| 基于AutoCAD的组合机床夹具元件的参数化设计 |
| |
| 引用本文： | 崔延辉,袁志生,孟兆新,谭光宇,任红丽. 基于AutoCAD的组合机床夹具元件的参数化设计[J]. 哈尔滨理工大学学报, 2001, 6(3): 50-52 |
| |
| 作者姓名： | 崔延辉 袁志生 孟兆新 谭光宇 任红丽 |
| |
| 作者单位： | 1. 哈尔滨理工大学机械动力工程学院
2. 哈尔滨理工大学产业处 |
| |
| 摘 要： | 针对设计组合机床的夹具元件都是通用件、标准件，利用 ＡｕｔｏＣＡＤ软件开发工 具、设计、开发了来具元件库，实现了参数化绘图．此方法可以扩展到组合机床其它元件上，建立 相应元件库，从而简化了设计，提高了效率，具有实用价值和可扩展性．
|
| 关 键 词： | 组合机床 夹具 AutoCAD 参数化绘图 |
| 文章编号： | 1077-2683(2001)03-0050-03 |
| 修稿时间： | 2001-04-05 |
Parameter Design of Aggregate Machine Tool Clamps Based on AutoCAD |
| |
| CUI Yan-hui,YUAN Zhi-sheng,MENG Zhao-xin,TAN Guang Yu,REN Hong-li. Parameter Design of Aggregate Machine Tool Clamps Based on AutoCAD[J]. Journal of Harbin University of Science and Technology, 2001, 6(3): 50-52 |
| |
| Authors: | CUI Yan-hui YUAN Zhi-sheng MENG Zhao-xin TAN Guang Yu REN Hong-li |
| |
| Abstract: | When designing aggregate machine tool, many clamps are general and standard parts. This paper describes how to use AutoCAD as the developing tool to design and develop. the clamp components library and achieve parameter drawing. This method can be extended to the other parts of aggregate machine tool and set up the parts library. So it makes the design simple and the efficiency improved and brings considerable benefits. |
| |
| Keywords: | Aggregate machine tool clamp AutoCAD parameter drawing |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
