Nonuniform sampling techniques for antenna applications

Recent investigations have demonstrated that uniform sampling techniques can be effectively applied for construction of far-field patterns of antennas. There are, however, many circumstances for which it may not be practical to directly utilize uniform sampling techniques. A two-dimensional sampling technique which can employ irregularly (nonuniformly) spaced samples (amplitude and phase) in order to generate the complete far-field patterns is presented. The technique implements a matrix inversion algorithm which depends only on the nonuniform sampled data point locations and with no dependence on the actual field values at these points. A powerful simulation algorithm is presented to allow a real-life simulation of many reflector/feed configurations and to determine the usefulness of the nonuniform sampling technique for the co-polar and cross-polar patterns. Additionally, an overlapped window concept and a generalized error simulation model are discussed to identify the stability of the technique for recovering the field data among the nonuniform sampled data. Numerical results are tailored for the pattern reconstruction of a 20-m offset reflector antenna operating atL-band. This reflector is planned to be used in a proposed measurement concept of large antennas aboard the space shuttle, whereby it would be almost impractical to accurately control the movement of the shuttle with respect to the radio frequency (RF) source in prescribed directions in order to generate uniform (u, v) sampled points. Also, application of the nonuniform sampling technique to patterns obtained using near-field measured data is demonstrated. Finally, results of an actual far-field measurement are presented for the construction of patterns of a reflector antenna from a set of nonuniformly distributed measured amplitude and phase data.