N.m.r. study of US Eastern and Western shale oils produced by pyrolysis and hydropyrolysis

Shale oils produced from US Eastern and Western oil shales by pyrolysis and hydropyrolysis processes have been investigated by both ¹H and ¹³C high-resolution n.m.r. techniques. Eastern shale oils produced by hydropyrolysis, and subsequently hydrotreated, were also included. From the n.m.r. data of the shale oils, the average molecular structure parameters were calculated. These parameters quantitatively represent the differences observed in the n.m.r. spectra of the various shale oils because of changes in the chemical composition. Mol percentages of aromatics, olefins, and alkanes were also determined for the shale oils, and show that the composition of the shale oil is dependent upon the geographic origin of the oil shale, the pyrolysis method, and the hydrogenation process. In addition to the study of shale oils, solid-state ¹³C n.m.r. spectra of Eastern and Western oil shales before and after pyrolysis and hydropyrolysis were obtained. The spectral data show that the carbon aromaticities for the Eastern oil shales and shale oils are higher than for the Western oil shale and shale oils. The data also show that hydropyrolysis relative to pyrolysis reduces the amount of residual organic carbon remaining on the spent shales. Carbon aromaticity data for both oil shale and shale oil suggest that the organic moieties present in kerogen may be retained in the shale oils to a greater extent after hydropyrolysis than after pyrolysis.