首页 | 本学科首页   官方微博 | 高级检索  
     

HL-2A装置中性束注入器高抽速钛泵及其实验运行分析
引用本文:杨宪福,姜韶风,魏会领,王贺,李立,江涛,崔成和,曹建勇.HL-2A装置中性束注入器高抽速钛泵及其实验运行分析[J].真空,2012,49(1):15-20.
作者姓名:杨宪福  姜韶风  魏会领  王贺  李立  江涛  崔成和  曹建勇
作者单位:核工业西南物理研究院,四川成都,610041
摘    要:针对中性束注入等离子体加热过程中的高真空条件要求,借助于国际合作方式,我们为HL-2A 装置中性束注入器设计了一种大吸附面积的高抽速钛泵系统.钛泵系统抽速设计值为30万L/s,由两台大泵和一台小泵组成,两台大钛泵分别置于注入器主真空室左右两侧,小钛泵置于注入器副真空室右侧.运行实验结果表明,钛泵完全满足HL-2A中性束注入实验的要求.本文主要介绍了钛泵的工程设计和实验运行结果,简要分析了HL-2A装置中性束加热系统高抽速钛泵的运行特点.

关 键 词:中性束注入  钛升华泵  真空抽速

The Ti-pump of NBI injector with high pumping speed and its operation analysis on HL-2A tokamak
YANG Xian-fu , JIANG Shao-feng , WEI Hui-ling , WANG He , LI Li , JIANG Tao , CUI Cheng-he , CAO Jian-yong.The Ti-pump of NBI injector with high pumping speed and its operation analysis on HL-2A tokamak[J].Vacuum,2012,49(1):15-20.
Authors:YANG Xian-fu  JIANG Shao-feng  WEI Hui-ling  WANG He  LI Li  JIANG Tao  CUI Cheng-he  CAO Jian-yong
Affiliation:(Southwestern Institute of Physics,Chengdu 610041,China)
Abstract:In view of high vacuum condition during neutral beam injection(NBI) plasma heating and with the help of international cooperation,a kind of high pumping speed titanium sublimation pump(TSP) with large adsorption area was developed for the NBI injector on HL-2A tokamak.The designed pumping speed of the pump system is about 3×105L/s,which is composed of two large pumps installed besides of the main chamber and a small pump near the sub-vacuum chamber.The experimental results show that the pumping speed of the TSP system meets the requirement of NBI heating on HL-2A.The engineering design of a TSP system and its characteristics of the pumping speed are analyzed and discussed.
Keywords:NBI  titanium sublimation pump  pumping speed
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号