| 聚乳酸的熔融聚合法的改进研究 |
| |
| 引用本文： | 朱秀华,吕彤,杜玉玺,张远,李东明. 聚乳酸的熔融聚合法的改进研究[J]. 应用化工, 2006, 35(3): 219-221 |
| |
| 作者姓名： | 朱秀华 吕彤 杜玉玺 张远 李东明 |
| |
| 作者单位： | 天津工业大学,材料化工学院,天津,300160 |
| |
| 摘 要： | 采用熔融聚合法合成聚乳酸,对实验条件进行了优化选择。筛选出SnC l2为最适宜催化剂进行熔融聚合。最佳工艺条件为:催化剂用量为0.5%质量分数,反应温度为180℃,反应时间7.5 h,同时利用搅拌与鼓泡真空法使缩聚后期体系粘稠大搅拌脱水困难问题进一步得到解决,使熔融聚合产物的粘均分子量Mη达83483。
|
| 关 键 词： | 聚乳酸 生物降解材料 熔融聚合 催化剂 |
| 文章编号： | 1671-3206(2006)03-0219-03 |
| 收稿时间： | 2005-11-08 |
| 修稿时间： | 2005-11-08 |
Study on improvement of melt polymerization of polylactic acid |
| |
| ZHU Xiu-hua,L Tong,DU Yu-xi,ZHANG Yuan,LI Dong-ming. Study on improvement of melt polymerization of polylactic acid[J]. Applied chemical industry, 2006, 35(3): 219-221 |
| |
| Authors: | ZHU Xiu-hua L Tong DU Yu-xi ZHANG Yuan LI Dong-ming |
| |
| Affiliation: | Institute of Material Science and Chemical Engineering,Tianjin Polytechnic University,Tianjin 300160, China |
| |
| Abstract: | This paper reports melt polymerization of polylactic acid(PLA).The best reaction conditions have been chosen by repeated experiments.SnCl_2 was chose as the appropriate catalyst.The optimal reaction conditions were found out,that is 0.5% SnCl_2,180℃and 7.5 h.Meanwhile the difficulty which is removing water reduced by posterior reaction has been further solved via stir and plumping bladders in the condition of vacuum.The molecular weight M_η of the PLA via melt polymerization can be achieved 83483. |
| |
| Keywords: | PLA biodegradable material melt polymerization catalyst |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
