzed systematically, and were verified by tests. The results show that increasing the preload can effectively improve the stiffness of the spindle bearings as well as the dynamic performance of the spindle. At the same time, it is proved that to calculate the stiffness of spindle bearings by using Finite Element Method (FEM) is an effective method.
Keywords:Preload  Centrifugal force  Dynamical characteristics  Bearing stiffness
本文献已被 万方数据 等数据库收录!
点击此处可从《机床与液压》浏览原始摘要信息
点击此处可从《机床与液压》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号