| 基于ARM和CDMA网络的远程监控系统的设计 |
| |
| 引用本文： | 唐晓宇,唐宏,冯慧娟.基于ARM和CDMA网络的远程监控系统的设计[J].通信技术,2007,40(9):39-41. |
| |
| 作者姓名： | 唐晓宇 唐宏 冯慧娟 |
| |
| 作者单位： | 重庆邮电大学,移动通信重点实验室,重庆,400065 |
| |
| 摘 要： | 提出了以CDMA 1X网络作为监控数据传输媒介,以内部带有TCP/IP协议栈的MG815 CDMA无线模块作为通信设备,以飞利浦的ARM芯片LPC2210为微控制器的远程监控系统,并详细介绍了远程终端的硬件和软件设计方案。经多次现场测试表明,本系统通信数据稳定可靠,效果良好。
|
| 关 键 词： | 码分多址 高级精简指令集微处理器 远程监控系统 |
| 文章编号： | 1002-0802（2007）09-0039-03 |
| 修稿时间： | 2007-05-21 |
Design on Remote Supervisory Control System Based on ARM and CDMA Network |
| |
| TANG Xiao-yu,TANG Hong,FENG Hui-juan.Design on Remote Supervisory Control System Based on ARM and CDMA Network[J].Communications Technology,2007,40(9):39-41. |
| |
| Authors: | TANG Xiao-yu TANG Hong FENG Hui-juan |
| |
| Abstract: | This paper introduces a remote supervisory control system based on CDMA 1X network,and with MG815 wireless communication module as the communication device and Philips LPC2210 based on ARM chip as the microcontroller. The hardware structure and design of software are also discussed. Many field measurements indicate that the design is stable,reliable and accords with the requirement of the application,and has a good effect. |
| |
| Keywords: | CDMA ARM remote supervisory control system |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
