首页 | 本学科首页   官方微博 | 高级检索  
     

大型同步发电机定子主绝缘结构优化热性能分析
引用本文:丁树业,李伟力,马贤好.大型同步发电机定子主绝缘结构优化热性能分析[J].电工技术学报,2008,23(4):13-19.
作者姓名:丁树业  李伟力  马贤好
作者单位:1. 哈尔滨理工大学电气与电子工程学院,哈尔滨,150040
2. 哈尔滨电机厂有限责任公司,哈尔滨,150040
基金项目:国家自然科学基金,高等学校博士学科点专项科研项目
摘    要:大型同步发电机的绝缘减薄问题是对发电机进行研究的一个重要方面,本文着重研究了由于主绝缘的减薄所导致的股线涡流损耗的变化;采用有限体积法对定子径向沟内的流体场进行了数值计算,得出径向通风沟内不同位置处的流体速度,并由此计算出表面散热系数.此外建立了定子三维温度场的数学模型和物理模型,采用有限元法对定子三维温度场进行了数值计算,将求解结果和试验值进行了比较.最终讨论了由于绝缘减薄对发电机定子三维温度场造成的影响.

关 键 词:大型同步发电机  绝缘厚度减薄  流体场  有限体积法  三维温度场  有限元法  性能分析
修稿时间:2007年4月1日

Thermal Performance Analysis of Stator Main Insulation Structure Optimization for Large Synchronous Generators
Ding Shuye,Li Weili,Ma Xianhao.Thermal Performance Analysis of Stator Main Insulation Structure Optimization for Large Synchronous Generators[J].Transactions of China Electrotechnical Society,2008,23(4):13-19.
Authors:Ding Shuye  Li Weili  Ma Xianhao
Abstract:Thinning of insulation of large synchronous generator is an important aspect for generator research. In this paper, the change of strands eddy loss caused by thinning of main insulation was studied mainly. The fluid field inside stator radial ventilation duct was computed numerically by using of finite volume method (FVM), Fluid velocities at different positions inside radial ventilation were obtained by which the surface heat transfer coefficients were calculated. In addition to the mathematical model and physical model of 3-D stator temperature field were established, 3-D stator temperature fields were calculated using finite element method (FEM), and the computed results were compared with measured value. Finally the impacts of thinning of insulation on generator 3-D stator temperature field are analyzed.
Keywords:Large synchronous generator  thinning of insulation thickness  fluid field  finite volume method (FVM)  3D temperature filed  FEM performance analysis
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号