| 超音速电弧喷涂Ti-Al涂层耐磨性及工艺研究 |
| |
| 引用本文： | 周永涛 王汉功 胡重庆 姚春江. 超音速电弧喷涂Ti-Al涂层耐磨性及工艺研究[J]. 中国表面工程, 2004, 17(5): 41-44 |
| |
| 作者姓名： | 周永涛 王汉功 胡重庆 姚春江 |
| |
| 作者单位： | 第二炮兵工程学院501室,陕西,西安,710025 |
| |
| 摘 要： | 基于均匀设计试验设计方法，进行了超音速电弧喷涂Ti-A1涂层磨粒磨损试验，在对试验结果进行逐次回归分析的基础上，系统并定量的研究了涂层耐磨性能随着喷涂工艺参数的变化规律，得到了优化后的最佳喷涂工艺参数。
|
| 关 键 词： | 超音速电弧喷涂 Ti—Al涂层 磨粒磨损 均匀设计 逐次回归 |
| 文章编号： | 1007-9289(2004)05-0038-04 |
| 修稿时间： | 2004-06-28 |
Research on Wear-resistance of Ti-Al Coating Produced by Supersonic Arc Spraying |
| |
| ZHOU Yong-tao,WANG Han-gong,HU Chong-qing,YAO Chun-jiang. Research on Wear-resistance of Ti-Al Coating Produced by Supersonic Arc Spraying[J]. China Surface Engineering, 2004, 17(5): 41-44 |
| |
| Authors: | ZHOU Yong-tao WANG Han-gong HU Chong-qing YAO Chun-jiang |
| |
| Abstract: | In this paper, based on the uniform design principle, an abrasive wear test of Ti-Al coating produced by supersonic arc spraying was conducted, and a stepwise regression analysis was made. The changing rule of coating wear-resistance with spraying parameters was studied systematically and quantitatively. The optimum spraying parameters were obtained finally. |
| |
| Keywords: | supersonic arc spraying Ti-Al coating abrasive wear uniform design stepwise regression |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《中国表面工程》浏览原始摘要信息 |
|
点击此处可从《中国表面工程》下载全文 |
