| 马钢六流小方坯连铸机中间包内型优化水模试验 |
| |
| 引用本文： | 戴朝珊,王建军,朱本立,程维骅,孙束,潘松林,乌力平,何乃树.马钢六流小方坯连铸机中间包内型优化水模试验[J].安徽工业大学学报,1997(4). |
| |
| 作者姓名： | 戴朝珊 王建军 朱本立 程维骅 孙束 潘松林 乌力平 何乃树 |
| |
| 作者单位： | 华东冶金学院(戴朝珊，王建军，朱本立，程维骅)，马钢股份有限公司(孙束，潘松林，乌力平，何乃树) |
| |
| 摘 要： | 对马钢六流方坯连铸机T型中间包内腔优化的水模试验研究，在中间包内设置适当的纵向或横向挡墙，可以把大包注入的钢水较均匀地分配给各水口，减小各水口间的温差，尤其是解决了1，6流水口的低温状况．横向挡墙已在工业生产中采用，效果良好．
|
| 关 键 词： | 连铸 中间包 水模 |
The Hydraulic Research on the Inside Shape of Tundish in the Sixway Strand Billet Continuous Casting |
| |
| Dai Chaoshan, Waug Jianjun, Zhu Benli, Cheng Weihua.The Hydraulic Research on the Inside Shape of Tundish in the Sixway Strand Billet Continuous Casting[J].Journal of Anhui University of Technology,1997(4). |
| |
| Authors: | Dai Chaoshan Waug Jianjun Zhu Benli Cheng Weihua |
| |
| Affiliation: | Dai Chaoshan; Waug Jianjun; Zhu Benli; Cheng Weihua (East China University of Metallurgy)Sun Shu; Pan Songlin; Wu Liping; He Naishu (Ma'anshan Iron & Steel Co.Ltd) |
| |
| Abstract: | The inside shape of tundish in the sixway strand billet continuous casting of Magang was optimized with a water model. The distribution of molten steel from ladle at each nozzle for reducing itS temperature difference by adding across or longitudinal bulkheads in the tundish was examined. The research outcomes was adopted at the present production,which yields good results. |
| |
| Keywords: | Continuous casting Tundish Water model |
| 本文献已被 CNKI 等数据库收录！ |
