| ZG30SiMnCrMoVRE新型耐磨材料的研制 |
| |
| 引用本文： | 马杰,李志军,雷百战. ZG30SiMnCrMoVRE新型耐磨材料的研制[J]. 钢铁研究, 2009, 37(6): 40-42 |
| |
| 作者姓名： | 马杰 李志军 雷百战 |
| |
| 作者单位： | 西安建筑科技大学,冶金工程学院,陕西,西安,710055;陕西省延河水泥机械厂,耐磨铸件分厂,陕西,西安,710038 |
| |
| 摘 要： | 通过大量实验研究，设计并研制出ZG30SiMnCrMoVRE合金及其热处理工艺制度。对给定的合金成分，在930℃对其进行水淬，（230±10）℃进行回火处理，所得合金的硬度和冲击韧性都达到了比较理想的数值。而采用1150℃超高温淬火所得材料的硬度计冲击韧性并不理想。该合金具有生产工艺简单，硬度及冲击韧性较高等特点。
|
| 关 键 词： | 耐磨材料 高硬度 冲击韧性 热处理 |
Research and development of new type wear resistant alloy ZG30SiMnCrMoVRE |
| |
| MA Jie,LI Zhi-jun,LEI Bai-zhan. Research and development of new type wear resistant alloy ZG30SiMnCrMoVRE[J]. Research on Iron and Steel, 2009, 37(6): 40-42 |
| |
| Authors: | MA Jie LI Zhi-jun LEI Bai-zhan |
| |
| Affiliation: | MA Jie1,LI Zhi-jun1,LEI Bai-zhan2(1.School of Metallurgical Engineering,Xi'an University of Architecture & Technology,Xi'an 710055,China,2.Wear-resisting Metal Branch Factory,Shanxi Province Yanhe Cement Machinery Factory,Xi'an 710038,China) |
| |
| Abstract: | Wear resistant alloy ZG30SiMnCrMoVRE and its heat treatment technology were designed and developed on the basis of experiments. In the given condition of chemical compostions, the alloy was water quenched at 930 ℃ and tempered at （230 ± 10）℃. The hardness and impact toughness of the alloy were satisfactory. However, when the alloy was quenched at 1 150℃, the hardness and toughness were not so good. In conclusion, the alloy has high hardness and impact toughness and can be produced with simpler technologies. |
| |
| Keywords: | wear resistant material high hardness impact toughness heat treatment |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
